用于EagleEye3.0 规则集漏报和误报测试的示例项目，项目收集于github和gitee

History

Guo XIn 291e661666 first commit		10 months ago
..
COMPONENT_CM0P	first commit	10 months ago
COMPONENT_CM4	first commit	10 months ago
config	first commit	10 months ago
deps	first commit	10 months ago
.cyignore	first commit	10 months ago
EULA	first commit	10 months ago
LICENSE	first commit	10 months ago
README.md	first commit	10 months ago
RELEASE.md	first commit	10 months ago
cybsp.c	first commit	10 months ago
cybsp.h	first commit	10 months ago
cybsp_doc.h	first commit	10 months ago
cybsp_hw_config.h	first commit	10 months ago
cybsp_types.h	first commit	10 months ago
props.json	first commit	10 months ago
system_psoc6.h	first commit	10 months ago

README.md

CY8CKIT-062S4 BSP

Overview

The PSoC™ 62S4 Pioneer Kit is a low-cost hardware platform that enables design and debug of the PSoC™ 62S4 Line (CY8C6244LQI-S4D92).

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

Delivers dual-cores, with a 150-MHz Arm Cortex-M4 as the primary application processor and a 100-MHz Arm Cortex-M0+ as the secondary processor.
256-KB Flash and 128-KB SRAM for customer application on CM4
One-time-programmable (OTP) 1-Kb eFuse array
Two 12-bit 2-Msps SAR ADCs with synchronized sampling, differential and single-ended modes, 16-channel sequencer with result averaging, and Deep Sleep operation
Two opamps with low-power operation modes and Two low-power comparators available in Deep Sleep and Hibernate modes
Onboard Thermistor and Ambient Light Sensor.
Serial memory interface
Industry-leading CAPSENSE
Ambient Light Sensor
Thermistor

Kit Contents:

CY8CKIT-062S4 evaluation board
USB Type-A to Micro-B cable
Quick Start Guide
Six jumper wires (5 inches each)

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CY8CKIT-062S4.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock	Source	Output Frequency
FLL	IMO	100.0 MHz
PLL	IMO	48.0 MHz
CLK_HF0	CLK_PATH0	100 MHz

Power Configuration

System Active Power Mode: LP
System Idle Power Mode: Deep Sleep
VDDA Voltage: 3300 mV
VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CY8CKIT-062S4 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.