You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
143 lines
3.9 KiB
143 lines
3.9 KiB
# README #
|
|
|
|
This repository, maintained by SiFive, Inc, makes it easy to get started developing software for the Freedom E RISC-V platform.
|
|
|
|
### Contents ###
|
|
|
|
* RISC-V Software Toolchain
|
|
* RISC-V Debugging Toolchain
|
|
* Board Support Packages for FE310 and Development Kits
|
|
* A Few Example Programs
|
|
|
|
### Setting up the SDK ###
|
|
|
|
First, clone this repository:
|
|
|
|
```
|
|
git clone --recursive https://github.com/sifive/freedom-e-sdk.git
|
|
```
|
|
|
|
To see Makefile options:
|
|
|
|
```
|
|
cd freedom-e-sdk
|
|
make help
|
|
```
|
|
|
|
#### Building Tools from Source ####
|
|
|
|
Ubuntu packages needed:
|
|
|
|
$ sudo apt-get install autoconf automake libmpc-dev libmpfr-dev libgmp-dev gawk bison flex texinfo libtool libusb-1.0-0-dev make g++ pkg-config libexpat1-dev zlib1g-dev
|
|
|
|
Next, build the tools:
|
|
|
|
```
|
|
cd freedom-e-sdk
|
|
make tools [BOARD=freedom-e300-hifive1]
|
|
```
|
|
|
|
If your machine has enough resources, you can speed up the build process by adding `-j n` to `make`, where `n` is the number of processors of your build system.
|
|
|
|
|
|
#### Using Pre-Built Binary Tools ####
|
|
|
|
If you would like to avoid compiling the tools from source, they are
|
|
available as pre-built binaries from
|
|
|
|
https://sifive.com/products/tools
|
|
|
|
For OpenOCD and/or RISC-V GNU Toolchain,
|
|
download the .tar.gz for your platform, and unpack it to
|
|
your desired location. Then, use the `RISC_PATH` and `RISCV_OPENOCD_PATH`
|
|
variables when attempting to use the tools:
|
|
|
|
```
|
|
cp openocd-<date>-<platform>.tar.gz /my/desired/location/
|
|
cp riscv64-unknown-elf-gcc-<date>-<platform>.tar.gz /my/desired/location
|
|
cd /my/desired/location
|
|
tar -xvf openocd-<date>-<platform>.tar.gz
|
|
tar -xvf riscv64-unknown-elf-gcc-<date>-<platform>.tar.gz
|
|
export RISCV_OPENOCD_PATH=/my/desired/location/openocd
|
|
export RISCV_PATH=/my/desired/location/riscv64-unknown-elf-gcc-<date>-<version>
|
|
```
|
|
|
|
### Updating your SDK ###
|
|
|
|
If you'd like to update your SDK to the latest version:
|
|
|
|
```
|
|
cd freedom-e-sdk
|
|
git pull origin master
|
|
git submodule update --init --recursive
|
|
```
|
|
|
|
If you would like to recompile the entire toolchain after performing the above:
|
|
|
|
```
|
|
make uninstall
|
|
make tools
|
|
```
|
|
### Using the Tools ###
|
|
|
|
To compile a bare-metal RISC-V program:
|
|
|
|
```
|
|
cd freedom-e-sdk
|
|
make software [PROGRAM=demo_gpio] [BOARD=freedom-e300-hifive1]
|
|
```
|
|
|
|
Run `make help` for more commands.
|
|
|
|
### Benchmarking ###
|
|
|
|
#### Dhrystone ####
|
|
|
|
After setting up the software and debug toolchains, you can build and
|
|
execute everyone's favorite benchmark as follows:
|
|
|
|
- Compile the benchmark with the command `make software PROGRAM=dhrystone`.
|
|
- Run on the HiFive1 board with the command `make upload PROGRAM=dhrystone`.
|
|
This will take a few minutes. Sample output is provided below.
|
|
- Compute DMIPS by dividing the Dhrystones per Second result by 1757, which
|
|
was the VAX 11/780's performance. In the example below, 729927 / 1757 =
|
|
415 DMIPS.
|
|
- Compute DMIPS/MHz by dividing by the clock rate: in the example below,
|
|
415 / 260 = 1.60 DMIPS/MHz.
|
|
|
|
```
|
|
core freq at 259830579 Hz
|
|
|
|
Dhrystone Benchmark, Version 2.1 (Language: C)
|
|
|
|
<snip>
|
|
|
|
Microseconds for one run through Dhrystone: 1.3
|
|
Dhrystones per Second: 729927.0
|
|
```
|
|
|
|
#### CoreMark ####
|
|
|
|
We cannot distribute the CoreMark benchmark, but following are instructions
|
|
to download and run the benchmark on the HiFive1 board:
|
|
|
|
- Download CoreMark from EEMBC's web site and extract the archive from
|
|
http://www.eembc.org/coremark/download.php.
|
|
- Copy the following files from the extracted archive into the
|
|
`software/coremark` directory in this repository:
|
|
- `core_list_join.c`
|
|
- `core_main.c`
|
|
- `coremark.h`
|
|
- `core_matrix.c`
|
|
- `core_state.c`
|
|
- `core_util.c`
|
|
- Compile the benchmark with the command `make software PROGRAM=coremark`.
|
|
- Run on the HiFive1 board with the command `make upload PROGRAM=coremark`.
|
|
- Divide the reported Iterations/Sec by the reported core frequency in MHz to
|
|
obtain a CoreMarks/MHz value.
|
|
|
|
### For More Information ###
|
|
|
|
Documentation, Forums, and much more available at
|
|
|
|
[dev.sifive.com](https://dev.sifive.com)
|
|
|