You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
470 lines
26 KiB
470 lines
26 KiB
//*****************************************************************************
|
|
//
|
|
// lpc.h - Prototypes for the Low Pin Count (LPC) driver.
|
|
//
|
|
// Copyright (c) 2010-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __LPC_H__
|
|
#define __LPC_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// If building with a C++ compiler, make all of the definitions in this header
|
|
// have a C binding.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to LPCConfigSet as the ulConfig value, and
|
|
// returned from LPCConfigGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CFG_WAKE 0x00000100 // Restart the LPC Bus
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be returned from LPCStatus.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_STATUS_RST 0x00000400 // LPC is in Reset
|
|
#define LPC_STATUS_BUSY 0x00000200 // LPC is Busy
|
|
#define LPC_STATUS_SLEEP 0x00000100 // LPC is in Sleep Mode
|
|
#define LPC_STATUS_CA7 0x00000080 // Channel 7 Active
|
|
#define LPC_STATUS_CA6 0x00000040 // Channel 6 Active
|
|
#define LPC_STATUS_CA5 0x00000020 // Channel 5 Active
|
|
#define LPC_STATUS_CA4 0x00000010 // Channel 4 Active
|
|
#define LPC_STATUS_CA3 0x00000008 // Channel 3 Active
|
|
#define LPC_STATUS_CA2 0x00000004 // Channel 2 Active
|
|
#define LPC_STATUS_CA1 0x00000002 // Channel 1 Active
|
|
#define LPC_STATUS_CA0 0x00000001 // Channel 0 Active
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to LPCIRQSet and LPCIRQClear in the ulIRQ
|
|
// parameter and returned from LPCIRQGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IRQ15 0x80000000 // Serial IRQ15
|
|
#define LPC_IRQ14 0x40000000 // Serial IRQ14
|
|
#define LPC_IRQ13 0x20000000 // Serial IRQ13
|
|
#define LPC_IRQ12 0x10000000 // Serial IRQ12
|
|
#define LPC_IRQ11 0x08000000 // Serial IRQ11
|
|
#define LPC_IRQ10 0x04000000 // Serial IRQ10
|
|
#define LPC_IRQ9 0x02000000 // Serial IRQ9
|
|
#define LPC_IRQ8 0x01000000 // Serial IRQ8
|
|
#define LPC_IRQ7 0x00800000 // Serial IRQ7
|
|
#define LPC_IRQ6 0x00400000 // Serial IRQ6
|
|
#define LPC_IRQ5 0x00200000 // Serial IRQ5
|
|
#define LPC_IRQ4 0x00100000 // Serial IRQ4
|
|
#define LPC_IRQ3 0x00080000 // Serial IRQ3
|
|
#define LPC_IRQ2 0x00040000 // Serial IRQ2
|
|
#define LPC_IRQ1 0x00020000 // Serial IRQ1
|
|
#define LPC_IRQ0 0x00010000 // Serial IRQ0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Addition values that can be returned from LPCIRQGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IRQ_BUSY 0x00000004 // SERIRQ frame in progress
|
|
#define LPC_IRQ_CONT 0x00000001 // SERIRQ in Continuous Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed as the ulChannel parameter in LPCChannel...
|
|
// API calls.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CHAN_CH0 0 // LPC Channel 0
|
|
#define LPC_CHAN_CH1 1 // LPC Channel 1
|
|
#define LPC_CHAN_CH2 2 // LPC Channel 2
|
|
#define LPC_CHAN_CH3 3 // LPC Channel 3
|
|
#define LPC_CHAN_CH4 4 // LPC Channel 4
|
|
#define LPC_CHAN_CH5 5 // LPC Channel 5
|
|
#define LPC_CHAN_CH6 6 // LPC Channel 6
|
|
#define LPC_CHAN_CH7 7 // LPC Channel 7 (COMx)
|
|
#define LPC_CHAN_COMx 7 // LPC Channel 7 (COMx)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed as part of the ulConfig parameter in the
|
|
// LPCChannelConfig... functions.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CHAN_IRQSEL2_NONE 0x00000000 // LPC Channel IRQSEL2 Disabled
|
|
#define LPC_CHAN_IRQSEL2_IRQ0 0x00080000 // LPC Channel IRQSEL2 IRQ0
|
|
#define LPC_CHAN_IRQSEL2_IRQ1 0x10080000 // LPC Channel IRQSEL2 IRQ1
|
|
#define LPC_CHAN_IRQSEL2_IRQ2 0x20080000 // LPC Channel IRQSEL2 IRQ2
|
|
#define LPC_CHAN_IRQSEL2_IRQ3 0x30080000 // LPC Channel IRQSEL2 IRQ3
|
|
#define LPC_CHAN_IRQSEL2_IRQ4 0x40080000 // LPC Channel IRQSEL2 IRQ4
|
|
#define LPC_CHAN_IRQSEL2_IRQ5 0x50080000 // LPC Channel IRQSEL2 IRQ5
|
|
#define LPC_CHAN_IRQSEL2_IRQ6 0x60080000 // LPC Channel IRQSEL2 IRQ6
|
|
#define LPC_CHAN_IRQSEL2_IRQ7 0x70080000 // LPC Channel IRQSEL2 IRQ7
|
|
#define LPC_CHAN_IRQSEL2_IRQ8 0x80080000 // LPC Channel IRQSEL2 IRQ8
|
|
#define LPC_CHAN_IRQSEL2_IRQ9 0x90080000 // LPC Channel IRQSEL2 IRQ9
|
|
#define LPC_CHAN_IRQSEL2_IRQ10 0xA0080000 // LPC Channel IRQSEL2 IRQ10
|
|
#define LPC_CHAN_IRQSEL2_IRQ11 0xB0080000 // LPC Channel IRQSEL2 IRQ11
|
|
#define LPC_CHAN_IRQSEL2_IRQ12 0xC0080000 // LPC Channel IRQSEL2 IRQ12
|
|
#define LPC_CHAN_IRQSEL2_IRQ13 0xD0080000 // LPC Channel IRQSEL2 IRQ13
|
|
#define LPC_CHAN_IRQSEL2_IRQ14 0xE0080000 // LPC Channel IRQSEL2 IRQ14
|
|
#define LPC_CHAN_IRQSEL2_IRQ15 0xF0080000 // LPC Channel IRQSEL2 IRQ15
|
|
|
|
#define LPC_CHAN_COMxIRQ_DISABLE \
|
|
0x00000000 // LCP Channel COMx IRQ Disabled
|
|
#define LPC_CHAN_COMxIRQ_ENABLE 0x00080000 // LCP Channel COMx IRQ Enabled
|
|
|
|
#define LPC_CHAN_IRQSEL1_NONE 0x00000000 // LPC Channel IRQSEL1 Disabled
|
|
#define LPC_CHAN_IRQSEL1_IRQ0 0x00040000 // LPC Channel IRQSEL1 IRQ0
|
|
#define LPC_CHAN_IRQSEL1_IRQ1 0x01040000 // LPC Channel IRQSEL1 IRQ1
|
|
#define LPC_CHAN_IRQSEL1_IRQ2 0x02040000 // LPC Channel IRQSEL1 IRQ2
|
|
#define LPC_CHAN_IRQSEL1_IRQ3 0x03040000 // LPC Channel IRQSEL1 IRQ3
|
|
#define LPC_CHAN_IRQSEL1_IRQ4 0x04040000 // LPC Channel IRQSEL1 IRQ4
|
|
#define LPC_CHAN_IRQSEL1_IRQ5 0x05040000 // LPC Channel IRQSEL1 IRQ5
|
|
#define LPC_CHAN_IRQSEL1_IRQ6 0x06040000 // LPC Channel IRQSEL1 IRQ6
|
|
#define LPC_CHAN_IRQSEL1_IRQ7 0x07040000 // LPC Channel IRQSEL1 IRQ7
|
|
#define LPC_CHAN_IRQSEL1_IRQ8 0x08040000 // LPC Channel IRQSEL1 IRQ8
|
|
#define LPC_CHAN_IRQSEL1_IRQ9 0x09040000 // LPC Channel IRQSEL1 IRQ9
|
|
#define LPC_CHAN_IRQSEL1_IRQ10 0x0A040000 // LPC Channel IRQSEL1 IRQ10
|
|
#define LPC_CHAN_IRQSEL1_IRQ11 0x0B040000 // LPC Channel IRQSEL1 IRQ11
|
|
#define LPC_CHAN_IRQSEL1_IRQ12 0x0C040000 // LPC Channel IRQSEL1 IRQ12
|
|
#define LPC_CHAN_IRQSEL1_IRQ13 0x0D040000 // LPC Channel IRQSEL1 IRQ13
|
|
#define LPC_CHAN_IRQSEL1_IRQ14 0x0E040000 // LPC Channel IRQSEL1 IRQ14
|
|
#define LPC_CHAN_IRQSEL1_IRQ15 0x0F040000 // LPC Channel IRQSEL1 IRQ15
|
|
|
|
#define LPC_CHAN_IRQSEL0_NONE 0x00000000 // LPC Channel IRQSEL0 Disabled
|
|
#define LPC_CHAN_IRQSEL0_IRQ0 0x00000000 // LPC Channel IRQSEL0 IRQ0
|
|
#define LPC_CHAN_IRQSEL0_IRQ1 0x00100000 // LPC Channel IRQSEL0 IRQ1
|
|
#define LPC_CHAN_IRQSEL0_IRQ2 0x00200000 // LPC Channel IRQSEL0 IRQ2
|
|
#define LPC_CHAN_IRQSEL0_IRQ3 0x00300000 // LPC Channel IRQSEL0 IRQ3
|
|
#define LPC_CHAN_IRQSEL0_IRQ4 0x00400000 // LPC Channel IRQSEL0 IRQ4
|
|
#define LPC_CHAN_IRQSEL0_IRQ5 0x00500000 // LPC Channel IRQSEL0 IRQ5
|
|
#define LPC_CHAN_IRQSEL0_IRQ6 0x00600000 // LPC Channel IRQSEL0 IRQ6
|
|
#define LPC_CHAN_IRQSEL0_IRQ7 0x00700000 // LPC Channel IRQSEL0 IRQ7
|
|
#define LPC_CHAN_IRQSEL0_IRQ8 0x00800000 // LPC Channel IRQSEL0 IRQ8
|
|
#define LPC_CHAN_IRQSEL0_IRQ9 0x00900000 // LPC Channel IRQSEL0 IRQ9
|
|
#define LPC_CHAN_IRQSEL0_IRQ10 0x00A00000 // LPC Channel IRQSEL0 IRQ10
|
|
#define LPC_CHAN_IRQSEL0_IRQ11 0x00B00000 // LPC Channel IRQSEL0 IRQ11
|
|
#define LPC_CHAN_IRQSEL0_IRQ12 0x00C00000 // LPC Channel IRQSEL0 IRQ12
|
|
#define LPC_CHAN_IRQSEL0_IRQ13 0x00D00000 // LPC Channel IRQSEL0 IRQ13
|
|
#define LPC_CHAN_IRQSEL0_IRQ14 0x00E00000 // LPC Channel IRQSEL0 IRQ14
|
|
#define LPC_CHAN_IRQSEL0_IRQ15 0x00F00000 // LPC Channel IRQSEL0 IRQ15
|
|
#define LPC_CHAN_IRQEN0_OFF 0x00000000 // LPC Channel IRQEN0 Disabled
|
|
#define LPC_CHAN_IRQEN0_TRG1 0x00010000 // LPC Channel IRQEN0 Trigger 1
|
|
#define LPC_CHAN_IRQEN0_TRG2 0x00020000 // LPC Channel IRQEN0 Trigger 2
|
|
#define LPC_CHAN_IRQEN0_TRG3 0x00030000 // LPC Channel IRQEN0 Trigger 3
|
|
|
|
#define LPC_CHAN_MBARB_ENABLED 0x00000000 // LPC Channel Mailbox Arbritration
|
|
// enabled.
|
|
#define LPC_CHAN_MBARB_DISABLED 0x00008000 // LPC Channel Mailbox Arbritration
|
|
// disabled.
|
|
|
|
#define LPC_CHAN_SIZE_4 0x00000000 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_8 0x00000004 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_16 0x00000008 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_32 0x0000000C // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_64 0x00000010 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_128 0x00000014 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_256 0x00000018 // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
#define LPC_CHAN_SIZE_512 0x0000001C // Mailbox IO/Memory Window size
|
|
// is 4 Bytes.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to LCPChannelConfigCOMxSet as the ulCOMxMode
|
|
// parameter or returned from LPCChannelConfigGet in the pulCOMxMode
|
|
// parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_COMx_MODE_FRMHNML 0x00000000 // Normal From Host model.
|
|
#define LPC_COMx_MODE_FRMHIGN 0x00020000 // Ignore From Host data.
|
|
#define LPC_COMx_MODE_FRMHDMA 0x00040000 // COMx DMA on From Host data to
|
|
// memory
|
|
#define LPC_COMx_MODE_UARTDMA 0x00060000 // COMx DMA on From Host data to
|
|
// UART1
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Additinal values that can be returned from LPCChannelConfigGet in the
|
|
// pulCOMxMode parameter.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_COMx_ENABLED 0x00010000 // COMx mode enabled.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to LPCIntEnable, LPCIntDisable, and LPCIntClear
|
|
// as the ulIntFlags parameter and returned by LPCIntStatus.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_INT_RST 0x80000000 // LPC Bus Enters or Exits
|
|
// Reset State.
|
|
#define LPC_INT_SLEEP 0x40000000 // LPC Bus Enters or Exits
|
|
// Sleep State.
|
|
#define LPC_INT_COMx 0x20000000 // COMx has read/written
|
|
// data.
|
|
#define LPC_INT_SIRQ 0x10000000 // SERIRQ frame has completed
|
|
#define LPC_INT_CH6_EP_TO_HOST (1 << 24) // To-Host has been read.
|
|
#define LPC_INT_CH6_EP_FROM_DATA \
|
|
(2 << 24) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH6_EP_FROM_CMD (4 << 24) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH6_MB_HOST_WON (1 << 24) // Host Won (HW1ST)
|
|
#define LPC_INT_CH6_MB_HOST_WRITE \
|
|
(2 << 24) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH6_MB_HOST_READ \
|
|
(4 << 24) // Host Read Last Byte
|
|
#define LPC_INT_CH6_MB_MCU_LOST (8 << 24) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH5_EP_TO_HOST (1 << 20) // To-Host has been read.
|
|
#define LPC_INT_CH5_EP_FROM_DATA \
|
|
(2 << 20) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH5_EP_FROM_CMD (4 << 20) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH5_MB_HOST_WON (1 << 20) // Host Won (HW1ST)
|
|
#define LPC_INT_CH5_MB_HOST_WRITE \
|
|
(2 << 20) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH5_MB_HOST_READ \
|
|
(4 << 20) // Host Read Last Byte
|
|
#define LPC_INT_CH5_MB_MCU_LOST (8 << 20) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH4_EP_TO_HOST (1 << 16) // To-Host has been read.
|
|
#define LPC_INT_CH4_EP_FROM_DATA \
|
|
(2 << 16) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH4_EP_FROM_CMD (4 << 16) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH4_MB_HOST_WON (1 << 16) // Host Won (HW1ST)
|
|
#define LPC_INT_CH4_MB_HOST_WRITE \
|
|
(2 << 16) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH4_MB_HOST_READ \
|
|
(4 << 16) // Host Read Last Byte
|
|
#define LPC_INT_CH4_MB_MCU_LOST (8 << 16) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH3_EP_TO_HOST (1 << 12) // To-Host has been read.
|
|
#define LPC_INT_CH3_EP_FROM_DATA \
|
|
(2 << 12) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH3_EP_FROM_CMD (4 << 12) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH3_MB_HOST_WON (1 << 12) // Host Won (HW1ST)
|
|
#define LPC_INT_CH3_MB_HOST_WRITE \
|
|
(2 << 12) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH3_MB_HOST_READ \
|
|
(4 << 12) // Host Read Last Byte
|
|
#define LPC_INT_CH3_MB_MCU_LOST (8 << 12) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH2_EP_TO_HOST (1 << 8) // To-Host has been read.
|
|
#define LPC_INT_CH2_EP_FROM_DATA \
|
|
(2 << 8) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH2_EP_FROM_CMD (4 << 8) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH2_MB_HOST_WON (1 << 8) // Host Won (HW1ST)
|
|
#define LPC_INT_CH2_MB_HOST_WRITE \
|
|
(2 << 8) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH2_MB_HOST_READ \
|
|
(4 << 8) // Host Read Last Byte
|
|
#define LPC_INT_CH2_MB_MCU_LOST (8 << 8) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH1_EP_TO_HOST (1 << 4) // To-Host has been read.
|
|
#define LPC_INT_CH1_EP_FROM_DATA \
|
|
(2 << 4) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH1_EP_FROM_CMD (4 << 4) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH1_MB_HOST_WON (1 << 4) // Host Won (HW1ST)
|
|
#define LPC_INT_CH1_MB_HOST_WRITE \
|
|
(2 << 4) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH1_MB_HOST_READ \
|
|
(4 << 4) // Host Read Last Byte
|
|
#define LPC_INT_CH1_MB_MCU_LOST (8 << 4) // MCU Lost (when host had HW1ST).
|
|
#define LPC_INT_CH0_EP_TO_HOST (1 << 0) // To-Host has been read.
|
|
#define LPC_INT_CH0_EP_FROM_DATA \
|
|
(2 << 0) // From-Host has been written as
|
|
// data.
|
|
#define LPC_INT_CH0_EP_FROM_CMD (4 << 0) // From-Host has been written as
|
|
// command.
|
|
#define LPC_INT_CH0_MB_HOST_WON (1 << 0) // Host Won (HW1ST)
|
|
#define LPC_INT_CH0_MB_HOST_WRITE \
|
|
(2 << 0) // Host Wrote Last Byte.
|
|
#define LPC_INT_CH0_MB_HOST_READ \
|
|
(4 << 0) // Host Read Last Byte
|
|
#define LPC_INT_CH0_MB_MCU_LOST (8 << 0) // MCU Lost (when host had HW1ST).
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to LPCCOMxInt... functions as the ulIntFlags
|
|
// parameter and returned by LPCIntStatus.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_COMx_INT_CX 0x02000000 // Raw Event State for COMx
|
|
#define LPC_COMx_INT_CXTX 0x01000000 // Raw Event State for COMx TX
|
|
#define LPC_COMx_INT_CXRX 0x00800000 // Raw Event State for COMx RX
|
|
#define LPC_COMx_MASK_CX 0x00200000 // Event Mask for COMx
|
|
#define LPC_COMx_MASK_CXTX 0x00100000 // Event Mask for COMx TX
|
|
#define LPC_COMx_MASK_CXRX 0x00080000 // Event Mask for COMx RX
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to the LPCChannelDMAConfigSet function as part
|
|
// of the ulConfig or ulMask parameter, or can be returned from the
|
|
// LPCChannelConfigGet function.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_DMA_CH3_WEN 0x00000080 // Trigger DMA for "To Host" data
|
|
// buffer is empty.
|
|
#define LPC_DMA_CH3_REN 0x00000040 // Trigger DMA when "From Host"
|
|
// data buffer is full.
|
|
#define LPC_DMA_CH2_WEN 0x00000020 // Trigger DMA for "To Host" data
|
|
// buffer is empty.
|
|
#define LPC_DMA_CH2_REN 0x00000010 // Trigger DMA when "From Host"
|
|
// data buffer is full.
|
|
#define LPC_DMA_CH1_WEN 0x00000008 // Trigger DMA for "To Host" data
|
|
// buffer is empty.
|
|
#define LPC_DMA_CH1_REN 0x00000004 // Trigger DMA when "From Host"
|
|
// data buffer is full.
|
|
#define LPC_DMA_CH0_WEN 0x00000002 // Trigger DMA for "To Host" data
|
|
// buffer is empty.
|
|
#define LPC_DMA_CH0_REN 0x00000001 // Trigger DMA when "From Host"
|
|
// data buffer is full.
|
|
//*****************************************************************************
|
|
//
|
|
// Values that can be passed to the LPCChannelStatusSet and
|
|
// LPCChannelStatusClear function, and returned by the LPCChannelStatusGet
|
|
// function.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH_ST_USER0 0x00000100 // User Status Bit 0
|
|
#define LPC_CH_ST_USER1 0x00000200 // User Status Bit 1
|
|
#define LPC_CH_ST_USER2 0x00000400 // User Status Bit 2
|
|
#define LPC_CH_ST_USER3 0x00000800 // User Status Bit 3
|
|
#define LPC_CH_ST_USER4 0x00001000 // User Status Bit 4
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Additinoal values that can be returned by the LPCChannelStatusGet function.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH_ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH_ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH_ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH_ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH_ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH_ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH_ST_TOH 0x00000001 // To-Host Transaction
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Prototypes for the APIs.
|
|
//
|
|
//*****************************************************************************
|
|
extern void LPCConfigSet(unsigned long ulBase, unsigned long ulConfig);
|
|
extern unsigned long LPCConfigGet(unsigned long ulBase);
|
|
extern unsigned long LPCStatusGet(unsigned long ulBase,
|
|
unsigned long *pulCount,
|
|
unsigned long *pulPoolSize);
|
|
extern void LPCStatusBlockAddressSet(unsigned long ulBase,
|
|
unsigned long ulAddress,
|
|
tBoolean bEnabled);
|
|
extern unsigned LPCStatusBlockAddressGet(unsigned long ulBase);
|
|
extern void LPCSCIAssert(unsigned long ulBase, unsigned long ulCount);
|
|
extern void LPCIRQConfig(unsigned long ulBase, tBoolean bIRQPulse,
|
|
tBoolean bIRQOnChange);
|
|
extern void LPCIRQSet(unsigned long ulBase, unsigned long ulIRQ);
|
|
extern void LPCIRQClear(unsigned long ulBase, unsigned long ulIRQ);
|
|
extern unsigned long LPCIRQGet(unsigned long ulBase);
|
|
extern void LPCIRQSend(unsigned long ulBase);
|
|
extern void LPCIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
|
|
extern void LPCIntUnregister(unsigned long ulBase);
|
|
extern void LPCIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
|
|
extern void LPCIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
|
|
extern unsigned long LPCIntStatus(unsigned long ulBase, tBoolean bMasked);
|
|
extern void LPCIntClear(unsigned long ulBase, unsigned long ulIntFlags);
|
|
extern void LPCChannelEnable(unsigned long ulBase, unsigned long ulChannel);
|
|
extern void LPCChannelDisable(unsigned long ulBase, unsigned long ulChannel);
|
|
extern void LPCChannelConfigEPSet(unsigned long ulBase,
|
|
unsigned long ulChannel,
|
|
unsigned long ulConfig,
|
|
unsigned long ulAddress,
|
|
unsigned long ulOffset);
|
|
extern void LPCChannelConfigMBSet(unsigned long ulBase,
|
|
unsigned long ulChannel,
|
|
unsigned long ulConfig,
|
|
unsigned long ulAddress,
|
|
unsigned long ulOffset);
|
|
extern void LPCChannelConfigCOMxSet(unsigned long ulBase,
|
|
unsigned long ulChannel,
|
|
unsigned long ulConfig,
|
|
unsigned long ulAddress,
|
|
unsigned long ulOffset,
|
|
unsigned long ulCOMxMode);
|
|
extern unsigned long LPCChannelConfigGet(unsigned long ulBase,
|
|
unsigned long ulChannel,
|
|
unsigned long *pulAddress,
|
|
unsigned long *pulOffset,
|
|
unsigned long *pulCOMxMode);
|
|
extern unsigned long LPCChannelPoolAddressGet(unsigned long ulBase,
|
|
unsigned long ulChannel);
|
|
extern unsigned long LPCChannelStatusGet(unsigned long ulBase,
|
|
unsigned long ulChannel);
|
|
extern void LPCChannelStatusSet(unsigned long ulBase, unsigned long ulChannel,
|
|
unsigned long ulStatus);
|
|
extern void LPCChannelStatusClear(unsigned long ulBase,
|
|
unsigned long ulChannel,
|
|
unsigned long ulStatus);
|
|
extern void LPCChannelDMAConfigSet(unsigned long ulBase,
|
|
unsigned long ulConfig,
|
|
unsigned long ulMask);
|
|
extern unsigned long LPCChannelDMAConfigGet(unsigned long ulBase);
|
|
extern unsigned char LPCByteRead(unsigned long ulBase, unsigned long ulOffset);
|
|
extern void LPCByteWrite(unsigned long ulBase, unsigned long ulOffset,
|
|
unsigned char ucData);
|
|
extern unsigned short LPCHalfWordRead(unsigned long ulBase,
|
|
unsigned long ulOffset);
|
|
extern void LPCHalfWordWrite(unsigned long ulBase, unsigned long ulOffset,
|
|
unsigned short usData);
|
|
extern unsigned long LPCWordRead(unsigned long ulBase, unsigned long ulOffset);
|
|
extern void LPCWordWrite(unsigned long ulBase, unsigned long ulOffset,
|
|
unsigned long ulData);
|
|
extern void LPCCOMxIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
|
|
extern void LPCCOMxIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
|
|
extern unsigned long LPCCOMxIntStatus(unsigned long ulBase, tBoolean bMasked);
|
|
extern void LPCCOMxIntClear(unsigned long ulBase, unsigned long ulIntFlags);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Mark the end of the C bindings section for C++ compilers.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __LPC_H__
|
|
|