You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
366 lines
9.8 KiB
366 lines
9.8 KiB
/*
|
|
* Copyright (c) 2006-2022, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2022-3-08 GuEe-GUI the first version
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
|
|
#include <board.h>
|
|
|
|
/*
|
|
* The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
|
|
* LCR is written whilst busy. If it is, then a busy detect interrupt is
|
|
* raised, the LCR needs to be rewritten and the uart status register read.
|
|
*/
|
|
|
|
#define UART_RX 0 /* In: Receive buffer */
|
|
#define UART_TX 0 /* Out: Transmit buffer */
|
|
|
|
#define UART_DLL 0 /* Out: Divisor Latch Low */
|
|
#define UART_DLM 1 /* Out: Divisor Latch High */
|
|
|
|
#define UART_IER 1 /* Out: Interrupt Enable Register */
|
|
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
|
|
|
|
#define UART_SSR 0x22 /* In: Software Reset Register */
|
|
#define UART_USR 0x1f /* UART Status Register */
|
|
|
|
#define UART_LCR 3 /* Out: Line Control Register */
|
|
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
|
|
#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
|
|
#define UART_LCR_PARITY 0x8 /* Parity Enable */
|
|
#define UART_LCR_STOP 0x4 /* Stop bits: 0=1 bit, 1=2 bits */
|
|
#define UART_LCR_WLEN8 0x3 /* Wordlength: 8 bits */
|
|
|
|
#define UART_MCR 4 /* Out: Modem Control Register */
|
|
#define UART_MCR_RTS 0x02 /* RTS complement */
|
|
|
|
#define UART_LSR 5 /* In: Line Status Register */
|
|
#define UART_LSR_BI 0x10 /* Break interrupt indicator */
|
|
#define UART_LSR_DR 0x01 /* Receiver data ready */
|
|
|
|
#define UART_IIR 2 /* In: Interrupt ID Register */
|
|
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
|
|
#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
|
|
#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
|
|
|
|
#define UART_FCR 2 /* Out: FIFO Control Register */
|
|
#define UART_FCR_EN_FIFO 0x01 /* Enable the FIFO */
|
|
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
|
|
#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
|
|
|
|
#define UART_REG_SHIFT 0x2 /* Register Shift*/
|
|
#define UART_INPUT_CLK 24000000
|
|
|
|
struct hw_uart_device
|
|
{
|
|
rt_ubase_t hw_base;
|
|
rt_uint32_t irqno;
|
|
#ifdef RT_USING_SMP
|
|
struct rt_spinlock spinlock;
|
|
#endif
|
|
};
|
|
|
|
#define BSP_DEFINE_UART_DEVICE(no) \
|
|
static struct hw_uart_device _uart##no##_device = \
|
|
{ \
|
|
UART##no##_MMIO_BASE, \
|
|
UART##no##_IRQ \
|
|
}; \
|
|
static struct rt_serial_device _serial##no;
|
|
|
|
#ifdef RT_USING_UART0
|
|
BSP_DEFINE_UART_DEVICE(0);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART1
|
|
BSP_DEFINE_UART_DEVICE(1);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
BSP_DEFINE_UART_DEVICE(2);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
BSP_DEFINE_UART_DEVICE(3);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
BSP_DEFINE_UART_DEVICE(4);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
BSP_DEFINE_UART_DEVICE(5);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
BSP_DEFINE_UART_DEVICE(6);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART7
|
|
BSP_DEFINE_UART_DEVICE(7);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART8
|
|
BSP_DEFINE_UART_DEVICE(8);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART9
|
|
BSP_DEFINE_UART_DEVICE(9);
|
|
#endif
|
|
|
|
rt_inline rt_uint32_t dw8250_read32(rt_ubase_t addr, rt_ubase_t offset)
|
|
{
|
|
return *((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT)));
|
|
}
|
|
|
|
rt_inline void dw8250_write32(rt_ubase_t addr, rt_ubase_t offset, rt_uint32_t value)
|
|
{
|
|
*((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT))) = value;
|
|
|
|
if (offset == UART_LCR)
|
|
{
|
|
int tries = 1000;
|
|
|
|
/* Make sure LCR write wasn't ignored */
|
|
while (tries--)
|
|
{
|
|
unsigned int lcr = dw8250_read32(addr, UART_LCR);
|
|
|
|
if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
|
|
{
|
|
return;
|
|
}
|
|
|
|
dw8250_write32(addr, UART_FCR, UART_FCR_EN_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
|
|
dw8250_read32(addr, UART_RX);
|
|
|
|
*((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT))) = value;
|
|
}
|
|
}
|
|
}
|
|
|
|
static rt_err_t dw8250_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
rt_base_t base, rate;
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
#ifdef RT_USING_SMP
|
|
rt_spin_lock_init(&uart->spinlock);
|
|
#endif
|
|
|
|
/* Resset UART */
|
|
dw8250_write32(base, UART_SSR, 1);
|
|
dw8250_write32(base, UART_SSR, 0);
|
|
|
|
dw8250_write32(base, UART_IER, !UART_IER_RDI);
|
|
dw8250_write32(base, UART_FCR, UART_FCR_EN_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
|
|
|
|
/* Disable flow ctrl */
|
|
dw8250_write32(base, UART_MCR, 0);
|
|
/* Clear RTS */
|
|
dw8250_write32(base, UART_MCR, dw8250_read32(base, UART_MCR) | UART_MCR_RTS);
|
|
|
|
rate = UART_INPUT_CLK / 16 / serial->config.baud_rate;
|
|
|
|
/* Enable access DLL & DLH */
|
|
dw8250_write32(base, UART_LCR, dw8250_read32(base, UART_LCR) | UART_LCR_DLAB);
|
|
dw8250_write32(base, UART_DLL, (rate & 0xff));
|
|
dw8250_write32(base, UART_DLM, (rate & 0xff00) >> 8);
|
|
/* Clear DLAB bit */
|
|
dw8250_write32(base, UART_LCR, dw8250_read32(base, UART_LCR) & (~UART_LCR_DLAB));
|
|
|
|
dw8250_write32(base, UART_LCR, (dw8250_read32(base, UART_LCR) & (~UART_LCR_WLEN8)) | UART_LCR_WLEN8);
|
|
dw8250_write32(base, UART_LCR, dw8250_read32(base, UART_LCR) & (~UART_LCR_STOP));
|
|
dw8250_write32(base, UART_LCR, dw8250_read32(base, UART_LCR) & (~UART_LCR_PARITY));
|
|
|
|
dw8250_write32(base, UART_IER, UART_IER_RDI);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t dw8250_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* Disable rx irq */
|
|
dw8250_write32(uart->hw_base, UART_IER, !UART_IER_RDI);
|
|
rt_hw_interrupt_mask(uart->irqno);
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* Enable rx irq */
|
|
dw8250_write32(uart->hw_base, UART_IER, UART_IER_RDI);
|
|
rt_hw_interrupt_umask(uart->irqno);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int dw8250_uart_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
rt_base_t base;
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
while ((dw8250_read32(base, UART_USR) & 0x2) == 0)
|
|
{
|
|
}
|
|
|
|
dw8250_write32(base, UART_TX, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int dw8250_uart_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch = -1;
|
|
rt_base_t base;
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
if ((dw8250_read32(base, UART_LSR) & 0x1))
|
|
{
|
|
ch = dw8250_read32(base, UART_RX) & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops _uart_ops =
|
|
{
|
|
dw8250_uart_configure,
|
|
dw8250_uart_control,
|
|
dw8250_uart_putc,
|
|
dw8250_uart_getc,
|
|
};
|
|
|
|
static void rt_hw_uart_isr(int irqno, void *param)
|
|
{
|
|
unsigned int iir, status;
|
|
struct rt_serial_device *serial = (struct rt_serial_device *)param;
|
|
struct hw_uart_device *uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
|
|
iir = dw8250_read32(uart->hw_base, UART_IIR);
|
|
|
|
/* If don't do this in non-DMA mode then the "RX TIMEOUT" interrupt will fire forever. */
|
|
if ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)
|
|
{
|
|
#ifdef RT_USING_SMP
|
|
rt_base_t level = rt_spin_lock_irqsave(&uart->spinlock);
|
|
#endif
|
|
|
|
status = dw8250_read32(uart->hw_base, UART_LSR);
|
|
|
|
if (!(status & (UART_LSR_DR | UART_LSR_BI)))
|
|
{
|
|
dw8250_read32(uart->hw_base, UART_RX);
|
|
}
|
|
|
|
#ifdef RT_USING_SMP
|
|
rt_spin_unlock_irqrestore(&uart->spinlock, level);
|
|
#endif
|
|
}
|
|
|
|
if (!(iir & UART_IIR_NO_INT))
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY)
|
|
{
|
|
/* Clear the USR */
|
|
dw8250_read32(uart->hw_base, UART_USR);
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
rt_uint32_t value;
|
|
struct hw_uart_device* uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
RT_UNUSED(value);
|
|
|
|
config.baud_rate = 1500000;
|
|
|
|
#define BSP_INSTALL_UART_DEVICE(no) \
|
|
uart = &_uart##no##_device; \
|
|
_serial##no.ops = &_uart_ops; \
|
|
_serial##no.config = config; \
|
|
rt_hw_serial_register(&_serial##no, "uart" #no, RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart); \
|
|
rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial##no, "uart" #no);
|
|
|
|
#ifdef RT_USING_UART0
|
|
BSP_INSTALL_UART_DEVICE(0);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART1
|
|
BSP_INSTALL_UART_DEVICE(1);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
BSP_INSTALL_UART_DEVICE(2);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
BSP_INSTALL_UART_DEVICE(3);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
HWREG32(CRU_BASE + 0x370) = 0xFFFF0000 | (0x600) |(HWREG32(CRU_BASE + 0x370) & 0xF0FF);
|
|
value = HWREG32(0xFDC60000 + 0x48);
|
|
value &= ~((7 << 8) | (7 << 4));
|
|
value |= 0xFFFF0000 | (4 << 8) | (4 << 4);
|
|
HWREG32(0xFDC60000 + 0x48) = value;
|
|
HWREG32(0xFDC60000 + 0x30C) = 0xFFFF0000 | (1 << 14) | HWREG32(0xFDC60000 + 0x30C);
|
|
BSP_INSTALL_UART_DEVICE(4);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
BSP_INSTALL_UART_DEVICE(5);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
BSP_INSTALL_UART_DEVICE(6);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART7
|
|
BSP_INSTALL_UART_DEVICE(7);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART8
|
|
BSP_INSTALL_UART_DEVICE(8);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART9
|
|
BSP_INSTALL_UART_DEVICE(9);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|