用于EagleEye3.0 规则集漏报和误报测试的示例项目,项目收集于github和gitee
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

77 lines
2.1 KiB

/*
* This file is only used for doxygen document generation.
*/
/**
* @defgroup bsp Hardware Related Package
*
* @brief Hardware Related Package includes board support package(BSP) and CSP(Chip
* Support Package).
*
* Board Support Package(BSP) is the hardware related wrapper, for example, peripherals
* in board, the pinmux setting etc. In RT-Thread RTOS, the bsp is placed under bsp
* directory.
*
* Chip Support Package(CSP) is a software set that contains chip specific software.
* A CSP usually includes operating system porting and peripheral device drivers inside
* chip. In RT-Thread RTOS, the csp is placed under libcpu directory.
*/
/**
* @addtogroup bsp
* @{
*/
/**
* This function will return current system interrupt status and disable system
* interrupt.
*
* @return the current system interrupt status.
*/
rt_base_t rt_hw_interrupt_disable(void);
/**
* This function will set the specified interrupt status, which shall saved by
* rt_hw_intterrupt_disable function. If the saved interrupt status is interrupt
* opened, this function will open system interrupt status.
*
* @param level the interrupt status to be set.
*/
void rt_hw_interrupt_enable(rt_base_t level);
/**
* This function initializes interrupt.
*/
void rt_hw_interrupt_init(void);
/**
* This function masks the specified interrupt.
*
* @param vector the interrupt number to be masked.
*
* @note not all of platform provide this function.
*/
void rt_hw_interrupt_mask(int vector);
/**
* This function umasks the specified interrupt.
*
* @param vector the interrupt number to be unmasked.
*
* @note not all of platform provide this function.
*/
void rt_hw_interrupt_umask(int vector);
/**
* This function will install specified interrupt handler.
*
* @param vector the interrupt number to be installed.
* @param new_handler the new interrupt handler.
* @param old_handler the old interrupt handler. This parameter can be RT_NULL.
*
* @note not all of platform provide this function.
*/
void rt_hw_interrupt_install(int vector, rt_isr_handler_t new_handler,
rt_isr_handler_t *old_handler);
/**@}*/