用于EagleEye3.0 规则集漏报和误报测试的示例项目,项目收集于github和gitee
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1144 lines
19 KiB

source include/have_profiling.inc;
SET GLOBAL EVENT_SCHEDULER = OFF;
LET $OLD_DB= `SELECT DATABASE()`;
CREATE DATABASE db1;
USE db1;
CREATE TABLE t1 (a INT, KEY a(a)) ENGINE=INNODB;
INSERT INTO t1 VALUES (1),(2),(3),(4),(5);
CREATE TABLE t3 (a INT) ENGINE=InnoDB;
INSERT INTO t3 SELECT * FROM t1;
CREATE TABLE trans (a INT) ENGINE=INNODB;
DELIMITER |;
CREATE PROCEDURE test_if_commit()
BEGIN
ROLLBACK;
SELECT IF (COUNT(*) > 0, "YES", "NO") AS "IMPLICIT COMMIT" FROM trans;
DELETE FROM trans;
COMMIT;
END|
DELIMITER ;|
SET AUTOCOMMIT = FALSE;
--echo #
--echo # SQLCOM_SELECT
--echo #
let $statement=
select 1 as res from t1 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_TABLE LIKE
--echo #
let $statement=
create table t2 like t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE
--echo #
let $statement=
show create table t2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_TABLE
--echo #
let $statement=
drop table t2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_TABLE TEMPORARY
--echo #
let $statement=
create temporary table t2 as select * from t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_TABLE TEMPORARY
--echo #
let $statement=
drop temporary table t2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_TABLE
--echo #
let $statement=
create table t2 as select * from t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_UPDATE
--echo #
let $statement=
update t2 set a=a+1 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_INSERT
--echo #
let $statement=
insert into t2 set a=((1) in (select * from t1));
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_INSERT_SELECT
--echo #
let $statement=
insert into t2 select * from t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_REPLACE
--echo #
let $statement=
replace t2 set a=((1) in (select * from t1));
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_REPLACE_SELECT
--echo #
let $statement=
replace t2 select * from t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DELETE
--echo #
let $statement=
delete from t2 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DELETE_MULTI
--echo #
let $statement=
delete t2, t3 from t2, t3 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_UPDATE_MULTI
--echo #
select * from t2;
let $statement=
update t2, t3 set t3.a=t2.a, t2.a=null where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_LOAD
--echo #
create table t4 (a varchar(100));
let $statement=
load data infile '../../std_data/words.dat' into table t4;
source include/implicit_commit_helper.inc;
drop table t4;
--echo #
--echo # SQLCOM_SHOW_DATABASES
--echo #
let $statement=
show databases where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_TABLES
--echo #
let $statement=
show tables where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_FIELDS
--echo #
let $statement=
show fields from t1 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_KEYS
--echo #
let $statement=
show keys from t1 where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_VARIABLES
--echo #
let $statement=
show variables where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STATUS
--echo #
let $statement=
show status where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_ENGINE_MUTEX
--echo #
let $statement=
show engine all mutex;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_PROCESSLIST
--echo #
let $statement=
show processlist;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_ENGINE_LOGS
--echo #
let $statement=
show engine all logs;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_ENGINE_STATUS
--echo #
let $statement=
show engine all status;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CHARSETS
--echo #
let $statement=
show charset where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_COLLATIONS
--echo #
let $statement=
show collation where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_TABLE_STATUS
--echo #
let $statement=
show table status where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_TRIGGERS
--echo #
let $statement=
show triggers where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_OPEN_TABLES
--echo #
let $statement=
show open tables where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STATUS_PROC
--echo #
let $statement=
show procedure status where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STATUS_FUNC
--echo #
let $statement=
show function status where (1) in (select * from t1);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SET_OPTION
--echo #
let $statement=
set @a=((1) in (select * from t1));
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DO
--echo #
let $statement=
do ((1) in (select * from t1));
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CALL
--echo #
create procedure p1(a int) begin end;
let $statement=
call p1((1) in (select * from t1));
source include/implicit_commit_helper.inc;
drop procedure p1;
--echo #
--echo # SQLCOM_CREATE_VIEW
--echo #
let $statement=
create view v1 as select * from t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_VIEW
--echo #
let $statement=
alter view v1 as select 2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_VIEW
--echo #
let $statement=
drop view v1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_INDEX
--echo #
let $statement=
create index idx1 on t1(a);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_INDEX
--echo #
let $statement=
drop index idx1 on t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_TABLE
--echo #
let $statement=
alter table t1 add column b int;
source include/implicit_commit_helper.inc;
let $statement=
alter table t1 change b c int;
source include/implicit_commit_helper.inc;
let $statement=
alter table t1 drop column c;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_TABLE TEMPORARY
--echo #
create temporary table t4 (a int);
let $statement=
alter table t1 add column b int;
source include/implicit_commit_helper.inc;
let $statement=
alter table t1 change b c int;
source include/implicit_commit_helper.inc;
let $statement=
alter table t1 drop column c;
source include/implicit_commit_helper.inc;
drop table t4;
--echo #
--echo # SQLCOM_TRUNCATE
--echo #
insert into t2 select * from t1;
let $statement=
truncate table t2;
source include/implicit_commit_helper.inc;
insert into t2 select * from t1;
--echo #
--echo # SQLCOM_TRUNCATE TEMPORARY
--echo #
create temporary table t4 as select * from t1;
let $statement=
truncate table t4;
source include/implicit_commit_helper.inc;
drop temporary table t4;
--echo #
--echo # SQLCOM_SHOW_MASTER_STAT
--echo #
let $statement=
show master status;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_SLAVE_STAT
--echo #
let $statement=
show slave status;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_GRANT
--echo #
create user mysqltest_2@localhost;
let $statement=
grant all on test.t1 to mysqltest_2@localhost with grant option;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_REVOKE
--echo #
let $statement=
revoke select on test.t1 from mysqltest_2@localhost;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_REVOKE_ALL
--echo #
let $statement=
revoke all on test.t1 from mysqltest_2@localhost;
source include/implicit_commit_helper.inc;
drop user mysqltest_2@localhost;
--echo #
--echo # SQLCOM_SHOW_GRANTS
--echo #
let $statement=
show grants;
source include/implicit_commit_helper.inc;
let $statement=
show grants for current_user();
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_LOCK_TABLES
--echo #
let $statement=
lock tables t1 write, trans write;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_UNLOCK_TABLES
--echo #
let $statement=
unlock tables;
source include/implicit_commit_helper.inc;
#
# Missing test for lock tables transactional.
#
--echo #
--echo # SQLCOM_CREATE_DB
--echo #
let $statement=
create database db2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CHANGE_DB
--echo #
create table db2.t1 (a int);
insert into db2.t1 values (1);
commit;
let $statement=
use db2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE_DB
--echo #
let $statement=
show create database db2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_DB
--echo #
#let $statement=
# alter database db2 character set koi8r;
#source include/implicit_commit_helper.inc;
#let $statement=
# alter database db2 collate cp1251_general_cs;
#source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_DB
--echo #
use db1;
let $statement=
drop database db2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_REPAIR
--echo #
let $statement=
repair table t2;
source include/implicit_commit_helper.inc;
let $statement=
repair table t2 use_frm;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_OPTIMIZE
--echo #
let $statement=
optimize table t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CHECK
--echo #
let $statement=
check table t1;
source include/implicit_commit_helper.inc;
let $statement=
check table t1 extended;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ASSIGN_TO_KEYCACHE
--echo #
set global keycache.key_buffer_size=128*1024;
let $statement=
cache index t3 in keycache;
source include/implicit_commit_helper.inc;
set global keycache.key_buffer_size=0;
--echo #
--echo # SQLCOM_PRELOAD_KEYS
--echo #
let $statement=
load index into cache t3;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_FLUSH
--echo #
let $statement=
flush local privileges;
source include/implicit_commit_helper.inc;
let $statement=
flush privileges;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_KILL
--echo #
--echo #
--echo # SQLCOM_ANALYZE
--echo #
let $statement=
analyze table t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ROLLBACK
--echo #
let $statement=
rollback;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ROLLBACK_TO_SAVEPOINT
--echo #
--echo #
--echo # SQLCOM_COMMIT
--echo #
let $statement=
commit;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SAVEPOINT
--echo #
let $statement=
savepoint sp1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_RELEASE_SAVEPOINT
--echo #
--echo #
--echo # SQLCOM_SLAVE_START
--echo #
--echo #
--echo # SQLCOM_SLAVE_STOP
--echo #
--echo #
--echo # SQLCOM_BEGIN
--echo #
let $statement=
begin;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CHANGE_MASTER
--echo #
--echo #
--echo # SQLCOM_RENAME_TABLE
--echo #
let $statement=
rename table t3 to t4;
source include/implicit_commit_helper.inc;
let $statement=
rename table t4 to t3;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_PURGE
--echo #
--echo #
--echo # SQLCOM_PURGE_BEFORE
--echo #
--echo #
--echo # SQLCOM_SHOW_BINLOGS
--echo #
--echo #
--echo # SQLCOM_HA_OPEN
--echo #
let $statement=
handler t1 open as ha1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_HA_READ
--echo #
let $statement=
handler ha1 read a first;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_HA_CLOSE
--echo #
let $statement=
handler ha1 close;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_SLAVE_HOSTS
--echo #
let $statement=
show slave hosts;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_BINLOG_EVENTS
--echo #
let $statement=
show binlog events;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_NEW_MASTER
--echo #
--echo #
--echo # SQLCOM_SHOW_WARNS
--echo #
let $statement=
show warnings;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_EMPTY_QUERY
--echo #
--echo #
--echo # SQLCOM_SHOW_ERRORS
--echo #
let $statement=
show errors;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STORAGE_ENGINES
--echo #
let $statement=
show engines;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_PRIVILEGES
--echo #
let $statement=
show privileges;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_HELP
--echo #
let $statement=
help 'foo';
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_USER
--echo #
let $statement=
create user trxusr1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_RENAME_USER
--echo #
let $statement=
rename user 'trxusr1' to 'trxusr2';
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_USER
--echo #
let $statement=
drop user trxusr2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CHECKSUM
--echo #
let $statement=
checksum table t1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_PROCEDURE
--echo #
let $statement=
create procedure p1(a int) begin end;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_PROCEDURE
--echo #
let $statement=
alter procedure p1 comment 'foobar';
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE_PROC
--echo #
let $statement=
show create procedure p1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STATUS_PROC
--echo #
let $statement=
show procedure status;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_PROC_CODE
--echo #
#
# Available only on servers with debugging support.
#
--disable_abort_on_error
let $statement=
show procedure code p1;
source include/implicit_commit_helper.inc;
--enable_abort_on_error
--echo #
--echo # SQLCOM_DROP_PROCEDURE
--echo #
let $statement=
drop procedure p1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_FUNCTION
--echo #
--echo #
--echo # SQLCOM_DROP_FUNCTION
--echo #
--echo #
--echo # SQLCOM_CREATE_SPFUNCTION
--echo #
let $statement=
create function f1() returns int return 69;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_FUNCTION
--echo #
let $statement=
alter function f1 comment 'comment';
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE_FUNC
--echo #
let $statement=
show create function f1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_STATUS_FUNC
--echo #
let $statement=
show function status like '%f%';
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_FUNC_CODE
--echo #
#
# Available only on servers with debugging support.
#
--disable_abort_on_error
let $statement=
show function code f1;
source include/implicit_commit_helper.inc;
--enable_abort_on_error
--echo #
--echo # SQLCOM_PREPARE
--echo #
let $statement=
prepare stmt1 from "insert into t1 values (5)";
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_EXECUTE
--echo #
let $statement=
execute stmt1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DEALLOCATE_PREPARE
--echo #
let $statement=
deallocate prepare stmt1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_CREATE_TRIGGER
--echo #
let $statement=
create trigger trg1 before insert on t1 for each row set @a:=1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE_TRIGGER
--echo #
let $statement=
show create trigger trg1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_TRIGGER
--echo #
let $statement=
drop trigger trg1;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_XA_START
--echo #
--echo #
--echo # SQLCOM_XA_END
--echo #
--echo #
--echo # SQLCOM_XA_PREPARE
--echo #
--echo #
--echo # SQLCOM_XA_COMMIT
--echo #
--echo #
--echo # SQLCOM_XA_ROLLBACK
--echo #
--echo #
--echo # SQLCOM_XA_RECOVER
--echo #
--echo #
--echo # SQLCOM_ALTER_TABLESPACE
--echo #
let $statement=
CREATE TABLESPACE ts1 ADD DATAFILE './ts1.ibd' ENGINE=INNODB;
source include/implicit_commit_helper.inc;
let $statement=
DROP TABLESPACE ts1 ENGINE=INNODB;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_INSTALL_PLUGIN
--echo #
--echo #
--echo # SQLCOM_SHOW_PLUGINS
--echo #
--echo #
--echo # SQLCOM_UNINSTALL_PLUGIN
--echo #
--echo #
--echo # SQLCOM_BINLOG_BASE64_EVENT
--echo #
--echo #
--echo # SQLCOM_CREATE_SERVER
--echo #
--echo #
--echo # SQLCOM_ALTER_SERVER
--echo #
--echo #
--echo # SQLCOM_DROP_SERVER
--echo #
--echo #
--echo # SQLCOM_CREATE_EVENT
--echo #
let $statement=
create event ev1 on schedule every 1 second do insert into t1 values (6);
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_ALTER_EVENT
--echo #
let $statement=
alter event ev1 rename to ev2 disable;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_CREATE_EVENT
--echo #
let $statement=
show create event ev2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_EVENTS
--echo #
let $statement=
show events;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_DROP_EVENT
--echo #
let $statement=
drop event ev2;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_BACKUP
--echo #
#create database backup_db;
#
#let $statement=
# backup database db1 to 'backup_db1.ba';
#source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_ARCHIVE
--echo #
#
# --error ER_NOT_ALLOWED_COMMAND
#
#let $statement=
# show backup 'backup_db1.ba';
#source include/implicit_commit_helper.inc;
#
--echo #
--echo # SQLCOM_RESTORE
--echo #
#let $statement=
# restore from 'backup_db1.ba';
#source include/implicit_commit_helper.inc;
#--remove_file $MYSQLTEST_VARDIR/master-data/backup_db1.ba
#
#drop database backup_db;
--echo #
--echo # SQLCOM_BACKUP_TEST
--echo #
# BACKUP_TEST
--echo #
--echo # SQLCOM_SHOW_PROFILE
--echo #
let $statement=
show profile memory;
source include/implicit_commit_helper.inc;
--echo #
--echo # SQLCOM_SHOW_PROFILES
--echo #
let $statement=
show profiles;
source include/implicit_commit_helper.inc;
DROP TABLE t1;
DROP TABLE t2;
DROP TABLE t3;
eval USE $OLD_DB;
DROP DATABASE db1;
SET GLOBAL EVENT_SCHEDULER = ON;
--source include/running_event_scheduler.inc
--echo End of tests