You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
90 lines
3.4 KiB
90 lines
3.4 KiB
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2018-11-06 SummerGift first version
|
|
*/
|
|
|
|
#include "board.h"
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 400000000 (Cortex-M7 CPU Clock)
|
|
* HCLK(Hz) = 200000000 (Cortex-M4 CPU, Bus matrix Clocks)
|
|
* AHB Prescaler = 2
|
|
* D1 APB3 Prescaler = 2 (APB3 Clock 100MHz)
|
|
* D2 APB1 Prescaler = 2 (APB1 Clock 100MHz)
|
|
* D2 APB2 Prescaler = 2 (APB2 Clock 100MHz)
|
|
* D3 APB4 Prescaler = 2 (APB4 Clock 100MHz)
|
|
* HSE Frequency(Hz) = 25000000
|
|
* PLL_M = 5
|
|
* PLL_N = 160
|
|
* PLL_P = 2
|
|
* PLL_Q = 4
|
|
* PLL_R = 2
|
|
* VDD(V) = 3.3
|
|
* Flash Latency(WS) = 4
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
HAL_StatusTypeDef ret = HAL_OK;
|
|
|
|
/*!< Supply configuration update enable */
|
|
HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY);
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
|
|
RCC_OscInitStruct.CSIState = RCC_CSI_OFF;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
|
|
RCC_OscInitStruct.PLL.PLLM = 5;
|
|
RCC_OscInitStruct.PLL.PLLN = 160;
|
|
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
|
RCC_OscInitStruct.PLL.PLLP = 2;
|
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 4;
|
|
|
|
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
|
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
|
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
if(ret != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure bus clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \
|
|
RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1);
|
|
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
|
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
|
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
|
|
if(ret != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|