You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
190 lines
6.7 KiB
190 lines
6.7 KiB
#ifndef __RASPI4_H__
|
|
#define __RASPI4_H__
|
|
//https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/rpi_DATA_2711_1p0.pdf
|
|
|
|
#define __REG32(x) (*((volatile unsigned int *)(x)))
|
|
#define __REG16(x) (*((volatile unsigned short *)(x)))
|
|
|
|
/* GIC IRQ MAX */
|
|
#define MAX_HANDLERS (256)
|
|
|
|
/* base address */
|
|
#define PER_BASE (0xFE000000)
|
|
|
|
//gpio offset
|
|
#define GPIO_BASE_OFFSET (0x00200000)
|
|
|
|
//pl011 offset
|
|
#define PL011_UART0_BASE_OFFSET (0x00201000)
|
|
#define PL011_UART2_BASE_OFFSET (0x00201400)
|
|
#define PL011_UART3_BASE_OFFSET (0x00201600)
|
|
#define PL011_UART4_BASE_OFFSET (0x00201800)
|
|
#define PL011_UART5_BASE_OFFSET (0x00201A00)
|
|
|
|
//pactl cs offset
|
|
#define PACTL_CS_OFFSET (0x00204E00)
|
|
|
|
//aux offset
|
|
#define AUX_BASE_OFFSET (0x00215000)
|
|
|
|
/* GPIO */
|
|
#define GPIO_BASE (PER_BASE + GPIO_BASE_OFFSET)
|
|
#define GPIO_IRQ_NUM (3) //40 pin mode
|
|
#define IRQ_GPIO0 (96 + 49) //bank0 (0 to 27)
|
|
#define IRQ_GPIO1 (96 + 50) //bank1 (28 to 45)
|
|
#define IRQ_GPIO2 (96 + 51) //bank2 (46 to 57)
|
|
#define IRQ_GPIO3 (96 + 52) //bank3
|
|
|
|
/* Timer (ARM side) */
|
|
#define ARM_TIMER_IRQ (64)
|
|
#define ARM_TIMER_BASE (PER_BASE + 0xB000)
|
|
#define ARM_TIMER_LOAD HWREG32(ARM_TIMER_BASE + 0x400)
|
|
#define ARM_TIMER_VALUE HWREG32(ARM_TIMER_BASE + 0x404)
|
|
#define ARM_TIMER_CTRL HWREG32(ARM_TIMER_BASE + 0x408)
|
|
#define ARM_TIMER_IRQCLR HWREG32(ARM_TIMER_BASE + 0x40C)
|
|
#define ARM_TIMER_RAWIRQ HWREG32(ARM_TIMER_BASE + 0x410)
|
|
#define ARM_TIMER_MASKIRQ HWREG32(ARM_TIMER_BASE + 0x414)
|
|
#define ARM_TIMER_RELOAD HWREG32(ARM_TIMER_BASE + 0x418)
|
|
#define ARM_TIMER_PREDIV HWREG32(ARM_TIMER_BASE + 0x41C)
|
|
#define ARM_TIMER_CNTR HWREG32(ARM_TIMER_BASE + 0x420)
|
|
|
|
/* UART PL011 */
|
|
#define UART0_BASE (PER_BASE + PL011_UART0_BASE_OFFSET)
|
|
#define UART2_BASE (PER_BASE + PL011_UART2_BASE_OFFSET)
|
|
#define UART3_BASE (PER_BASE + PL011_UART3_BASE_OFFSET)
|
|
#define UART4_BASE (PER_BASE + PL011_UART4_BASE_OFFSET)
|
|
#define UART5_BASE (PER_BASE + PL011_UART5_BASE_OFFSET)
|
|
#define IRQ_AUX_UART (96 + 29)
|
|
#define UART_REFERENCE_CLOCK (48000000)
|
|
|
|
/* AUX */
|
|
#define AUX_BASE (PER_BASE + AUX_BASE_OFFSET)
|
|
#define IRQ_PL011 (96 + 57)
|
|
|
|
/* SPI */
|
|
#define SPI_0_BASE_OFFSET (0x00204000)
|
|
#define SPI_3_BASE_OFFSET (0x00204600)
|
|
#define SPI_4_BASE_OFFSET (0x00204800)
|
|
#define SPI_5_BASE_OFFSET (0x00204A00)
|
|
#define SPI_6_BASE_OFFSET (0x00204C00)
|
|
|
|
#define SPI_0_BASE (PER_BASE + SPI_0_BASE_OFFSET)
|
|
#define SPI_3_BASE (PER_BASE + SPI_3_BASE_OFFSET)
|
|
#define SPI_4_BASE (PER_BASE + SPI_4_BASE_OFFSET)
|
|
#define SPI_5_BASE (PER_BASE + SPI_5_BASE_OFFSET)
|
|
#define SPI_6_BASE (PER_BASE + SPI_6_BASE_OFFSET)
|
|
/* Peripheral IRQ OR-ing */
|
|
#define PACTL_CS HWREG32((PER_BASE + PACTL_CS_OFFSET))
|
|
typedef enum {
|
|
IRQ_SPI0 = 0x00000000,
|
|
IRQ_SPI1 = 0x00000002,
|
|
IRQ_SPI2 = 0x00000004,
|
|
IRQ_SPI3 = 0x00000008,
|
|
IRQ_SPI4 = 0x00000010,
|
|
IRQ_SPI5 = 0x00000020,
|
|
IRQ_SPI6 = 0x00000040,
|
|
IRQ_I2C0 = 0x00000100,
|
|
IRQ_I2C1 = 0x00000200,
|
|
IRQ_I2C2 = 0x00000400,
|
|
IRQ_I2C3 = 0x00000800,
|
|
IRQ_I2C4 = 0x00001000,
|
|
IRQ_I2C5 = 0x00002000,
|
|
IRQ_I2C6 = 0x00004000,
|
|
IRQ_I2C7 = 0x00008000,
|
|
IRQ_UART5 = 0x00010000,
|
|
IRQ_UART4 = 0x00020000,
|
|
IRQ_UART3 = 0x00040000,
|
|
IRQ_UART2 = 0x00080000,
|
|
IRQ_UART0 = 0x00100000
|
|
} PACTL_CS_VAL;
|
|
|
|
// 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control
|
|
#define CORE0_TIMER_IRQ_CTRL HWREG32(0xFF800040)
|
|
#define TIMER_IRQ 30
|
|
#define NON_SECURE_TIMER_IRQ (1 << 1)
|
|
|
|
/* GIC */
|
|
#define INTC_BASE (0xff800000)
|
|
#define ARM_GIC_NR_IRQS (512)
|
|
#define ARM_GIC_MAX_NR (512)
|
|
#define GIC_V2_DISTRIBUTOR_BASE (INTC_BASE + 0x00041000)
|
|
#define GIC_V2_CPU_INTERFACE_BASE (INTC_BASE + 0x00042000)
|
|
#define GIC_V2_HYPERVISOR_BASE (INTC_BASE + 0x00044000)
|
|
#define GIC_V2_VIRTUAL_CPU_BASE (INTC_BASE + 0x00046000)
|
|
|
|
#define GIC_PL400_DISTRIBUTOR_PPTR GIC_V2_DISTRIBUTOR_BASE
|
|
#define GIC_PL400_CONTROLLER_PPTR GIC_V2_CPU_INTERFACE_BASE
|
|
|
|
#define GIC_IRQ_START 0
|
|
|
|
#define GIC_ACK_INTID_MASK 0x000003ff
|
|
|
|
//watchdog
|
|
#define PM_RSTC HWREG32(PER_BASE + 0x0010001c)
|
|
#define PM_RSTS HWREG32(PER_BASE + 0x00100020)
|
|
#define PM_WDOG HWREG32(PER_BASE + 0x00100024)
|
|
|
|
#define PM_PASSWORD (0x5A000000)
|
|
#define PM_WDOG_TIME_SET (0x000fffff)
|
|
#define PM_RSTS_HADWRH_SET (0x00000040)
|
|
#define PM_RSTC_WRCFG_FULL_RESET (0x00000020)
|
|
#define PM_RSTC_WRCFG_CLR (0xffffffcf)
|
|
#define PM_RSTC_RESET (0x00000102)
|
|
|
|
//timer
|
|
#define ST_BASE_OFFSET (0x003000)
|
|
#define STIMER_BASE (PER_BASE + ST_BASE_OFFSET)
|
|
#define STIMER_CS __REG32(STIMER_BASE + 0x0000)
|
|
#define STIMER_CLO __REG32(STIMER_BASE + 0x0004)
|
|
#define STIMER_CHI __REG32(STIMER_BASE + 0x0008)
|
|
#define STIMER_C0 __REG32(STIMER_BASE + 0x000C)
|
|
#define STIMER_C1 __REG32(STIMER_BASE + 0x0010)
|
|
#define STIMER_C2 __REG32(STIMER_BASE + 0x0014)
|
|
#define STIMER_C3 __REG32(STIMER_BASE + 0x0018)
|
|
|
|
#define DELAY_MICROS(micros) \
|
|
do{ \
|
|
rt_uint32_t compare = STIMER_CLO + micros * 25; \
|
|
while (STIMER_CLO < compare); \
|
|
} while (0) \
|
|
|
|
//External Mass Media Controller (SD Card)
|
|
#define MMC0_BASE_ADDR (PER_BASE+0x300000)
|
|
#define MMC2_BASE_ADDR (PER_BASE+0x340000)
|
|
|
|
#define ETH_IRQ (160+29)
|
|
|
|
//I2C
|
|
#define BSC0_BASE_OFFSET (0x205000)
|
|
#define BSC1_BASE_OFFSET (0x804000)
|
|
#define BSC3_BASE_OFFSET (0x205600)
|
|
#define BSC4_BASE_OFFSET (0x205800)
|
|
#define BSC5_BASE_OFFSET (0x205A80)
|
|
#define BSC6_BASE_OFFSET (0x205C00)
|
|
|
|
//BSC2 and BSC7 masters are dedicated for use by the
|
|
//HDMI interfaces and should not be accessed byuser programs.
|
|
#define BSC0_BASE (PER_BASE + BSC0_BASE_OFFSET)
|
|
#define BSC1_BASE (PER_BASE + BSC1_BASE_OFFSET)
|
|
#define BSC3_BASE (PER_BASE + BSC3_BASE_OFFSET)
|
|
#define BSC4_BASE (PER_BASE + BSC4_BASE_OFFSET)
|
|
#define BSC5_BASE (PER_BASE + BSC5_BASE_OFFSET)
|
|
#define BSC6_BASE (PER_BASE + BSC6_BASE_OFFSET)
|
|
|
|
/* the basic constants and interfaces needed by gic */
|
|
rt_inline rt_uint32_t platform_get_gic_dist_base(void)
|
|
{
|
|
return GIC_PL400_DISTRIBUTOR_PPTR;
|
|
}
|
|
|
|
rt_inline rt_uint32_t platform_get_gic_cpu_base(void)
|
|
{
|
|
return GIC_PL400_CONTROLLER_PPTR;
|
|
}
|
|
|
|
static inline void __DSB(void)
|
|
{
|
|
__asm__ volatile ("dsb 0xF":::"memory");
|
|
}
|
|
|
|
#endif
|
|
|