You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
77 lines
2.5 KiB
77 lines
2.5 KiB
# STM32L010-Nucleo BSP Introduction
|
|
|
|
[中文](README_zh.md)
|
|
|
|
## MCU: STM32L010RB @32MHz, 128KB FLASH, 20KB RAM
|
|
|
|
#### KEY FEATURES
|
|
|
|
- Ultra-low-power platform
|
|
- 1.8 V to 3.6 V power supply
|
|
- –40 to 85 °C temperature range
|
|
- 0.29 µA Standby mode (2 wakeup pins)
|
|
- 0.43 µA Stop mode (16 wakeup lines)
|
|
- 0.86 µA Stop mode + RTC + 20-Kbyte RAM retention
|
|
- Down to 93 µA/MHz in Run mode
|
|
- 5 µs wakeup time (from Flash memory)
|
|
- 41 µA 12-bit ADC conversion at 10 ksps
|
|
- Core: Arm® 32-bit Cortex®-M0+
|
|
- From 32 kHz to 32 MHz
|
|
- 0.95 DMIPS/MHz
|
|
- Reset and supply management
|
|
- Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
|
|
- Ultra-low-power POR/PDR
|
|
- Clock sources
|
|
- 0 to 32 MHz external clock
|
|
- 32 kHz oscillator for RTC with calibration
|
|
- High-speed internal 16 MHz factory-trimmed RC (±1%)
|
|
- Internal low-power 37 kHz RC
|
|
- Internal multispeed low-power 65 kHz to 4.2 MHz RC
|
|
- PLL for CPU clock
|
|
- Pre-programmed bootloader
|
|
- USART, I2C, SPI supported
|
|
- Development support
|
|
- Serial wire debug supported
|
|
- 51 fast I/Os (45 I/Os 5-Volt tolerant)
|
|
- Memories
|
|
- 128-Kbyte Flash memory
|
|
- 20-Kbyte RAM
|
|
- 512 bytes of data EEPROM
|
|
- 20-byte backup register
|
|
- Sector protection against R/W operation
|
|
- Analog peripherals
|
|
- 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V)
|
|
|
|
- 7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers
|
|
- 4x peripherals communication interface
|
|
- 1x USART (ISO7816), 1x LPUART (low power)
|
|
- 1x SPI 16 Mbit/s
|
|
- 1x I2C (SMBus/PMBus)
|
|
- 8x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC and 2x watchdogs (independent/window)
|
|
- CRC calculation unit, 96-bit unique ID
|
|
- LFQFP64 package is ECOPACK2 compliant
|
|
|
|
|
|
|
|
## Read more
|
|
|
|
| Documents | Description |
|
|
| :----------------------------------------------------------: | :----------------------------------------------------------: |
|
|
| [STM32_Nucleo-64_BSP_Introduction](../docs/STM32_Nucleo-64_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-64 boards (**Must-Read**) |
|
|
| [STM32L010RB ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32l010rb.html#documentation) | STM32L010RB datasheet and other resources |
|
|
|
|
|
|
|
|
## Maintained By
|
|
|
|
[xph](https://github.com/xupenghu), <xupenghu@outlook.com>
|
|
|
|
|
|
|
|
## Translated By
|
|
|
|
Meco Man @ RT-Thread Community
|
|
|
|
> jiantingman@foxmail.com
|
|
>
|
|
> https://github.com/mysterywolf |