用于EagleEye3.0 规则集漏报和误报测试的示例项目,项目收集于github和gitee
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

232 lines
5.2 KiB

/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-03-28 qiujingbao first version
*/
#include "drv_spi.h"
#define DBG_TAG "drv.spi"
#define DBG_LVL DBG_INFO
#include <rtdbg.h>
static struct cv1800_spi cv1800_spi_obj[] =
{
#ifdef BSP_USING_SPI
{
.spi_id = SPI2,
.device_name = "spi2",
.fifo_len = SPI_TXFTLR,
},
#endif
};
static struct spi_regs *get_spi_base(uint8_t spi_id)
{
struct spi_regs *spi_base = NULL;
switch (spi_id)
{
case SPI0:
spi_base = (struct spi_regs *)SPI0_BASE;
break;
case SPI1:
spi_base = (struct spi_regs *)SPI1_BASE;
break;
case SPI2:
spi_base = (struct spi_regs *)SPI2_BASE;
break;
case SPI3:
spi_base = (struct spi_regs *)SPI3_BASE;
break;
}
return spi_base;
}
static rt_err_t drv_spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration)
{
rt_err_t ret = RT_EOK;
struct cv1800_spi *spi_dev = RT_NULL;
uint32_t mode;
spi_dev = (struct cv1800_spi *)(device->bus->parent.user_data);
spi_dev->data_width = configuration->data_width;
/* disable spi */
spi_enable(spi_dev->reg, 0);
/* clear irq */
spi_clear_irq(spi_dev->reg, SPI_IRQ_MSAK);
/* set clk */
ret = spi_set_frequency(spi_dev->reg, configuration->max_hz);
if (ret)
return ret;
/* set mode */
ret = gen_spi_mode(configuration, &mode);
if (ret)
return ret;
spi_set_mode(spi_dev->reg, mode);
/* set cs */
spi_enable_cs(spi_dev->reg, 0x1);
spi_enable(spi_dev->reg, 0x1);
mode = mmio_read_32((uintptr_t)&spi_dev->reg->spi_ctrl0);
LOG_D("mode: %x", mode);
mode = mmio_read_32((uintptr_t)&spi_dev->reg->spi_baudr);
LOG_D("spi_baudr: %x", mode);
return ret;
}
int hw_spi_recv(struct cv1800_spi *dev) {
uint32_t rever;
uint32_t tem;
int ret;
rever = mmio_read_32((uintptr_t)&dev->reg->spi_rxflr);
ret = (int)rever;
while (rever)
{
tem = mmio_read_32((uintptr_t)&dev->reg->spi_dr);
if (dev->recv_buf < dev->recv_end)
{
if (dev->data_width == 8)
*(uint8_t *)(dev->recv_buf) = tem;
else
*(uint16_t *)(dev->recv_buf) = tem;
}
else
{
return 0;
}
rever--;
dev->recv_buf += dev->data_width >> 3;
}
return ret;
}
int hw_spi_send(struct cv1800_spi *dev) {
uint32_t txflr;
uint32_t max;
uint16_t value;
txflr = mmio_read_32((uintptr_t)&dev->reg->spi_txflr);
max = dev->fifo_len - txflr;
while (max)
{
if (dev->send_end - dev->send_buf)
{
if (dev->data_width == 8)
value = *(uint8_t *)(dev->send_buf);
else
value = *(uint16_t *)(dev->send_buf);
}
else
{
return 0;
}
mmio_write_32((uintptr_t)&dev->reg->spi_dr, value);
dev->send_buf += dev->data_width >> 3;
max--;
}
return 0;
}
static rt_ssize_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message) {
int ret = 0;
struct cv1800_spi *spi_dev;
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(message != RT_NULL);
spi_dev = (struct cv1800_spi *)(device->bus->parent.user_data);
if (message->send_buf != RT_NULL)
{
spi_dev->send_buf = message->send_buf;
spi_dev->send_end = (void *)((uint8_t *)spi_dev->send_buf + message->length);
}
if (message->recv_buf != RT_NULL)
{
spi_dev->recv_buf = message->recv_buf;
spi_dev->recv_end = (void *)((uint8_t *)spi_dev->recv_buf + message->length);
}
/* if user use their cs */
if (message->cs_take && device->cs_pin != PIN_NONE)
rt_pin_write(device->cs_pin, PIN_LOW);
if (message->send_buf)
{
while (spi_dev->send_buf != spi_dev->send_end)
{
hw_spi_send(spi_dev);
}
/* wait for complete */
while (mmio_read_32((uintptr_t)&spi_dev->reg->spi_txflr)) {}
ret = message->length;
}
if (message->recv_buf)
{
while (spi_dev->recv_buf != spi_dev->recv_end)
{
hw_spi_recv(spi_dev);
}
ret = message->length;
}
if (message->cs_release && device->cs_pin != PIN_NONE)
rt_pin_write(device->cs_pin, PIN_HIGH);
return ret;
}
const static struct rt_spi_ops drv_spi_ops =
{
drv_spi_configure,
spixfer,
};
int rt_hw_spi_init(void)
{
rt_err_t ret = RT_EOK;
struct spi_regs *reg = NULL;
for (rt_size_t i = 0; i < sizeof(cv1800_spi_obj) / sizeof(struct cv1800_spi); i++) {
/* set reg base addr */
reg = get_spi_base(cv1800_spi_obj[i].spi_id);
if (!reg)
return -RT_ERROR;
cv1800_spi_obj[i].reg = reg;
cv1800_spi_obj[i].spi_bus.parent.user_data = &cv1800_spi_obj[i];
/* register spix bus */
ret = rt_spi_bus_register(&cv1800_spi_obj[i].spi_bus, cv1800_spi_obj[i].device_name, &drv_spi_ops);
}
return ret;
}
INIT_BOARD_EXPORT(rt_hw_spi_init);