test-example-projects/c++_projects/280w-mysql-8.0.18/mysql-test/r/range_mrr.result

set optimizer_switch='mrr=on,mrr_cost_based=off';
drop table if exists t1, t2, t3;
SET sql_mode = 'NO_ENGINE_SUBSTITUTION';
CREATE TABLE t1 (
event_date date DEFAULT '0000-00-00' NOT NULL,
type int(11) DEFAULT '0' NOT NULL,
event_id int(11) DEFAULT '0' NOT NULL,
PRIMARY KEY (event_date,type,event_id)
);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES ('1999-07-10',100100,24), ('1999-07-11',100100,25),
('1999-07-13',100600,0), ('1999-07-13',100600,4), ('1999-07-13',100600,26),
('1999-07-14',100600,10), ('1999-07-15',100600,16), ('1999-07-15',100800,45),
('1999-07-15',101000,47), ('1999-07-16',100800,46), ('1999-07-20',100600,5),
('1999-07-20',100600,27), ('1999-07-21',100600,11), ('1999-07-22',100600,17),
('1999-07-23',100100,39), ('1999-07-24',100100,39), ('1999-07-24',100500,40),
('1999-07-25',100100,39), ('1999-07-27',100600,1), ('1999-07-27',100600,6),
('1999-07-27',100600,28), ('1999-07-28',100600,12), ('1999-07-29',100500,41),
('1999-07-29',100600,18), ('1999-07-30',100500,41), ('1999-07-31',100500,41),
('1999-08-01',100700,34), ('1999-08-03',100600,7), ('1999-08-03',100600,29),
('1999-08-04',100600,13), ('1999-08-05',100500,42), ('1999-08-05',100600,19),
('1999-08-06',100500,42), ('1999-08-07',100500,42), ('1999-08-08',100500,42),
('1999-08-10',100600,2), ('1999-08-10',100600,9), ('1999-08-10',100600,30),
('1999-08-11',100600,14), ('1999-08-12',100600,20), ('1999-08-17',100500,8),
('1999-08-17',100600,31), ('1999-08-18',100600,15), ('1999-08-19',100600,22),
('1999-08-24',100600,3), ('1999-08-24',100600,32), ('1999-08-27',100500,43),
('1999-08-31',100600,33), ('1999-09-17',100100,37), ('1999-09-18',100100,37),
('1999-09-19',100100,37), ('2000-12-18',100700,38);
explain select event_date,type,event_id from t1 WHERE event_date >= "1999-07-01" AND event_date < "1999-07-15" AND (type=100600 OR type=100100) ORDER BY event_date;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	7	NULL	6	19.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`event_date` AS `event_date`,`test`.`t1`.`type` AS `type`,`test`.`t1`.`event_id` AS `event_id` from `test`.`t1` where ((`test`.`t1`.`event_date` >= DATE'1999-07-01') and (`test`.`t1`.`event_date` < DATE'1999-07-15') and ((`test`.`t1`.`type` = 100600) or (`test`.`t1`.`type` = 100100))) order by `test`.`t1`.`event_date`
explain format=tree select event_date,type,event_id from t1 WHERE event_date >= "1999-07-01" AND event_date < "1999-07-15" AND (type=100600 OR type=100100) ORDER BY event_date;
EXPLAIN
-> Filter: ((t1.event_date >= DATE'1999-07-01') and (t1.event_date < DATE'1999-07-15') and ((t1.`type` = 100600) or (t1.`type` = 100100)))  (cost=1.50 rows=1)
    -> Index range scan on t1 using PRIMARY  (cost=1.50 rows=6)

select event_date,type,event_id from t1 WHERE event_date >= "1999-07-01" AND event_date < "1999-07-15" AND (type=100600 OR type=100100) ORDER BY event_date;
event_date	type	event_id
1999-07-10	100100	24
1999-07-11	100100	25
1999-07-13	100600	0
1999-07-13	100600	4
1999-07-13	100600	26
1999-07-14	100600	10
explain select event_date,type,event_id from t1 WHERE type = 100601 and event_date >= "1999-07-01" AND event_date < "1999-07-15" AND (type=100600 OR type=100100) ORDER BY event_date;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible WHERE
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`event_date` AS `event_date`,`test`.`t1`.`type` AS `type`,`test`.`t1`.`event_id` AS `event_id` from `test`.`t1` where false order by `test`.`t1`.`event_date`
select event_date,type,event_id from t1 WHERE event_date >= "1999-07-01" AND event_date <= "1999-07-15" AND (type=100600 OR type=100100) or event_date >= "1999-07-01" AND event_date <= "1999-07-15" AND type=100099;
event_date	type	event_id
1999-07-10	100100	24
1999-07-11	100100	25
1999-07-13	100600	0
1999-07-13	100600	4
1999-07-13	100600	26
1999-07-14	100600	10
1999-07-15	100600	16
drop table t1;
CREATE TABLE t1 (
PAPER_ID smallint(6) DEFAULT '0' NOT NULL,
YEAR smallint(6) DEFAULT '0' NOT NULL,
ISSUE smallint(6) DEFAULT '0' NOT NULL,
CLOSED tinyint(4) DEFAULT '0' NOT NULL,
ISS_DATE date DEFAULT '0000-00-00' NOT NULL,
PRIMARY KEY (PAPER_ID,YEAR,ISSUE)
);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES (3,1999,34,0,'1999-07-12'), (1,1999,111,0,'1999-03-23'),
(1,1999,222,0,'1999-03-23'), (3,1999,33,0,'1999-07-12'),
(3,1999,32,0,'1999-07-12'), (3,1999,31,0,'1999-07-12'),
(3,1999,30,0,'1999-07-12'), (3,1999,29,0,'1999-07-12'),
(3,1999,28,0,'1999-07-12'), (1,1999,40,1,'1999-05-01'),
(1,1999,41,1,'1999-05-01'), (1,1999,42,1,'1999-05-01'),
(1,1999,46,1,'1999-05-01'), (1,1999,47,1,'1999-05-01'),
(1,1999,48,1,'1999-05-01'), (1,1999,49,1,'1999-05-01'),
(1,1999,50,0,'1999-05-01'), (1,1999,51,0,'1999-05-01'),
(1,1999,200,0,'1999-06-28'), (1,1999,52,0,'1999-06-28'),
(1,1999,53,0,'1999-06-28'), (1,1999,54,0,'1999-06-28'),
(1,1999,55,0,'1999-06-28'), (1,1999,56,0,'1999-07-01'),
(1,1999,57,0,'1999-07-01'), (1,1999,58,0,'1999-07-01'),
(1,1999,59,0,'1999-07-01'), (1,1999,60,0,'1999-07-01'),
(3,1999,35,0,'1999-07-12');
select YEAR,ISSUE from t1 where PAPER_ID=3 and (YEAR>1999 or (YEAR=1999 and ISSUE>28))  order by YEAR,ISSUE;
YEAR	ISSUE
1999	29
1999	30
1999	31
1999	32
1999	33
1999	34
1999	35
check table t1;
Table	Op	Msg_type	Msg_text
test.t1	check	status	OK
repair table t1;
Table	Op	Msg_type	Msg_text
test.t1	repair	status	OK
drop table t1;
CREATE TABLE t1 (
id int(11) NOT NULL auto_increment,
parent_id int(11) DEFAULT '0' NOT NULL,
level tinyint(4) DEFAULT '0' NOT NULL,
PRIMARY KEY (id),
KEY parent_id (parent_id),
KEY level (level)
);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES (1,0,0), (3,1,1), (4,1,1), (8,2,2), (9,2,2), (17,3,2),
(22,4,2), (24,4,2), (28,5,2), (29,5,2), (30,5,2), (31,6,2), (32,6,2), (33,6,2),
(203,7,2), (202,7,2), (20,3,2), (157,0,0), (193,5,2), (40,7,2), (2,1,1),
(15,2,2), (6,1,1), (34,6,2), (35,6,2), (16,3,2), (7,1,1), (36,7,2), (18,3,2),
(26,5,2), (27,5,2), (183,4,2), (38,7,2), (25,5,2), (37,7,2), (21,4,2),
(19,3,2), (5,1,1), (179,5,2);
SELECT * FROM t1 WHERE level = 1 AND parent_id = 1;
id	parent_id	level
3	1	1
4	1	1
2	1	1
6	1	1
7	1	1
5	1	1
SELECT * FROM t1 WHERE level = 1 AND parent_id = 1 order by id;
id	parent_id	level
2	1	1
3	1	1
4	1	1
5	1	1
6	1	1
7	1	1
drop table t1;
create table t1(
Satellite		varchar(25)	not null,
SensorMode		varchar(25)	not null,
FullImageCornersUpperLeftLongitude	double	not null,
FullImageCornersUpperRightLongitude	double	not null,
FullImageCornersUpperRightLatitude	double	not null,
FullImageCornersLowerRightLatitude	double	not null,
index two (Satellite, SensorMode, FullImageCornersUpperLeftLongitude, FullImageCornersUpperRightLongitude, FullImageCornersUpperRightLatitude, FullImageCornersLowerRightLatitude));
insert into t1 values("OV-3","PAN1",91,-92,40,50);
insert into t1 values("OV-4","PAN1",91,-92,40,50);
select * from t1 where t1.Satellite = "OV-3" and t1.SensorMode = "PAN1" and t1.FullImageCornersUpperLeftLongitude > -90.000000 and t1.FullImageCornersUpperRightLongitude < -82.000000;
Satellite	SensorMode	FullImageCornersUpperLeftLongitude	FullImageCornersUpperRightLongitude	FullImageCornersUpperRightLatitude	FullImageCornersLowerRightLatitude
OV-3	PAN1	91	-92	40	50
drop table t1;
create table t1 ( aString char(100) not null default "", key aString (aString(10)) );
insert t1 (aString) values ( "believe in myself" ), ( "believe" ), ("baaa" ), ( "believe in love");
select * from t1 where aString < "believe in myself" order by aString;
aString
baaa
believe
believe in love
select * from t1 where aString > "believe in love" order by aString;
aString
believe in myself
alter table t1 drop key aString;
select * from t1 where aString < "believe in myself" order by aString;
aString
baaa
believe
believe in love
select * from t1 where aString > "believe in love" order by aString;
aString
believe in myself
drop table t1;
CREATE TABLE t1 (
t1ID int(10) unsigned NOT NULL auto_increment,
art binary(1) NOT NULL default '',
KNR char(5) NOT NULL default '',
RECHNR char(6) NOT NULL default '',
POSNR char(2) NOT NULL default '',
ARTNR char(10) NOT NULL default '',
TEX char(70) NOT NULL default '',
PRIMARY KEY  (t1ID),
KEY IdxArt (art),
KEY IdxKnr (KNR),
KEY IdxArtnr (ARTNR)
) ENGINE=MyISAM;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 (art) VALUES ('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),('j'),('J'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),
('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j'),('j');
select count(*) from t1 where upper(art) = 'J';
count(*)
213
select count(*) from t1 where art = 'J' or art = 'j';
count(*)
602
select count(*) from t1 where art = 'j' or art = 'J';
count(*)
602
select count(*) from t1 where art = 'j';
count(*)
389
select count(*) from t1 where art = 'J';
count(*)
213
drop table t1;
create table t1 (x int, y int, index(x), index(y));
insert into t1 (x) values (1),(2),(3),(4),(5),(6),(7),(8),(9);
update t1 set y=x;
analyze table t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
explain select * from t1, t1 t2 where t1.y = 8 and t2.x between 7 and t1.y+0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	2	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 8) and (`test`.`t2`.`x` between 7 and <cache>((8 + 0))))
explain select * from t1, t1 t2 where t1.y = 8 and t2.x >= 7 and t2.x <= t1.y+0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	2	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 8) and (`test`.`t2`.`x` >= 7) and (`test`.`t2`.`x` <= <cache>((8 + 0))))
explain select * from t1, t1 t2 where t1.y = 2 and t2.x between t1.y-1 and t1.y+1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	3	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 2) and (`test`.`t2`.`x` between <cache>((2 - 1)) and <cache>((2 + 1))))
explain select * from t1, t1 t2 where t1.y = 2 and t2.x >= t1.y-1 and t2.x <= t1.y+1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	3	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 2) and (`test`.`t2`.`x` >= <cache>((2 - 1))) and (`test`.`t2`.`x` <= <cache>((2 + 1))))
explain select * from t1, t1 t2 where t1.y = 2 and t2.x between 0 and t1.y;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	2	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 2) and (`test`.`t2`.`x` between 0 and 2))
explain select * from t1, t1 t2 where t1.y = 2 and t2.x >= 0 and t2.x <= t1.y;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	y	y	5	const	1	100.00	NULL
1	SIMPLE	t2	NULL	range	x	x	5	NULL	2	100.00	Using where; Using MRR; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`x` AS `x`,`test`.`t1`.`y` AS `y`,`test`.`t2`.`x` AS `x`,`test`.`t2`.`y` AS `y` from `test`.`t1` join `test`.`t1` `t2` where ((`test`.`t1`.`y` = 2) and (`test`.`t2`.`x` >= 0) and (`test`.`t2`.`x` <= 2))
explain select count(*) from t1 where x in (1);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	x	x	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select count(0) AS `count(*)` from `test`.`t1` where (`test`.`t1`.`x` = 1)
explain select count(*) from t1 where x in (1,2);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	5	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select count(0) AS `count(*)` from `test`.`t1` where (`test`.`t1`.`x` in (1,2))
drop table t1;
CREATE TABLE t1 (key1 int(11) NOT NULL default '0', KEY i1 (key1));
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES (0),(0),(0),(0),(0),(1),(1);
CREATE TABLE t2 (keya int(11) NOT NULL default '0', KEY j1 (keya));
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t2 VALUES (0),(0),(1),(1),(2),(2);
explain select * from t1, t2 where (t1.key1 <t2.keya + 1) and t2.keya=3;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	ref	j1	j1	4	const	1	100.00	Using index
1	SIMPLE	t1	NULL	index	i1	i1	4	NULL	7	100.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`key1` AS `key1`,`test`.`t2`.`keya` AS `keya` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`keya` = 3) and (`test`.`t1`.`key1` < <cache>((3 + 1))))
explain select * from t1 force index(i1), t2 force index(j1) where 
(t1.key1 <t2.keya + 1) and t2.keya=3;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	ref	j1	j1	4	const	1	100.00	Using index
1	SIMPLE	t1	NULL	index	i1	i1	4	NULL	7	100.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`key1` AS `key1`,`test`.`t2`.`keya` AS `keya` from `test`.`t1` FORCE INDEX (`i1`) join `test`.`t2` FORCE INDEX (`j1`) where ((`test`.`t2`.`keya` = 3) and (`test`.`t1`.`key1` < <cache>((3 + 1))))
DROP TABLE t1,t2;
CREATE TABLE t1 (
a int(11) default NULL,
b int(11) default NULL,
KEY a (a),
KEY b (b)
) ENGINE=MyISAM;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES
(1,1),(2,1),(3,1),(4,1),(5,1),(6,1),(7,1),(8,1),(9,1),(10,2),(10,2),
(13,2),(14,2),(15,2),(16,2),(17,3),(17,3),(16,3),(17,3),(19,3),(20,3),
(21,4),(22,5),(23,5),(24,5),(25,5),(26,5),(30,5),(31,5),(32,5),(33,5),
(33,5),(33,5),(33,5),(33,5),(34,5),(35,5);
EXPLAIN SELECT * FROM t1 WHERE a IN(1,2) AND b=5;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a,b	a	5	NULL	2	40.54	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 5) and (`test`.`t1`.`a` in (1,2)))
SELECT * FROM t1 WHERE a IN(1,2) AND b=5;
a	b
DROP TABLE t1;
CREATE TABLE t1 (a int, b int, c int, INDEX (c,a,b));
INSERT INTO t1 VALUES (1,0,0),(1,0,0),(1,0,0);
INSERT INTO t1 VALUES (0,1,0),(0,1,0),(0,1,0);
SELECT COUNT(*) FROM t1 WHERE (c=0 and a=1) or (c=0 and b=1);
COUNT(*)
6
SELECT COUNT(*) FROM t1 WHERE (c=0 and b=1) or (c=0 and a=1);
COUNT(*)
6
DROP TABLE t1;
CREATE TABLE t1 ( a int not null, b int not null, INDEX ab(a,b) );
INSERT INTO t1 VALUES (47,1), (70,1), (15,1), (15, 4);
SELECT * FROM t1
WHERE
(
( b =1 AND a BETWEEN 14 AND 21 ) OR
( b =2 AND a BETWEEN 16 AND 18 ) OR
( b =3 AND a BETWEEN 15 AND 19 ) OR
(a BETWEEN 19 AND 47)
);
a	b
15	1
47	1
DROP TABLE t1;
CREATE TABLE t1 (
id int( 11 ) unsigned NOT NULL AUTO_INCREMENT ,
line int( 5 ) unsigned NOT NULL default '0',
columnid int( 3 ) unsigned NOT NULL default '0',
owner int( 3 ) unsigned NOT NULL default '0',
ordinal int( 3 ) unsigned NOT NULL default '0',
showid smallint( 6 ) unsigned NOT NULL default '1',
tableid int( 1 ) unsigned NOT NULL default '1',
content int( 5 ) unsigned NOT NULL default '188',
PRIMARY KEY ( owner, id ) ,
KEY menu( owner, showid, columnid ) ,
KEY `COLUMN` ( owner, columnid, line ) ,
KEY `LINES` ( owner, tableid, content, id ) ,
KEY recount( owner, line ) 
) ENGINE = MYISAM;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT into t1 (owner,id,columnid,line) values (11,15,15,1),(11,13,13,5);
SELECT id, columnid, tableid, content, showid, line, ordinal FROM t1 WHERE owner=11 AND ((columnid IN ( 15, 13, 14 ) AND line IN ( 1, 2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 31 )) OR (columnid IN ( 13, 14 ) AND line IN ( 15 ))) LIMIT 0 , 30;
id	columnid	tableid	content	showid	line	ordinal
13	13	1	188	1	5	0
15	15	1	188	1	1	0
drop table t1;
create  table t1 (id int(10) primary key);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9);
select id from t1 where id in (2,5,9) ;
id
2
5
9
select id from t1 where id=2 or id=5 or id=9 ;
id
2
5
9
drop table t1;
create table t1 ( id1 int not null, id2 int not null, idnull int null, c char(20), primary key (id1,id2));
insert into t1 values (0,1,NULL,"aaa"), (1,1,NULL,"aaa"), (2,1,NULL,"aaa"),
(3,1,NULL,"aaa"), (4,1,NULL,"aaa"), (5,1,NULL,"aaa"),
(6,1,NULL,"aaa"), (7,1,NULL,"aaa"), (8,1,NULL,"aaa"),
(9,1,NULL,"aaa"), (10,1,NULL,"aaa"), (11,1,NULL,"aaa"),
(12,1,NULL,"aaa"), (13,1,NULL,"aaa"), (14,1,NULL,"aaa"),
(15,1,NULL,"aaa"), (16,1,NULL,"aaa"), (17,1,NULL,"aaa"),
(18,1,NULL,"aaa"), (19,1,NULL,"aaa"), (20,1,NULL,"aaa");
select a.id1, b.idnull from t1 as a, t1 as b where a.id2=1 and a.id1=1 and b.id1=a.idnull order by b.id2 desc limit 1;
id1	idnull
drop table t1;
create table t1 (
id int not null auto_increment,
name char(1) not null,
uid int not null,
primary key (id),
index uid_index (uid));
create table t2 (
id int not null auto_increment,
name char(1) not null,
uid int not null,
primary key (id),
index uid_index (uid));
insert into t1(id, uid, name) values(1, 0, ' ');
insert into t1(uid, name) values(0, ' ');
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
insert into t2(uid, name) select uid, name from t1;
insert into t2(uid, name) select uid, name from t1;
insert into t2(uid, name) select uid, name from t1;
insert into t2(uid, name) select uid, name from t1;
insert into t1(uid, name) select uid, name from t2;
delete from t2;
insert into t2(uid, name) values 
(1, CHAR(64+1)),
(2, CHAR(64+2)),
(3, CHAR(64+3)),
(4, CHAR(64+4)),
(5, CHAR(64+5)),
(6, CHAR(64+6)),
(7, CHAR(64+7)),
(8, CHAR(64+8)),
(9, CHAR(64+9)),
(10, CHAR(64+10)),
(11, CHAR(64+11)),
(12, CHAR(64+12)),
(13, CHAR(64+13)),
(14, CHAR(64+14)),
(15, CHAR(64+15)),
(16, CHAR(64+16)),
(17, CHAR(64+17)),
(18, CHAR(64+18)),
(19, CHAR(64+19)),
(20, CHAR(64+20)),
(21, CHAR(64+21)),
(22, CHAR(64+22)),
(23, CHAR(64+23)),
(24, CHAR(64+24)),
(25, CHAR(64+25)),
(26, CHAR(64+26));
insert into t1(uid, name) select uid, name from t2 order by uid;
delete from t2;
insert into t2(id, uid, name) select id, uid, name from t1;
select count(*) from t1;
count(*)
1026
select count(*) from t2;
count(*)
1026
analyze table t1,t2;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
test.t2	analyze	status	Table is already up to date
explain select * from t1, t2  where t1.uid=t2.uid AND t1.uid > 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	uid_index	uid_index	4	NULL	112	100.00	Using where; Using MRR
1	SIMPLE	t2	NULL	ref	uid_index	uid_index	4	test.t1.uid	38	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`name` AS `name`,`test`.`t1`.`uid` AS `uid`,`test`.`t2`.`id` AS `id`,`test`.`t2`.`name` AS `name`,`test`.`t2`.`uid` AS `uid` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`uid` = `test`.`t1`.`uid`) and (`test`.`t1`.`uid` > 0))
explain select * from t1, t2  where t1.uid=t2.uid AND t2.uid > 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	uid_index	uid_index	4	NULL	112	100.00	Using where; Using MRR
1	SIMPLE	t2	NULL	ref	uid_index	uid_index	4	test.t1.uid	38	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`name` AS `name`,`test`.`t1`.`uid` AS `uid`,`test`.`t2`.`id` AS `id`,`test`.`t2`.`name` AS `name`,`test`.`t2`.`uid` AS `uid` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`uid` = `test`.`t1`.`uid`) and (`test`.`t1`.`uid` > 0))
explain select * from t1, t2  where t1.uid=t2.uid AND t1.uid != 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	uid_index	uid_index	4	NULL	113	100.00	Using where; Using MRR
1	SIMPLE	t2	NULL	ref	uid_index	uid_index	4	test.t1.uid	38	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`name` AS `name`,`test`.`t1`.`uid` AS `uid`,`test`.`t2`.`id` AS `id`,`test`.`t2`.`name` AS `name`,`test`.`t2`.`uid` AS `uid` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`uid` = `test`.`t1`.`uid`) and (`test`.`t1`.`uid` <> 0))
explain select * from t1, t2  where t1.uid=t2.uid AND t2.uid != 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	uid_index	uid_index	4	NULL	113	100.00	Using where; Using MRR
1	SIMPLE	t2	NULL	ref	uid_index	uid_index	4	test.t1.uid	38	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`name` AS `name`,`test`.`t1`.`uid` AS `uid`,`test`.`t2`.`id` AS `id`,`test`.`t2`.`name` AS `name`,`test`.`t2`.`uid` AS `uid` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`uid` = `test`.`t1`.`uid`) and (`test`.`t1`.`uid` <> 0))
select * from t1, t2  where t1.uid=t2.uid AND t1.uid > 0;
id	name	uid	id	name	uid
1001	A	1	1001	A	1
1002	B	2	1002	B	2
1003	C	3	1003	C	3
1004	D	4	1004	D	4
1005	E	5	1005	E	5
1006	F	6	1006	F	6
1007	G	7	1007	G	7
1008	H	8	1008	H	8
1009	I	9	1009	I	9
1010	J	10	1010	J	10
1011	K	11	1011	K	11
1012	L	12	1012	L	12
1013	M	13	1013	M	13
1014	N	14	1014	N	14
1015	O	15	1015	O	15
1016	P	16	1016	P	16
1017	Q	17	1017	Q	17
1018	R	18	1018	R	18
1019	S	19	1019	S	19
1020	T	20	1020	T	20
1021	U	21	1021	U	21
1022	V	22	1022	V	22
1023	W	23	1023	W	23
1024	X	24	1024	X	24
1025	Y	25	1025	Y	25
1026	Z	26	1026	Z	26
select * from t1, t2  where t1.uid=t2.uid AND t1.uid != 0;
id	name	uid	id	name	uid
1001	A	1	1001	A	1
1002	B	2	1002	B	2
1003	C	3	1003	C	3
1004	D	4	1004	D	4
1005	E	5	1005	E	5
1006	F	6	1006	F	6
1007	G	7	1007	G	7
1008	H	8	1008	H	8
1009	I	9	1009	I	9
1010	J	10	1010	J	10
1011	K	11	1011	K	11
1012	L	12	1012	L	12
1013	M	13	1013	M	13
1014	N	14	1014	N	14
1015	O	15	1015	O	15
1016	P	16	1016	P	16
1017	Q	17	1017	Q	17
1018	R	18	1018	R	18
1019	S	19	1019	S	19
1020	T	20	1020	T	20
1021	U	21	1021	U	21
1022	V	22	1022	V	22
1023	W	23	1023	W	23
1024	X	24	1024	X	24
1025	Y	25	1025	Y	25
1026	Z	26	1026	Z	26
drop table t1,t2;
create table t1 (x bigint unsigned not null);
insert into t1(x) values (0xfffffffffffffff0);
insert into t1(x) values (0xfffffffffffffff1);
select * from t1;
x
18446744073709551600
18446744073709551601
select count(*) from t1 where x>0;
count(*)
2
select count(*) from t1 where x=0;
count(*)
0
select count(*) from t1 where x<0;
count(*)
0
select count(*) from t1 where x < -16;
count(*)
0
select count(*) from t1 where x = -16;
count(*)
0
select count(*) from t1 where x > -16;
count(*)
2
select count(*) from t1 where x = 18446744073709551601;
count(*)
1
create table t2 (x bigint not null);
insert into t2(x) values (-16);
insert into t2(x) values (-15);
select * from t2;
x
-16
-15
select count(*) from t2 where x>0;
count(*)
0
select count(*) from t2 where x=0;
count(*)
0
select count(*) from t2 where x<0;
count(*)
2
select count(*) from t2 where x < -16;
count(*)
0
select count(*) from t2 where x = -16;
count(*)
1
select count(*) from t2 where x > -16;
count(*)
1
select count(*) from t2 where x = 18446744073709551601;
count(*)
0
drop table t1,t2;
create table t1 (x bigint unsigned not null primary key) engine=innodb;
insert into t1(x) values (0xfffffffffffffff0);
insert into t1(x) values (0xfffffffffffffff1);
select * from t1;
x
18446744073709551600
18446744073709551601
select count(*) from t1 where x>0;
count(*)
2
select count(*) from t1 where x=0;
count(*)
0
select count(*) from t1 where x<0;
count(*)
0
select count(*) from t1 where x < -16;
count(*)
0
select count(*) from t1 where x = -16;
count(*)
0
select count(*) from t1 where x > -16;
count(*)
2
select count(*) from t1 where x = 18446744073709551601;
count(*)
1
drop table t1;
create table t1 (a bigint unsigned);
create index t1i on t1(a);
insert into t1 select 18446744073709551615;
insert into t1 select 18446744073709551614;
explain select * from t1 where a <> -1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	t1i	t1i	9	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where (`test`.`t1`.`a` is not null)
select * from t1 where a <> -1;
a
18446744073709551614
18446744073709551615
explain select * from t1 where a > -1 or a < -1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	t1i	t1i	9	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where (`test`.`t1`.`a` is not null)
select * from t1 where a > -1 or a < -1;
a
18446744073709551614
18446744073709551615
explain select * from t1 where a > -1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	t1i	t1i	9	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where (`test`.`t1`.`a` is not null)
select * from t1 where a > -1;
a
18446744073709551614
18446744073709551615
explain select * from t1 where a < -1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible WHERE
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where false
select * from t1 where a < -1;
a
drop table t1;
set names latin1;
create table t1 (a char(10), b text, key (a)) character set latin1;
INSERT INTO t1 (a) VALUES
('111'),('222'),('222'),('222'),('222'),('444'),('aaa'),('AAA'),('bbb');
explain select * from t1 where a='aaa';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	a	a	11	const	2	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` = 'aaa')
explain select * from t1 where a=binary 'aaa';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	11	NULL	2	100.00	Using where; Using MRR
Warnings:
Warning	1739	Cannot use ref access on index 'a' due to type or collation conversion on field 'a'
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` = <cache>(cast('aaa' as char charset binary)))
explain select * from t1 where a='aaa' collate latin1_bin;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	11	NULL	2	100.00	Using where; Using MRR
Warnings:
Warning	1739	Cannot use ref access on index 'a' due to type or collation conversion on field 'a'
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` = <cache>(('aaa' collate latin1_bin)))
explain select * from t1 where a='aaa' collate latin1_german1_ci;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	a	NULL	NULL	NULL	9	11.11	Using where
Warnings:
Warning	1739	Cannot use ref access on index 'a' due to type or collation conversion on field 'a'
Warning	1739	Cannot use range access on index 'a' due to type or collation conversion on field 'a'
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` = <cache>(('aaa' collate latin1_german1_ci)))
drop table t1;
CREATE TABLE t1 (
`CLIENT` char(3) character set latin1 collate latin1_bin NOT NULL default '000',
`ARG1` char(3) character set latin1 collate latin1_bin NOT NULL default '',
`ARG2` char(3) character set latin1 collate latin1_bin NOT NULL default '',
`FUNCTION` varchar(10) character set latin1 collate latin1_bin NOT NULL default '',
`FUNCTINT` int(11) NOT NULL default '0',
KEY `VERI_CLNT~2` (`ARG1`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
INSERT INTO t1 VALUES ('000',' 0',' 0','Text 001',0), ('000',' 0',' 1','Text 002',0),
('000',' 1',' 2','Text 003',0), ('000',' 2',' 3','Text 004',0),
('001',' 3',' 0','Text 017',0);
SELECT count(*) FROM t1 WHERE CLIENT='000' AND (ARG1 != ' 1' OR ARG1 != ' 2');
count(*)
4
SELECT count(*) FROM t1 WHERE CLIENT='000' AND (ARG1 != ' 2' OR ARG1 != ' 1');
count(*)
4
drop table t1;
create table t1 (a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
CREATE TABLE t2 (
pk1 int(11) NOT NULL,
pk2 int(11) NOT NULL,
pk3 int(11) NOT NULL,
pk4 int(11) NOT NULL,
filler char(82),
PRIMARY KEY (pk1,pk2,pk3,pk4)
) DEFAULT CHARSET=latin1;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
insert into t2 select 1, A.a+10*B.a, 432, 44, 'fillerZ' from t1 A, t1 B;
INSERT INTO t2 VALUES (2621, 2635, 0, 0,'filler'), (2621, 2635, 1, 0,'filler'),
(2621, 2635, 10, 0,'filler'), (2621, 2635, 11, 0,'filler'),
(2621, 2635, 14, 0,'filler'), (2621, 2635, 1000015, 0,'filler');
SELECT * FROM t2
WHERE ((((pk4 =0) AND (pk1 =2621) AND (pk2 =2635)))
OR ((pk4 =1) AND (((pk1 IN ( 7, 2, 1 ))) OR (pk1 =522)) AND ((pk2 IN ( 0, 2635))))
) AND (pk3 >=1000000);
pk1	pk2	pk3	pk4	filler
2621	2635	1000015	0	filler
drop table t1, t2;
create table t1(a char(2), key(a(1))) charset utf8mb4;
insert into t1 values ('x'), ('xx');
explain select a from t1 where a > 'x';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	2	100.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where (`test`.`t1`.`a` > 'x')
select a from t1 where a > 'x';
a
xx
drop table t1;
CREATE TABLE t1 (
OXID varchar(32) COLLATE latin1_german2_ci NOT NULL DEFAULT '',
OXPARENTID varchar(32) COLLATE latin1_german2_ci NOT NULL DEFAULT 'oxrootid',
OXLEFT int NOT NULL DEFAULT '0',
OXRIGHT int NOT NULL DEFAULT '0',
OXROOTID varchar(32) COLLATE latin1_german2_ci NOT NULL DEFAULT '',
PRIMARY KEY  (OXID),
KEY OXNID (OXID),
KEY OXLEFT (OXLEFT),
KEY OXRIGHT (OXRIGHT),
KEY OXROOTID (OXROOTID)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_german2_ci;
INSERT INTO t1 VALUES
('d8c4177d09f8b11f5.52725521','oxrootid',1,40,'d8c4177d09f8b11f5.52725521'),
('d8c4177d151affab2.81582770','d8c4177d09f8b11f5.52725521',2,3,
'd8c4177d09f8b11f5.52725521'),
('d8c4177d206a333d2.74422679','d8c4177d09f8b11f5.52725521',4,5,
'd8c4177d09f8b11f5.52725521'),
('d8c4177d225791924.30714720','d8c4177d09f8b11f5.52725521',6,7,
'd8c4177d09f8b11f5.52725521'),
('d8c4177d2380fc201.39666693','d8c4177d09f8b11f5.52725521',8,9,
'd8c4177d09f8b11f5.52725521'),
('d8c4177d24ccef970.14957924','d8c4177d09f8b11f5.52725521',10,11,
'd8c4177d09f8b11f5.52725521');
EXPLAIN
SELECT s.oxid FROM t1 v, t1 s 
WHERE s.oxrootid = 'd8c4177d09f8b11f5.52725521' AND
v.oxrootid ='d8c4177d09f8b11f5.52725521' AND
s.oxleft > v.oxleft AND s.oxleft < v.oxright;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	v	NULL	ref	OXLEFT,OXRIGHT,OXROOTID	OXROOTID	34	const	5	100.00	NULL
1	SIMPLE	s	NULL	ref	OXLEFT,OXROOTID	OXROOTID	34	const	5	16.67	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`s`.`OXID` AS `oxid` from `test`.`t1` `v` join `test`.`t1` `s` where ((`test`.`s`.`OXROOTID` = 'd8c4177d09f8b11f5.52725521') and (`test`.`v`.`OXROOTID` = 'd8c4177d09f8b11f5.52725521') and (`test`.`s`.`OXLEFT` > `test`.`v`.`OXLEFT`) and (`test`.`s`.`OXLEFT` < `test`.`v`.`OXRIGHT`))
SELECT s.oxid FROM t1 v, t1 s 
WHERE s.oxrootid = 'd8c4177d09f8b11f5.52725521' AND
v.oxrootid ='d8c4177d09f8b11f5.52725521' AND
s.oxleft > v.oxleft AND s.oxleft < v.oxright;
oxid
d8c4177d151affab2.81582770
d8c4177d206a333d2.74422679
d8c4177d225791924.30714720
d8c4177d2380fc201.39666693
d8c4177d24ccef970.14957924
DROP TABLE t1;
create table t1 (
c1  char(10), c2  char(10), c3  char(10), c4  char(10),
c5  char(10), c6  char(10), c7  char(10), c8  char(10),
c9  char(10), c10 char(10), c11 char(10), c12 char(10),
c13 char(10), c14 char(10), c15 char(10), c16 char(10),
index(c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12,c13,c14,c15,c16)
);
insert into t1 (c1) values ('1'),('1'),('1'),('1');
select * from t1 where
c1 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4",
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c2 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c3 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c4 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5", 
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c5 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4",
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c6 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4",
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c7 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c8 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c9 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC")
and c10 in ("abcdefgh", "123456789", "qwertyuio", "asddfgh", 
"abcdefg1", "123456781", "qwertyui1", "asddfg1", 
"abcdefg2", "123456782", "qwertyui2", "asddfg2", 
"abcdefg3", "123456783", "qwertyui3", "asddfg3", 
"abcdefg4", "123456784", "qwertyui4", "asddfg4", 
"abcdefg5", "123456785", "qwertyui5", "asddfg5",
"abcdefg6", "123456786", "qwertyui6", "asddfg6",
"abcdefg7", "123456787", "qwertyui7", "asddfg7",
"abcdefg8", "123456788", "qwertyui8", "asddfg8",
"abcdefg9", "123456789", "qwertyui9", "asddfg9",
"abcdefgA", "12345678A", "qwertyuiA", "asddfgA",
"abcdefgB", "12345678B", "qwertyuiB", "asddfgB",
"abcdefgC", "12345678C", "qwertyuiC", "asddfgC");
c1	c2	c3	c4	c5	c6	c7	c8	c9	c10	c11	c12	c13	c14	c15	c16
Warnings:
Warning	3170	Memory capacity of 8388608 bytes for 'range_optimizer_max_mem_size' exceeded. Range optimization was not done for this query.
drop table t1;
End of 4.1 tests
CREATE TABLE t1 (
id int(11) NOT NULL auto_increment,
status varchar(20),
PRIMARY KEY  (id),
KEY (status)
) CHARSET utf8mb4;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES
(1,'B'), (2,'B'), (3,'B'), (4,'B'), (5,'B'), (6,'B'),
(7,'B'), (8,'B'), (9,'B'), (10,'B'), (11,'B'), (12,'B'),
(13,'B'), (14,'B'), (15,'B'), (16,'B'), (17,'B'), (18,'B'),
(19,'B'), (20,'B'), (21,'B'), (22,'B'), (23,'B'), (24,'B'), 
(25,'A'), (26,'A'), (27,'A'), (28,'A'), (29,'A'), (30,'A'),
(31,'A'), (32,'A'), (33,'A'), (34,'A'), (35,'A'), (36,'A'),
(37,'A'), (38,'A'), (39,'A'), (40,'A'), (41,'A'), (42,'A'),
(43,'A'), (44,'A'), (45,'A'), (46,'A'), (47,'A'), (48,'A'),
(49,'A'), (50,'A'), (51,'A'), (52,'A'), (53,'C'), (54,'C'),
(55,'C'), (56,'C'), (57,'C'), (58,'C'), (59,'C'), (60,'C');
EXPLAIN SELECT * FROM t1 WHERE status <> 'A' AND status <> 'B';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	11	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`status` AS `status` from `test`.`t1` where ((`test`.`t1`.`status` <> 'A') and (`test`.`t1`.`status` <> 'B'))
EXPLAIN SELECT * FROM t1 WHERE status NOT IN ('A','B');
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	11	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`status` AS `status` from `test`.`t1` where (`test`.`t1`.`status` not in ('A','B'))
SELECT * FROM t1 WHERE status <> 'A' AND status <> 'B';
id	status
53	C
54	C
55	C
56	C
57	C
58	C
59	C
60	C
SELECT * FROM t1 WHERE status NOT IN ('A','B');
id	status
53	C
54	C
55	C
56	C
57	C
58	C
59	C
60	C
EXPLAIN SELECT status FROM t1 WHERE status <> 'A' AND status <> 'B';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	11	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`status` AS `status` from `test`.`t1` where ((`test`.`t1`.`status` <> 'A') and (`test`.`t1`.`status` <> 'B'))
EXPLAIN SELECT status FROM t1 WHERE status NOT IN ('A','B');
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	11	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`status` AS `status` from `test`.`t1` where (`test`.`t1`.`status` not in ('A','B'))
EXPLAIN SELECT * FROM t1 WHERE status NOT BETWEEN 'A' AND 'B';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	10	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`status` AS `status` from `test`.`t1` where (`test`.`t1`.`status` not between 'A' and 'B')
EXPLAIN SELECT * FROM t1 WHERE status < 'A' OR status > 'B';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	status	status	83	NULL	10	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`status` AS `status` from `test`.`t1` where ((`test`.`t1`.`status` < 'A') or (`test`.`t1`.`status` > 'B'))
SELECT * FROM t1 WHERE status NOT BETWEEN 'A' AND 'B';
id	status
53	C
54	C
55	C
56	C
57	C
58	C
59	C
60	C
SELECT * FROM t1 WHERE status < 'A' OR status > 'B';
id	status
53	C
54	C
55	C
56	C
57	C
58	C
59	C
60	C
DROP TABLE t1;
CREATE TABLE  t1 (a int, b int, primary key(a,b));
INSERT INTO  t1 VALUES
(1,1),(1,2),(1,3),(2,1),(2,2),(2,3),(3,1),(3,2),(3,3),(4,1),(4,2),(4,3);
CREATE VIEW v1 as SELECT a,b FROM t1 WHERE b=3;
EXPLAIN SELECT a,b FROM t1 WHERE a < 2 and b=3;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	4	10.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 3) and (`test`.`t1`.`a` < 2))
EXPLAIN SELECT a,b FROM v1 WHERE a < 2 and b=3;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	4	10.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 3) and (`test`.`t1`.`a` < 2))
EXPLAIN SELECT a,b FROM t1 WHERE a < 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	4	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` < 2)
EXPLAIN SELECT a,b FROM v1 WHERE a < 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	4	10.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 3) and (`test`.`t1`.`a` < 2))
SELECT a,b FROM t1 WHERE a < 2 and b=3;
a	b
1	3
SELECT a,b FROM v1 WHERE a < 2 and b=3;
a	b
1	3
DROP VIEW v1;
DROP TABLE t1;
CREATE TABLE t1 (name varchar(15) NOT NULL, KEY idx(name));
INSERT INTO t1 VALUES ('Betty'), ('Anna');
SELECT * FROM t1;
name
Anna
Betty
DELETE FROM t1 WHERE name NOT LIKE 'A%a';
SELECT * FROM t1;
name
Anna
DROP TABLE t1;
CREATE TABLE t1 (a int, KEY idx(a));
INSERT INTO t1 VALUES (NULL), (1), (2), (3);
SELECT * FROM t1;
a
NULL
1
2
3
DELETE FROM t1 WHERE NOT(a <=> 2);
SELECT * FROM t1;
a
2
DROP TABLE t1;
create table t1 (a int, b int, primary key(a,b));
create view v1 as select a, b from t1;
INSERT INTO `t1` VALUES
(0,0),(1,0),(2,0),(3,0),(4,0),(5,1),(6,1),(7,1),(8,1),(9,1),(10,2),(11,2),(12,2)
,(13,2),(14,2),(15,3),(16,3),(17,3),(18,3),(19,3);
explain select * from t1 where a in (3,4)  and b in (1,2,3);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	8	NULL	#	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` in (3,4)) and (`test`.`t1`.`b` in (1,2,3)))
explain select * from v1 where a in (3,4)  and b in (1,2,3);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	8	NULL	#	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` in (3,4)) and (`test`.`t1`.`b` in (1,2,3)))
explain select * from t1 where a between 3 and 4 and b between 1 and 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	8	NULL	#	11.11	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` between 3 and 4) and (`test`.`t1`.`b` between 1 and 2))
explain select * from v1 where a between 3 and 4 and b between 1 and 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	8	NULL	#	11.11	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` between 3 and 4) and (`test`.`t1`.`b` between 1 and 2))
drop view v1;
drop table t1;
create table t3 (a int);
insert into t3 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1 (a varchar(10), filler char(200), key(a)) charset=binary;
insert into t1 values ('a','');
insert into t1 values ('a ','');
insert into t1 values ('a  ', '');
insert into t1 select concat('a', 1000 + A.a + 10 * (B.a + 10 * C.a)), ''
  from t3 A, t3 B, t3 C;
create table t2 (a varchar(10), filler char(200), key(a)) charset utf8mb4;
insert into t2 select * from t1;
explain select * from t1 where a between 'a' and 'a ';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	13	NULL	#	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`filler` AS `filler` from `test`.`t1` where (`test`.`t1`.`a` between 'a' and 'a ')
explain select * from t1 where a = 'a' or a='a ';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	13	NULL	#	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`filler` AS `filler` from `test`.`t1` where ((`test`.`t1`.`a` = 'a') or (`test`.`t1`.`a` = 'a '))
explain select * from t2 where a between 'a' and 'A';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	ref	a	a	43	const	#	100.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`filler` AS `filler` from `test`.`t2` where (`test`.`t2`.`a` between 'a' and 'A')
explain select * from t2 where a = 'a' or a='A';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	ref	a	a	43	const	#	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`filler` AS `filler` from `test`.`t2` where ((`test`.`t2`.`a` = 'a') or (`test`.`t2`.`a` = 'A'))
update t1 set a='b' where a<>'a';
explain select * from t1 where a not between 'b' and 'b';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	13	NULL	#	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`filler` AS `filler` from `test`.`t1` where (`test`.`t1`.`a` not between 'b' and 'b')
select a, hex(filler) from t1 where a not between 'b' and 'b';
a	hex(filler)
a	0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
drop table t1,t2,t3;
create table t1 (a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t2 (a int, key(a));
insert into t2 select 2*(A.a + 10*(B.a + 10*C.a)) from t1 A, t1 B, t1 C;
set @a="select * from t2 force index (a) where a NOT IN(0";
select count(*) from (select @a:=concat(@a, ',', a) from t2 ) Z;
count(*)
1000
Warnings:
Warning	1287	Setting user variables within expressions is deprecated and will be removed in a future release. Consider alternatives: 'SET variable=expression, ...', or 'SELECT expression(s) INTO variables(s)'.
set @a=concat(@a, ')');
insert into t2 values (11),(13),(15);
set @b= concat("explain ", @a);
prepare stmt1 from @b;
execute stmt1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	index	a	a	5	NULL	1003	50.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a` from `test`.`t2` FORCE INDEX (`a`) where (`test`.`t2`.`a` not in (0,0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100,102,104,106,108,110,112,114,116,118,120,122,124,126,128,130,132,134,136,138,140,142,144,146,148,150,152,154,156,158,160,162,164,166,168,170,172,174,176,178,180,182,184,186,188,190,192,194,196,198,200,202,204,206,208,210,212,214,216,218,220,222,224,226,228,230,232,234,236,238,240,242,244,246,248,250,252,254,256,258,260,262,264,266,268,270,272,274,276,278,280,282,284,286,288,290,292,294,296,298,300,302,304,306,308,310,312,314,316,318,320,322,324,326,328,330,332,334,336,338,340,342,344,346,348,350,352,354,356,358,360,362,364,366,368,370,372,374,376,378,380,382,384,386,388,390,392,394,396,398,400,402,404,406,408,410,412,414,416,418,420,422,424,426,428,430,432,434,436,438,440,442,444,446,448,450,452,454,456,458,460,462,464,466,468,470,472,474,476,478,480,482,484,486,488,490,492,494,496,498,500,502,504,506,508,510,512,514,516,518,520,522,524,526,528,530,532,534,536,538,540,542,544,546,548,550,552,554,556,558,560,562,564,566,568,570,572,574,576,578,580,582,584,586,588,590,592,594,596,598,600,602,604,606,608,610,612,614,616,618,620,622,624,626,628,630,632,634,636,638,640,642,644,646,648,650,652,654,656,658,660,662,664,666,668,670,672,674,676,678,680,682,684,686,688,690,692,694,696,698,700,702,704,706,708,710,712,714,716,718,720,722,724,726,728,730,732,734,736,738,740,742,744,746,748,750,752,754,756,758,760,762,764,766,768,770,772,774,776,778,780,782,784,786,788,790,792,794,796,798,800,802,804,806,808,810,812,814,816,818,820,822,824,826,828,830,832,834,836,838,840,842,844,846,848,850,852,854,856,858,860,862,864,866,868,870,872,874,876,878,880,882,884,886,888,890,892,894,896,898,900,902,904,906,908,910,912,914,916,918,920,922,924,926,928,930,932,934,936,938,940,942,944,946,948,950,952,954,956,958,960,962,964,966,968,970,972,974,976,978,980,982,984,986,988,990,992,994,996,998,1000,1002,1004,1006,1008,1010,1012,1014,1016,1018,1020,1022,1024,1026,1028,1030,1032,1034,1036,1038,1040,1042,1044,1046,1048,1050,1052,1054,1056,1058,1060,1062,1064,1066,1068,1070,1072,1074,1076,1078,1080,1082,1084,1086,1088,1090,1092,1094,1096,1098,1100,1102,1104,1106,1108,1110,1112,1114,1116,1118,1120,1122,1124,1126,1128,1130,1132,1134,1136,1138,1140,1142,1144,1146,1148,1150,1152,1154,1156,1158,1160,1162,1164,1166,1168,1170,1172,1174,1176,1178,1180,1182,1184,1186,1188,1190,1192,1194,1196,1198,1200,1202,1204,1206,1208,1210,1212,1214,1216,1218,1220,1222,1224,1226,1228,1230,1232,1234,1236,1238,1240,1242,1244,1246,1248,1250,1252,1254,1256,1258,1260,1262,1264,1266,1268,1270,1272,1274,1276,1278,1280,1282,1284,1286,1288,1290,1292,1294,1296,1298,1300,1302,1304,1306,1308,1310,1312,1314,1316,1318,1320,1322,1324,1326,1328,1330,1332,1334,1336,1338,1340,1342,1344,1346,1348,1350,1352,1354,1356,1358,1360,1362,1364,1366,1368,1370,1372,1374,1376,1378,1380,1382,1384,1386,1388,1390,1392,1394,1396,1398,1400,1402,1404,1406,1408,1410,1412,1414,1416,1418,1420,1422,1424,1426,1428,1430,1432,1434,1436,1438,1440,1442,1444,1446,1448,1450,1452,1454,1456,1458,1460,1462,1464,1466,1468,1470,1472,1474,1476,1478,1480,1482,1484,1486,1488,1490,1492,1494,1496,1498,1500,1502,1504,1506,1508,1510,1512,1514,1516,1518,1520,1522,1524,1526,1528,1530,1532,1534,1536,1538,1540,1542,1544,1546,1548,1550,1552,1554,1556,1558,1560,1562,1564,1566,1568,1570,1572,1574,1576,1578,1580,1582,1584,1586,1588,1590,1592,1594,1596,1598,1600,1602,1604,1606,1608,1610,1612,1614,1616,1618,1620,1622,1624,1626,1628,1630,1632,1634,1636,1638,1640,1642,1644,1646,1648,1650,1652,1654,1656,1658,1660,1662,1664,1666,1668,1670,1672,1674,1676,1678,1680,1682,1684,1686,1688,1690,1692,1694,1696,1698,1700,1702,1704,1706,1708,1710,1712,1714,1716,1718,1720,1722,1724,1726,1728,1730,1732,1734,1736,1738,1740,1742,1744,1746,1748,1750,1752,1754,1756,1758,1760,1762,1764,1766,1768,1770,1772,1774,1776,1778,1780,1782,1784,1786,1788,1790,1792,1794,1796,1798,1800,1802,1804,1806,1808,1810,1812,1814,1816,1818,1820,1822,1824,1826,1828,1830,1832,1834,1836,1838,1840,1842,1844,1846,1848,1850,1852,1854,1856,1858,1860,1862,1864,1866,1868,1870,1872,1874,1876,1878,1880,1882,1884,1886,1888,1890,1892,1894,1896,1898,1900,1902,1904,1906,1908,1910,1912,1914,1916,1918,1920,1922,1924,1926,1928,1930,1932,1934,1936,1938,1940,1942,1944,1946,1948,1950,1952,1954,1956,1958,1960,1962,1964,1966,1968,1970,1972,1974,1976,1978,1980,1982,1984,1986,1988,1990,1992,1994,1996,1998))
prepare stmt1 from @a;
execute stmt1;
a
11
13
15
drop table t1, t2;
CREATE TABLE t1 (
id int NOT NULL DEFAULT '0',
b int NOT NULL DEFAULT '0',
c int NOT NULL DEFAULT '0', 
INDEX idx1(b,c), INDEX idx2(c));
INSERT INTO t1(id) VALUES (1), (2), (3), (4), (5), (6), (7), (8);
INSERT INTO t1(b,c) VALUES (3,4), (3,4);
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
SELECT * FROM t1 WHERE b<=3 AND 3<=c;
id	b	c
0	3	4
0	3	4
SELECT * FROM t1 WHERE 3 BETWEEN b AND c;
id	b	c
0	3	4
0	3	4
EXPLAIN  SELECT * FROM t1 WHERE b<=3 AND 3<=c;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	idx1,idx2	idx2	4	NULL	3	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`b` AS `b`,`test`.`t1`.`c` AS `c` from `test`.`t1` where ((`test`.`t1`.`b` <= 3) and (3 <= `test`.`t1`.`c`))
EXPLAIN  SELECT * FROM t1 WHERE 3 BETWEEN b AND c;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	idx1,idx2	idx2	4	NULL	3	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`b` AS `b`,`test`.`t1`.`c` AS `c` from `test`.`t1` where (3 between `test`.`t1`.`b` and `test`.`t1`.`c`)
SELECT * FROM t1 WHERE 0 < b OR 0 > c;
id	b	c
0	3	4
0	3	4
SELECT * FROM t1 WHERE 0 NOT BETWEEN b AND c;
id	b	c
0	3	4
0	3	4
EXPLAIN SELECT * FROM t1 WHERE 0 < b OR 0 > c;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index_merge	idx1,idx2	idx1,idx2	4,4	NULL	4	100.00	Using sort_union(idx1,idx2); Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`b` AS `b`,`test`.`t1`.`c` AS `c` from `test`.`t1` where ((0 < `test`.`t1`.`b`) or (0 > `test`.`t1`.`c`))
EXPLAIN SELECT * FROM t1 WHERE 0 NOT BETWEEN b AND c;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index_merge	idx1,idx2	idx1,idx2	4,4	NULL	4	100.00	Using sort_union(idx1,idx2); Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`b` AS `b`,`test`.`t1`.`c` AS `c` from `test`.`t1` where (0 not between `test`.`t1`.`b` and `test`.`t1`.`c`)
EXPLAIN FORMAT=tree SELECT * FROM t1 WHERE 0 NOT BETWEEN b AND c;
EXPLAIN
-> Filter: (0 not between t1.b and t1.c)  (cost=2.27 rows=4)
    -> Index range scan on t1 using sort_union(idx1,idx2)  (cost=2.27 rows=4)

DROP TABLE t1;
CREATE TABLE t1 (                                      
item char(20) NOT NULL default '',                          
started datetime NOT NULL default '0000-00-00 00:00:00', 
price decimal(16,3) NOT NULL default '0.000',                 
PRIMARY KEY (item,started)                     
) ENGINE=MyISAM, CHARSET utf8mb4;
INSERT INTO t1 VALUES
('A1','2005-11-01 08:00:00',1000),
('A1','2005-11-15 00:00:00',2000),
('A1','2005-12-12 08:00:00',3000),
('A2','2005-12-01 08:00:00',1000);
EXPLAIN SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-01 24:00:00';
ERROR HY000: Incorrect DATETIME value: '2005-12-01 24:00:00'
SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-01 24:00:00';
ERROR HY000: Incorrect DATETIME value: '2005-12-01 24:00:00'
SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-02 00:00:00';
item	started	price
A1	2005-11-01 08:00:00	1000.000
A1	2005-11-15 00:00:00	2000.000
DROP INDEX `PRIMARY` ON t1;
EXPLAIN SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-01 24:00:00';
ERROR HY000: Incorrect DATETIME value: '2005-12-01 24:00:00'
SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-01 24:00:00';
ERROR HY000: Incorrect DATETIME value: '2005-12-01 24:00:00'
SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-02 00:00:00';
item	started	price
A1	2005-11-01 08:00:00	1000.000
A1	2005-11-15 00:00:00	2000.000
DROP TABLE t1;

BUG#32198 "Comparison of DATE with DATETIME still not using indexes correctly"

CREATE TABLE t1 (
id int(11) NOT NULL auto_increment,
dateval date default NULL,
PRIMARY KEY  (id),
KEY dateval (dateval)
) AUTO_INCREMENT=173;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES
(1,'2007-01-01'),(2,'2007-01-02'),(3,'2007-01-03'),(4,'2007-01-04'),
(5,'2007-01-05'),(6,'2007-01-06'),(7,'2007-01-07'),(8,'2007-01-08'),
(9,'2007-01-09'),(10,'2007-01-10'),(11,'2007-01-11');
This must use range access:
explain select * from t1 where dateval >= '2007-01-01 00:00:00' and dateval <= '2007-01-02 23:59:59';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	dateval	dateval	4	NULL	2	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`id` AS `id`,`test`.`t1`.`dateval` AS `dateval` from `test`.`t1` where ((`test`.`t1`.`dateval` >= DATE'2007-01-01') and (`test`.`t1`.`dateval` <= DATE'2007-01-02'))
drop table t1;
CREATE TABLE t1 (
a varchar(32), index (a)
) DEFAULT CHARSET=latin1 COLLATE=latin1_bin;
INSERT INTO t1 VALUES
('B'), ('A'), ('A'), ('C'), ('B'), ('A'), ('A');
SELECT a FROM t1 WHERE a='b' OR a='B';
a
B
B
EXPLAIN SELECT a FROM t1 WHERE a='b' OR a='B';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	35	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a` from `test`.`t1` where ((`test`.`t1`.`a` = 'b') or (`test`.`t1`.`a` = 'B'))
DROP TABLE t1;
CREATE TABLE t1 (f1 TINYINT(11) UNSIGNED NOT NULL, PRIMARY KEY (f1));
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES (127),(254),(0),(1),(255);
SELECT COUNT(*) FROM t1 WHERE f1 < 256;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 < 256.0;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 < 255;
COUNT(*)
4
SELECT COUNT(*) FROM t1 WHERE f1 < -1;
COUNT(*)
0
SELECT COUNT(*) FROM t1 WHERE f1 > -1;
COUNT(*)
5
DROP TABLE t1;
CREATE TABLE t1 ( f1 TINYINT(11) NOT NULL, PRIMARY KEY (f1));
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t1 VALUES (127),(126),(0),(-128),(-127);
SELECT COUNT(*) FROM t1 WHERE f1 < 128;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 < 128.0;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 < 127;
COUNT(*)
4
SELECT COUNT(*) FROM t1 WHERE f1 > -129;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 > -129.0;
COUNT(*)
5
SELECT COUNT(*) FROM t1 WHERE f1 > -128;
COUNT(*)
4
DROP TABLE t1;
create table t1 (a int);
insert into t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t2 (a int, b int, filler char(100));
insert into t2 select A.a + 10 * (B.a + 10 * C.a), 10, 'filler' from t1 A,
t1 B, t1 C where A.a < 5;
insert into t2 select 1000, b, 'filler' from t2;
alter table t2 add index (a,b);
Access method can be range/ALL with #rows >= 500.
Or it can be ref with #rows = 2, only when there is memory limit.
explain select * from t2 where a=1000 and b<11;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	a	a	10	NULL	502	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b`,`test`.`t2`.`filler` AS `filler` from `test`.`t2` where ((`test`.`t2`.`a` = 1000) and (`test`.`t2`.`b` < 11))
drop table t1, t2;
CREATE TABLE t1( a INT, b INT, KEY( a, b ) );
CREATE TABLE t2( a INT, b INT, KEY( a, b ) );
CREATE TABLE t3( a INT, b INT, KEY( a, b ) );
INSERT INTO t1( a, b ) 
VALUES (0, 1), (1, 2), (1, 4), (2, 3), (5, 0), (9, 7);
INSERT INTO t2( a, b ) 
VALUES ( 1, 1), ( 2, 1), ( 3, 1), ( 4, 1), ( 5, 1),
( 6, 1), ( 7, 1), ( 8, 1), ( 9, 1), (10, 1), 
(11, 1), (12, 1), (13, 1), (14, 1), (15, 1),
(16, 1), (17, 1), (18, 1), (19, 1), (20, 1);
INSERT INTO t2 SELECT a, 2 FROM t2 WHERE b = 1;
INSERT INTO t2 SELECT a, 3 FROM t2 WHERE b = 1;
INSERT INTO t2 SELECT -1, -1 FROM t2;
INSERT INTO t2 SELECT -1, -1 FROM t2;
INSERT INTO t2 SELECT -1, -1 FROM t2;
INSERT INTO t3
VALUES (1, 0), (2, 0), (3, 0), (4, 0), (5, 0),
(6, 0), (7, 0), (8, 0), (9, 0), (10, 0);
INSERT INTO t3 SELECT * FROM t3 WHERE a = 10;
INSERT INTO t3 SELECT * FROM t3 WHERE a = 10;
SELECT * FROM t1 WHERE
3 <= a AND a < 5 OR 
5 < a AND b = 3 OR
3 <= a;
a	b
5	0
9	7
EXPLAIN
SELECT * FROM t1 WHERE
3 <= a AND a < 5 OR 
5 < a AND b = 3 OR
3 <= a;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((3 <= `test`.`t1`.`a`) and (`test`.`t1`.`a` < 5)) or ((`test`.`t1`.`b` = 3) and (5 < `test`.`t1`.`a`)) or (3 <= `test`.`t1`.`a`))
SELECT * FROM t1 WHERE
3 <= a AND a < 5 OR 
5 <= a AND b = 3 OR
3 <= a;
a	b
5	0
9	7
EXPLAIN
SELECT * FROM t1 WHERE
3 <= a AND a < 5 OR 
5 <= a AND b = 3 OR
3 <= a;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	4	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((3 <= `test`.`t1`.`a`) and (`test`.`t1`.`a` < 5)) or ((`test`.`t1`.`b` = 3) and (5 <= `test`.`t1`.`a`)) or (3 <= `test`.`t1`.`a`))
SELECT * FROM t1 WHERE
3 <= a AND a <= 5 OR 
5 <= a AND b = 3 OR
3 <= a;
a	b
5	0
9	7
EXPLAIN
SELECT * FROM t1 WHERE
3 <= a AND a <= 5 OR 
5 <= a AND b = 3 OR
3 <= a;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((3 <= `test`.`t1`.`a`) and (`test`.`t1`.`a` <= 5)) or ((`test`.`t1`.`b` = 3) and (5 <= `test`.`t1`.`a`)) or (3 <= `test`.`t1`.`a`))
SELECT * FROM t1 WHERE
3 <= a AND a <= 5 OR 
3 <= a;
a	b
5	0
9	7
EXPLAIN
SELECT * FROM t1 WHERE
3 <= a AND a <= 5 OR 
3 <= a;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((3 <= `test`.`t1`.`a`) and (`test`.`t1`.`a` <= 5)) or (3 <= `test`.`t1`.`a`))
SELECT * FROM t2 WHERE
5 <= a AND a < 10 AND b = 1 OR
15 <= a AND a < 20 AND b = 3
OR
1 <= a AND b = 1;
a	b
1	1
2	1
3	1
4	1
5	1
6	1
7	1
8	1
9	1
10	1
11	1
12	1
13	1
14	1
15	1
15	3
16	1
16	3
17	1
17	3
18	1
18	3
19	1
19	3
20	1
EXPLAIN
SELECT * FROM t2 WHERE
5 <= a AND a < 10 AND b = 1 OR
15 <= a AND a < 20 AND b = 3
OR
1 <= a AND b = 1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	a	a	10	NULL	50	27.10	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t2` where (((`test`.`t2`.`b` = 1) and (5 <= `test`.`t2`.`a`) and (`test`.`t2`.`a` < 10)) or ((`test`.`t2`.`b` = 3) and (15 <= `test`.`t2`.`a`) and (`test`.`t2`.`a` < 20)) or ((`test`.`t2`.`b` = 1) and (1 <= `test`.`t2`.`a`)))
SELECT * FROM t2 WHERE
5 <= a AND a < 10 AND b = 2 OR
15 <= a AND a < 20 AND b = 3
OR
1 <= a AND b = 1;
a	b
1	1
2	1
3	1
4	1
5	1
5	2
6	1
6	2
7	1
7	2
8	1
8	2
9	1
9	2
10	1
11	1
12	1
13	1
14	1
15	1
15	3
16	1
16	3
17	1
17	3
18	1
18	3
19	1
19	3
20	1
EXPLAIN
SELECT * FROM t2 WHERE
5 <= a AND a < 10 AND b = 2 OR
15 <= a AND a < 20 AND b = 3
OR
1 <= a AND b = 1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	a	a	10	NULL	50	27.10	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t2` where (((`test`.`t2`.`b` = 2) and (5 <= `test`.`t2`.`a`) and (`test`.`t2`.`a` < 10)) or ((`test`.`t2`.`b` = 3) and (15 <= `test`.`t2`.`a`) and (`test`.`t2`.`a` < 20)) or ((`test`.`t2`.`b` = 1) and (1 <= `test`.`t2`.`a`)))
SELECT * FROM t3 WHERE
5 <= a AND a < 10 AND b = 3 OR 
a < 5 OR
a < 10;
a	b
1	0
2	0
3	0
4	0
5	0
6	0
7	0
8	0
9	0
EXPLAIN
SELECT * FROM t3 WHERE
5 <= a AND a < 10 AND b = 3 OR 
a < 5 OR
a < 10;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t3	NULL	range	a	a	5	NULL	8	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t3`.`a` AS `a`,`test`.`t3`.`b` AS `b` from `test`.`t3` where (((`test`.`t3`.`b` = 3) and (5 <= `test`.`t3`.`a`) and (`test`.`t3`.`a` < 10)) or (`test`.`t3`.`a` < 5) or (`test`.`t3`.`a` < 10))
DROP TABLE t1, t2, t3;
#
# Bug #47123: Endless 100% CPU loop with STRAIGHT_JOIN
#
CREATE TABLE t1(a INT, KEY(a));
INSERT INTO t1 VALUES (1), (NULL);
SELECT * FROM t1 WHERE a <> NULL and (a <> NULL or a <= NULL);
a
DROP TABLE t1;
#
# Bug#47925: regression of range optimizer and date comparison in 5.1.39!
#
CREATE TABLE t1 ( a DATE,     KEY ( a ) );
CREATE TABLE t2 ( a DATETIME, KEY ( a ) );
# Make optimizer choose range scan
INSERT INTO t1 VALUES ('2009-09-22'), ('2009-09-22'), ('2009-09-22');
INSERT INTO t1 VALUES ('2009-09-23'), ('2009-09-23'), ('2009-09-23');
INSERT INTO t2 VALUES ('2009-09-22 12:00:00'), ('2009-09-22 12:00:00'),
('2009-09-22 12:00:00');
INSERT INTO t2 VALUES ('2009-09-23 12:00:00'), ('2009-09-23 12:00:00'),
('2009-09-23 12:00:00');
# DATE vs DATE
EXPLAIN
SELECT * FROM t1 WHERE a >= '2009/09/23';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
X	X	X	NULL	range	a	a	X	X	X	100.00	X
Warnings:
X	X	X
SELECT * FROM t1 WHERE a >= '2009/09/23';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '20090923';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >=  20090923;
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009-9-23';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009.09.23';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009:09:23';
a
2009-09-23
2009-09-23
2009-09-23
# DATE vs DATETIME
EXPLAIN
SELECT * FROM t2 WHERE a >= '2009/09/23';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
X	X	X	NULL	range	a	a	X	X	X	100.00	X
Warnings:
X	X	X
SELECT * FROM t2 WHERE a >= '2009/09/23';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009/09/23';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '20090923';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >=  20090923;
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009-9-23';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009.09.23';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009:09:23';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
# DATETIME vs DATETIME
EXPLAIN
SELECT * FROM t2 WHERE a >= '2009/09/23 12:00:00';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
X	X	X	NULL	range	a	a	X	X	X	100.00	X
Warnings:
X	X	X
SELECT * FROM t2 WHERE a >= '2009/09/23 12:00:00';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '20090923120000';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >=  20090923120000;
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009-9-23 12:00:00';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009.09.23 12:00:00';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
SELECT * FROM t2 WHERE a >= '2009:09:23 12:00:00';
a
2009-09-23 12:00:00
2009-09-23 12:00:00
2009-09-23 12:00:00
# DATETIME vs DATE
EXPLAIN
SELECT * FROM t1 WHERE a >= '2009/09/23 00:00:00';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
X	X	X	NULL	range	a	a	X	X	X	100.00	X
Warnings:
X	X	X
SELECT * FROM t1 WHERE a >= '2009/09/23 00:00:00';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009/09/23 00:00:00';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '20090923000000';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >=  20090923000000;
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009-9-23 00:00:00';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009.09.23 00:00:00';
a
2009-09-23
2009-09-23
2009-09-23
SELECT * FROM t1 WHERE a >= '2009:09:23 00:00:00';
a
2009-09-23
2009-09-23
2009-09-23
# Test of the new get_date_from_str implementation
# Behavior differs slightly between the trunk and mysql-pe.
# The former may give errors for the truncated values, while the latter
# gives warnings. The purpose of this test is not to interfere, and only
# preserve existing behavior.
# This case was made obsolete after the changes applied by
# Bug#28940878 WRONG RESULT WHEN COMPARING DATE[TIME] WITH STRING
# as we don't fallback anymore to string comparison if the date is invalid.
SELECT str_to_date('2007-10-00', '%Y-%m-%d') >= '' AND 
str_to_date('2007-10-00', '%Y-%m-%d') <= '2007/10/20';
ERROR HY000: Incorrect DATE value: ''
SELECT str_to_date('2007-20-00', '%Y-%m-%d') >= '2007/10/20' AND 
str_to_date('2007-20-00', '%Y-%m-%d') <= '';
ERROR HY000: Incorrect DATE value: ''
SELECT str_to_date('2007-10-00', '%Y-%m-%d') BETWEEN '' AND '2007/10/20';
str_to_date('2007-10-00', '%Y-%m-%d') BETWEEN '' AND '2007/10/20'
1
Warnings:
Warning	1292	Truncated incorrect date value: ''
SELECT str_to_date('2007-20-00', '%Y-%m-%d') BETWEEN '2007/10/20' AND '';
str_to_date('2007-20-00', '%Y-%m-%d') BETWEEN '2007/10/20' AND ''
NULL
Warnings:
Warning	1411	Incorrect datetime value: '2007-20-00' for function str_to_date
SELECT str_to_date('', '%Y-%m-%d');
str_to_date('', '%Y-%m-%d')
0000-00-00
DROP TABLE t1, t2;
#
# Bug#48459: valgrind errors with query using 'Range checked for each 
# record'
#
CREATE TABLE t1 (
a INT,
b CHAR(2),
c INT,
d INT,
KEY ( c ),
KEY ( d, a, b ( 2 ) ),
KEY ( b ( 1 ) )
);
INSERT INTO t1 VALUES ( NULL, 'a', 1, 2 ), ( NULL, 'a', 1, 2 ),
( 1,    'a', 1, 2 ), ( 1,    'a', 1, 2 );
CREATE TABLE t2 (
a INT,
c INT,
e INT,
KEY ( e )
);
INSERT INTO t2 VALUES ( 1, 1, NULL ), ( 1, 1, NULL );
# Should not give Valgrind warnings
SELECT 1
FROM t1, t2
WHERE t1.d <> '1' AND t1.b > '1'
AND t1.a = t2.a AND t1.c = t2.c;
1
1
1
1
1
DROP TABLE t1, t2;
#
# Bug #48665: sql-bench's insert test fails due to wrong result
#
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a));
INSERT INTO t1 VALUES (0,0), (1,1);
EXPLAIN 
SELECT * FROM t1 FORCE INDEX (PRIMARY) 
WHERE (a>=1 AND a<=2) OR (a>=4 AND a<=5) OR (a>=0 AND a <=10);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
@	@	@	NULL	range	@	@	@	@	@	100.00	@
Warnings:
@	@	@
# Should return 2 rows
SELECT * FROM t1 FORCE INDEX (PRIMARY) 
WHERE (a>=1 AND a<=2) OR (a>=4 AND a<=5) OR (a>=0 AND a <=10);
a	b
0	0
1	1
DROP TABLE t1;
#
# Bug #54802: 'NOT BETWEEN' evaluation is incorrect
#
CREATE TABLE t1 (c_key INT, c_notkey INT, KEY(c_key));
INSERT INTO t1 VALUES (1, 1), (2, 2), (3, 3);
EXPLAIN SELECT * FROM t1 WHERE 2 NOT BETWEEN c_notkey AND c_key;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	c_key	NULL	NULL	NULL	3	66.67	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c_key` AS `c_key`,`test`.`t1`.`c_notkey` AS `c_notkey` from `test`.`t1` where (2 not between `test`.`t1`.`c_notkey` and `test`.`t1`.`c_key`)
SELECT * FROM t1 WHERE 2 NOT BETWEEN c_notkey AND c_key;
c_key	c_notkey
1	1
3	3
DROP TABLE t1;
#
# Bug #57030: 'BETWEEN' evaluation is incorrect
#
CREATE TABLE t1(pk INT PRIMARY KEY, i4 INT);
CREATE UNIQUE INDEX i4_uq ON t1(i4);
INSERT INTO t1 VALUES (1,10), (2,20), (3,30);
EXPLAIN
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND 10;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	const	i4_uq	i4_uq	5	const	1	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select '1' AS `pk`,'10' AS `i4` from `test`.`t1` where true
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND 10;
pk	i4
1	10
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN i4 AND i4;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	const	i4_uq	i4_uq	5	const	1	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select '1' AS `pk`,'10' AS `i4` from `test`.`t1` where true
SELECT * FROM t1 WHERE 10 BETWEEN i4 AND i4;
pk	i4
1	10
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN 10 AND i4;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	i4_uq	i4_uq	5	NULL	3	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (10 between 10 and `test`.`t1`.`i4`)
SELECT * FROM t1 WHERE 10 BETWEEN 10 AND i4;
pk	i4
1	10
2	20
3	30
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN i4 AND 10;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	i4_uq	i4_uq	5	NULL	1	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (10 between `test`.`t1`.`i4` and 10)
SELECT * FROM t1 WHERE 10 BETWEEN i4 AND 10;
pk	i4
1	10
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN 10 AND 10;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	NULL	NULL	NULL	NULL	3	100.00	NULL
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1`
SELECT * FROM t1 WHERE 10 BETWEEN 10 AND 10;
pk	i4
1	10
2	20
3	30
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN 11 AND 11;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible WHERE
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where false
SELECT * FROM t1 WHERE 10 BETWEEN 11 AND 11;
pk	i4
EXPLAIN
SELECT * FROM t1 WHERE 10 BETWEEN 100 AND 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Impossible WHERE
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where false
SELECT * FROM t1 WHERE 10 BETWEEN 100 AND 0;
pk	i4
EXPLAIN
SELECT * FROM t1 WHERE i4 BETWEEN 100 AND 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	no matching row in const table
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (`test`.`t1`.`i4` between 100 and 0)
SELECT * FROM t1 WHERE i4 BETWEEN 100 AND 0;
pk	i4
EXPLAIN
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND 99999999999999999;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	i4_uq	i4_uq	5	NULL	3	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (`test`.`t1`.`i4` between 10 and 99999999999999999)
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND 99999999999999999;
pk	i4
1	10
2	20
3	30
EXPLAIN
SELECT * FROM t1 WHERE i4 BETWEEN 999999999999999 AND 30;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	no matching row in const table
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (`test`.`t1`.`i4` between 999999999999999 and 30)
SELECT * FROM t1 WHERE i4 BETWEEN 999999999999999 AND 30;
pk	i4
EXPLAIN
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND '20';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	i4_uq	i4_uq	5	NULL	1	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4` from `test`.`t1` where (`test`.`t1`.`i4` between 10 and '20')
SELECT * FROM t1 WHERE i4 BETWEEN 10 AND '20';
pk	i4
1	10
2	20
EXPLAIN
SELECT * FROM t1, t1 as t2 WHERE t2.pk BETWEEN t1.i4 AND t1.i4;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	i4_uq	NULL	NULL	NULL	3	100.00	NULL
1	SIMPLE	t2	NULL	eq_ref	PRIMARY	PRIMARY	4	test.t1.i4	1	100.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4`,`test`.`t2`.`pk` AS `pk`,`test`.`t2`.`i4` AS `i4` from `test`.`t1` join `test`.`t1` `t2` where (`test`.`t2`.`pk` between `test`.`t1`.`i4` and `test`.`t1`.`i4`)
EXPLAIN FORMAT=tree
SELECT * FROM t1, t1 as t2 WHERE t2.pk BETWEEN t1.i4 AND t1.i4;
EXPLAIN
-> Nested loop inner join  (cost=1.85 rows=3)
    -> Table scan on t1  (cost=0.80 rows=3)
    -> Filter: (t2.pk between t1.i4 and t1.i4)  (cost=0.28 rows=1)
        -> Single-row index lookup on t2 using PRIMARY (pk=t1.i4)  (cost=0.28 rows=1)

SELECT * FROM t1, t1 as t2 WHERE t2.pk BETWEEN t1.i4 AND t1.i4;
pk	i4	pk	i4
EXPLAIN
SELECT * FROM t1, t1 as t2 WHERE t1.i4 BETWEEN t2.pk AND t2.pk;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	i4_uq	NULL	NULL	NULL	3	100.00	NULL
1	SIMPLE	t2	NULL	eq_ref	PRIMARY	PRIMARY	4	test.t1.i4	1	100.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`pk` AS `pk`,`test`.`t1`.`i4` AS `i4`,`test`.`t2`.`pk` AS `pk`,`test`.`t2`.`i4` AS `i4` from `test`.`t1` join `test`.`t1` `t2` where (`test`.`t1`.`i4` between `test`.`t2`.`pk` and `test`.`t2`.`pk`)
SELECT * FROM t1, t1 as t2 WHERE t1.i4 BETWEEN t2.pk AND t2.pk;
pk	i4	pk	i4
DROP TABLE t1;
#
# BUG#13519696 - 62940: SELECT RESULTS VARY WITH VERSION AND
# WITH/WITHOUT INDEX RANGE SCAN
#
create table t1 (id int unsigned not null auto_increment primary key);
insert into t1 values (null);
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
insert into t1 select null from t1;
create table t2 (
id int unsigned not null auto_increment,
val decimal(5,3) not null,
primary key (id,val),
unique key (val,id),
unique key (id));
insert into t2 select null,id*0.0009 from t1;
select count(val) from t2 ignore index (val) where val > 0.1155;
count(val)
128
select count(val) from t2 force index (val)  where val > 0.1155;
count(val)
128
drop table t2, t1;
#
# BUG#13453382 - REGRESSION SINCE 5.1.39, RANGE OPTIMIZER WRONG
# RESULTS WITH DECIMAL CONVERSION
#
create table t1 (a int,b int,c int,primary key (a,c));
insert into t1 values (1,1,2),(1,1,3),(1,1,4);
select convert(3, signed integer) > 2.9;
convert(3, signed integer) > 2.9
1
select * from t1 force  index (primary) where a=1 and c>= 2.9;
a	b	c
1	1	3
1	1	4
select * from t1 ignore index (primary) where a=1 and c>= 2.9;
a	b	c
1	1	3
1	1	4
select * from t1 force  index (primary) where a=1 and c> 2.9;
a	b	c
1	1	3
1	1	4
select * from t1 ignore index (primary) where a=1 and c> 2.9;
a	b	c
1	1	3
1	1	4
drop table t1;
#
# BUG#13463488 - 63437: CHAR & BETWEEN WITH INDEX RETURNS WRONG
# RESULT AFTER MYSQL 5.1.
#
CREATE TABLE t1(
F1 CHAR(5) NOT NULL,
F2 CHAR(5) NOT NULL,
F3 CHAR(5) NOT NULL,
PRIMARY KEY(F1),
INDEX IDX_F2(F2)
) COLLATE latin1_swedish_ci;
INSERT INTO t1 VALUES
('A','A','A'),('AA','AA','AA'),('AAA','AAA','AAA'),
('AAAA','AAAA','AAAA'),('AAAAA','AAAAA','AAAAA');
SELECT * FROM t1 WHERE F1 = 'A    ';
F1	F2	F3
A	A	A
SELECT * FROM t1 IGNORE INDEX(PRIMARY) WHERE F1 = 'A    ';
F1	F2	F3
A	A	A
SELECT * FROM t1 WHERE F1 >= 'A    ';
F1	F2	F3
A	A	A
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
SELECT * FROM t1 WHERE F1 > 'A    ';
F1	F2	F3
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
SELECT * FROM t1 WHERE F1 BETWEEN 'A    ' AND 'AAAAA';
F1	F2	F3
A	A	A
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
SELECT * FROM t1 WHERE F2 BETWEEN 'A    ' AND 'AAAAA';
F1	F2	F3
A	A	A
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
SELECT * FROM t1 WHERE F3 BETWEEN 'A    ' AND 'AAAAA';
F1	F2	F3
A	A	A
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
SELECT * FROM t1 IGNORE INDEX(PRIMARY) WHERE F1 BETWEEN 'A    ' AND
'AAAAA';
F1	F2	F3
A	A	A
AA	AA	AA
AAA	AAA	AAA
AAAA	AAAA	AAAA
AAAAA	AAAAA	AAAAA
DROP TABLE t1;
End of 5.1 tests
CREATE TABLE t1 (c1 DECIMAL(10,0),INDEX(c1));
INSERT INTO t1 VALUES (1),(2),(3);
SELECT c1 FROM t1 WHERE c1 >= 'A' GROUP BY 1;
c1
1
2
3
Warnings:
Warning	1292	Truncated incorrect DECIMAL value: 'A'
DROP TABLE t1;
create table t1 (a int,b int,key (b),key (a),key (b,a));
insert into t1(a,b) values (1,2),(3,4),(5,6),(7,8);
create table t2 (c int);
insert into t2(c) values (1),(5),(6),(7),(8);
select 1 from (select c from t1,t2 where b >= 1 and a <=> c group by 1 limit 1) as d1;
1
1
drop table t1, t2;
#
# Bug #26106: Wrong plan may be chosen when there are several possible
# range and ref accesses
#
# Note: The fix for this bug has been reverted. The code will no longer
# select the optimal plan for the two following test queries. This is
# not due to a bug but due to minor differences in range estimates
# produced by the storage engine.
CREATE TABLE t1( 
a INT,
b INT,
KEY k ( a ),
KEY l ( a, b )
);
INSERT INTO t1(a) VALUES (1);
INSERT INTO t1 
VALUES (2,3),(2,3),(2,3),(2,3),(2,3),(2,3),(2,3),(2,3),(2,3),(2,3);
INSERT INTO t1 SELECT 3, 4 FROM t1 WHERE a = 2 AND b = 3;
INSERT INTO t1 SELECT 4, 1 FROM t1 WHERE a = 2 AND b = 3;
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
INSERT INTO t1 VALUES (1, 2);
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
INSERT INTO t1 SELECT a, b FROM t1 WHERE a=1 AND b=2;
# This must use range over index l, not k.
# Update: Due to patch being reverted and minor differences in 
#         range estimates k is selected.
EXPLAIN SELECT * FROM t1 WHERE a = 1 AND b >= 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	k,l	k	5	const	134	33.33	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` = 1) and (`test`.`t1`.`b` >= 2))
CREATE TABLE t2( 
a INT, 
b INT, 
c INT,
KEY k ( a ), 
KEY l ( a, b ),
KEY m ( b ), 
KEY n ( a, c )
);
INSERT INTO t2(a) VALUES (1);
INSERT INTO t2 
VALUES (2,3,3),(2,3,3),(2,3,3),(2,3,3),(2,3,3),
(2,3,3),(2,3,3),(2,3,3),(2,3,3),(2,3,3);
INSERT INTO t2 SELECT 3, 4, 4 FROM t2 WHERE a = 2 AND b = 3;
INSERT INTO t2 SELECT 4, 1, 1 FROM t2 WHERE a = 2 AND b = 3;
ANALYZE TABLE t2;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	OK
INSERT INTO t2 VALUES (1, 2, 2);
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 SELECT a, b, c FROM t2 WHERE a=1 AND b=2;
INSERT INTO t2 VALUES (1, 1, 2);
# This must use range over index l, not n.
# Update: Due to patch being reverted and minor differences in 
#         range estimates k is selected.
EXPLAIN SELECT * FROM t2 WHERE a = 1 AND b >= 2 AND c >= 2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	ref	k,l,m,n	k	5	const	66	29.16	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b`,`test`.`t2`.`c` AS `c` from `test`.`t2` where ((`test`.`t2`.`a` = 1) and (`test`.`t2`.`b` >= 2) and (`test`.`t2`.`c` >= 2))
DROP TABLE t1, t2;
#
# BUG#11765831: 'RANGE ACCESS' MAY INCORRECTLY FILTER 
#               AWAY QUALIFYING ROWS
#
CREATE TABLE t10(
K INT NOT NULL AUTO_INCREMENT,
I INT, J INT,
PRIMARY KEY(K),
KEY(I,J)
);
INSERT INTO t10(I,J) VALUES (6,1),(6,2),(6,3),(6,4),(6,5),
(6,6),(6,7),(6,8),(6,9),(6,0);
CREATE TABLE t100 LIKE t10;
INSERT INTO t100(I,J) SELECT X.I, X.K+(10*Y.K) FROM t10 AS X,t10 AS Y;
INSERT INTO t100(I,J) VALUES(8,26);

EXPLAIN SELECT * FROM t100 WHERE I <> 6 OR (I <> 8 AND J = 5);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t100	NULL	range	I	I	10	NULL	4	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t100`.`K` AS `K`,`test`.`t100`.`I` AS `I`,`test`.`t100`.`J` AS `J` from `test`.`t100` where ((`test`.`t100`.`I` <> 6) or ((`test`.`t100`.`J` = 5) and (`test`.`t100`.`I` <> 8)))

SELECT * FROM t100 WHERE I <> 6 OR (I <> 8 AND J = 5);
K	I	J
101	8	26
DROP TABLE t10,t100;
#
# BUG#12698916 - JOIN QUERY GIVES WRONG RESULT AT 2ND EXEC. OR
# AFTER FLUSH TABLES [-INT VS NULL]
#
CREATE TABLE t1 (col_int INT, pk INT) ENGINE=InnoDB STATS_PERSISTENT=0;
INSERT INTO t1 VALUES (-100,1),(1,6);
CREATE TABLE t2 (
col_int_key INT,
col_varchar VARCHAR(100) NOT NULL DEFAULT "DEFAULT",
pk INT NOT NULL,
PRIMARY KEY (pk),
KEY (col_int_key)
) ENGINE=InnoDB STATS_PERSISTENT=0;
INSERT INTO t2 VALUES
(1,"GOOD",1),(100,"",2),(200,"",3),(300,"",4),(400,"",5),(500,"",8);
EXPLAIN SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	NULL	NULL	NULL	NULL	2	100.00	Using where
1	SIMPLE	t2	NULL	ref	PRIMARY,col_int_key	col_int_key	5	test.t1.col_int	1	33.33	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`col_int` AS `col_int`,`test`.`t1`.`pk` AS `pk`,`test`.`t2`.`col_int_key` AS `col_int_key`,`test`.`t2`.`col_varchar` AS `col_varchar`,`test`.`t2`.`pk` AS `pk` from `test`.`t1` straight_join `test`.`t2` where ((`test`.`t2`.`col_int_key` = `test`.`t1`.`col_int`) and (`test`.`t2`.`pk` < `test`.`t1`.`pk`))
EXPLAIN FORMAT=tree SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
EXPLAIN
-> Nested loop inner join  (cost=1.15 rows=1)
    -> Filter: (t1.col_int is not null)  (cost=0.45 rows=2)
        -> Table scan on t1  (cost=0.45 rows=2)
    -> Filter: (t2.pk < t1.pk)  (cost=0.27 rows=0)
        -> Index lookup on t2 using col_int_key (col_int_key=t1.col_int)  (cost=0.27 rows=1)

SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
col_int	pk	col_int_key	col_varchar	pk
1	6	1	GOOD	1
# need FLUSH so that InnoDB statistics change and thus plan changes
FLUSH TABLES;
EXPLAIN SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	NULL	NULL	NULL	NULL	2	100.00	NULL
1	SIMPLE	t2	NULL	ALL	PRIMARY,col_int_key	NULL	NULL	NULL	6	33.33	Range checked for each record (index map: 0x3)
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`col_int` AS `col_int`,`test`.`t1`.`pk` AS `pk`,`test`.`t2`.`col_int_key` AS `col_int_key`,`test`.`t2`.`col_varchar` AS `col_varchar`,`test`.`t2`.`pk` AS `pk` from `test`.`t1` straight_join `test`.`t2` where ((`test`.`t2`.`col_int_key` = `test`.`t1`.`col_int`) and (`test`.`t2`.`pk` < `test`.`t1`.`pk`))
EXPLAIN FORMAT=tree SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
EXPLAIN
-> Nested loop inner join  (cost=1.90 rows=4)
    -> Table scan on t1  (cost=0.45 rows=2)
    -> Filter: ((t2.col_int_key = t1.col_int) and (t2.pk < t1.pk))  (cost=0.22 rows=2)
        -> Index range scan on t2 (re-planned for each iteration)  (cost=0.22 rows=6)

SELECT t1.*,t2.* FROM t1 straight_join t2
ON t2.col_int_key = t1.col_int WHERE t2.pk < t1.pk;
col_int	pk	col_int_key	col_varchar	pk
1	6	1	GOOD	1
DROP TABLE t1,t2;
#
# Bug#12694872 - 
# VALGRIND: 18,816 BYTES IN 196 BLOCKS ARE DEFINITELY LOST IN UNIQUE::GET
#
CREATE TABLE t1 (
pk INTEGER AUTO_INCREMENT,
col_int_nokey INTEGER NOT NULL,
col_int_key INTEGER NOT NULL,
col_date_key DATE NOT NULL,
col_varchar_key VARCHAR(1) NOT NULL,
col_varchar_nokey VARCHAR(1) NOT NULL,
PRIMARY KEY (pk),
KEY (col_int_key),
KEY (col_date_key),
KEY (col_varchar_key, col_int_key)
);
INSERT INTO t1 (
col_int_key,
col_int_nokey,
col_date_key,
col_varchar_key,
col_varchar_nokey
) VALUES 
(0, 4, '2011-08-25', 'j', 'j'),
(8, 6, '2004-09-18', 'v', 'v'),
(1, 3, '2009-12-01', 'c', 'c'),
(8, 5, '2004-12-17', 'm', 'm'),
(9, 3, '2000-03-14', 'd', 'd'),
(6, 2, '2006-05-25', 'y', 'y'),
(1, 9, '2008-01-23', 't', 't'),
(6, 3, '2007-06-18', 'd', 'd'),
(2, 8, '2002-10-13', 's', 's'),
(4, 1, '1900-01-01', 'r', 'r'),
(8, 8, '1959-04-25', 'm', 'm'),
(4, 8, '2006-03-09', 'b', 'b'),
(4, 5, '2001-06-05', 'x', 'x'),
(7, 7, '2006-05-28', 'g', 'g'),
(4, 5, '2001-04-19', 'p', 'p'),
(1, 1, '1900-01-01', 'q', 'q'),
(9, 6, '2004-08-20', 'w', 'w'),
(4, 2, '2004-10-10', 'd', 'd'),
(8, 9, '2000-04-02', 'e', 'e')
;
ALTER TABLE t1 DISABLE KEYS;
SELECT table2.col_date_key AS field1,
CONCAT ( table2.col_varchar_nokey, table1.col_varchar_nokey ) AS field2
FROM ( t1 AS table1 INNER JOIN t1 AS table2
ON (( table2.pk <> table1.pk ) AND
( table2.pk >= table1.col_int_nokey ) ) )
WHERE ( table1.pk > 226 AND
table1.pk < ( 226 + 102 ) OR
( table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 36 ) OR
( table1.col_varchar_key <= 'h' OR
table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 227 ) )
) 
)
;
field1	field2
1900-01-01	qb
1900-01-01	qc
1900-01-01	qd
1900-01-01	qd
1900-01-01	qd
1900-01-01	qe
1900-01-01	qg
1900-01-01	rb
1900-01-01	rc
1900-01-01	rd
1900-01-01	rd
1900-01-01	rd
1900-01-01	re
1900-01-01	rg
1959-04-25	mb
1959-04-25	mc
1959-04-25	md
1959-04-25	md
1959-04-25	md
1959-04-25	me
1959-04-25	mg
2000-03-14	dc
2000-03-14	dd
2000-03-14	dd
2000-04-02	eb
2000-04-02	ec
2000-04-02	ed
2000-04-02	ed
2000-04-02	ed
2000-04-02	eg
2001-04-19	pb
2001-04-19	pc
2001-04-19	pd
2001-04-19	pd
2001-04-19	pd
2001-04-19	pe
2001-04-19	pg
2001-06-05	xb
2001-06-05	xc
2001-06-05	xd
2001-06-05	xd
2001-06-05	xd
2001-06-05	xe
2001-06-05	xg
2002-10-13	sb
2002-10-13	sc
2002-10-13	sd
2002-10-13	sd
2002-10-13	sd
2002-10-13	se
2002-10-13	sg
2004-08-20	wb
2004-08-20	wc
2004-08-20	wd
2004-08-20	wd
2004-08-20	wd
2004-08-20	we
2004-08-20	wg
2004-09-18	vd
2004-10-10	db
2004-10-10	dc
2004-10-10	dd
2004-10-10	dd
2004-10-10	de
2004-10-10	dg
2004-12-17	mc
2004-12-17	md
2004-12-17	md
2004-12-17	md
2006-03-09	bc
2006-03-09	bd
2006-03-09	bd
2006-03-09	bd
2006-03-09	be
2006-03-09	bg
2006-05-25	yc
2006-05-25	yd
2006-05-25	yd
2006-05-25	yd
2006-05-28	gb
2006-05-28	gc
2006-05-28	gd
2006-05-28	gd
2006-05-28	gd
2006-05-28	ge
2007-06-18	db
2007-06-18	dc
2007-06-18	dd
2007-06-18	dd
2007-06-18	dg
2008-01-23	tc
2008-01-23	td
2008-01-23	td
2008-01-23	td
2008-01-23	tg
2009-12-01	cd
2009-12-01	cd
2009-12-01	cd
ALTER TABLE t1 ENABLE KEYS;
CREATE TABLE t2 SELECT table2.col_date_key AS field1,
CONCAT ( table2.col_varchar_nokey, table1.col_varchar_nokey ) AS field2
FROM ( t1 AS table1 INNER JOIN t1 AS table2
ON (( table2.pk <> table1.pk ) AND
( table2.pk >= table1.col_int_nokey ) ) )
WHERE ( table1.pk > 226 AND
table1.pk < ( 226 + 102 ) OR
( table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 36 ) OR
( table1.col_varchar_key <= 'h' OR
table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 227 ) )
) 
)
;
SELECT * FROM t2
WHERE (field1, field2) IN (SELECT table2.col_date_key AS field1,
CONCAT ( table2.col_varchar_nokey, table1.col_varchar_nokey ) AS field2
FROM ( t1 AS table1 INNER JOIN t1 AS table2
ON (( table2.pk <> table1.pk ) AND
( table2.pk >= table1.col_int_nokey ) ) )
WHERE ( table1.pk > 226 AND
table1.pk < ( 226 + 102 ) OR
( table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 36 ) OR
( table1.col_varchar_key <= 'h' OR
table1.col_int_key > 226 AND
table1.col_int_key < ( 226 + 227 ) )
) 
)
);
field1	field2
1900-01-01	qb
1900-01-01	qc
1900-01-01	qd
1900-01-01	qd
1900-01-01	qd
1900-01-01	qe
1900-01-01	qg
1900-01-01	rb
1900-01-01	rc
1900-01-01	rd
1900-01-01	rd
1900-01-01	rd
1900-01-01	re
1900-01-01	rg
1959-04-25	mb
1959-04-25	mc
1959-04-25	md
1959-04-25	md
1959-04-25	md
1959-04-25	me
1959-04-25	mg
2000-03-14	dc
2000-03-14	dd
2000-03-14	dd
2000-04-02	eb
2000-04-02	ec
2000-04-02	ed
2000-04-02	ed
2000-04-02	ed
2000-04-02	eg
2001-04-19	pb
2001-04-19	pc
2001-04-19	pd
2001-04-19	pd
2001-04-19	pd
2001-04-19	pe
2001-04-19	pg
2001-06-05	xb
2001-06-05	xc
2001-06-05	xd
2001-06-05	xd
2001-06-05	xd
2001-06-05	xe
2001-06-05	xg
2002-10-13	sb
2002-10-13	sc
2002-10-13	sd
2002-10-13	sd
2002-10-13	sd
2002-10-13	se
2002-10-13	sg
2004-08-20	wb
2004-08-20	wc
2004-08-20	wd
2004-08-20	wd
2004-08-20	wd
2004-08-20	we
2004-08-20	wg
2004-09-18	vd
2004-10-10	db
2004-10-10	dc
2004-10-10	dd
2004-10-10	dd
2004-10-10	de
2004-10-10	dg
2004-12-17	mc
2004-12-17	md
2004-12-17	md
2004-12-17	md
2006-03-09	bc
2006-03-09	bd
2006-03-09	bd
2006-03-09	bd
2006-03-09	be
2006-03-09	bg
2006-05-25	yc
2006-05-25	yd
2006-05-25	yd
2006-05-25	yd
2006-05-28	gb
2006-05-28	gc
2006-05-28	gd
2006-05-28	gd
2006-05-28	gd
2006-05-28	ge
2007-06-18	db
2007-06-18	dc
2007-06-18	dd
2007-06-18	dd
2007-06-18	dg
2008-01-23	tc
2008-01-23	td
2008-01-23	td
2008-01-23	td
2008-01-23	tg
2009-12-01	cd
2009-12-01	cd
2009-12-01	cd
DROP TABLE t1, t2;
#
# BUG#12912171 - ASSERTION FAILED: QUICK->HEAD->READ_SET ==
# SAVE_READ_SET
#
CREATE TABLE t1 (
a INT,
b INT,
c INT,
PRIMARY KEY (c,a), KEY (a),KEY (a)
) ENGINE=INNODB PARTITION BY KEY () PARTITIONS 2;
Warnings:
Warning	1831	Duplicate index 'a_2' defined on the table 'test.t1'. This is deprecated and will be disallowed in a future release.
INSERT INTO t1 VALUES (1,5,1),(2,4,1),(3,3,1),(4,2,1),(5,1,1);
UPDATE t1 SET b = 0, c=1 WHERE a <=>0;
SELECT * FROM t1;
a	b	c
1	5	1
2	4	1
3	3	1
4	2	1
5	1	1
DROP TABLE t1;
#
# BUG#13256446 - ASSERTION QUICK->HEAD->READ_SET ==
# SAVE_READ_SET' FAILED IN OPT_RANGE.CC:1606 
#
CREATE TABLE t1 (
f1 INT AUTO_INCREMENT,
f2 INT,
f3 INT,
f4 INT,
PRIMARY KEY (f1),KEY(f2)
) ENGINE=INNODB;
CREATE ALGORITHM=MERGE VIEW v2 AS SELECT f1,f2,f3,f4 FROM t1 WHERE f2=103;
INSERT INTO t1 VALUES (154,0,NULL,0),(0,NULL,9,0),
(NULL,102,NULL,3),(0,3,NULL,0), (9,0,NULL,0),(0,9,NULL,157);
SELECT * FROM v2;
f1	f2	f3	f4
UPDATE v2 SET f4=0, f2=NULL, f1=NULL WHERE f1 > 16 ORDER BY f1;
SELECT * FROM v2;
f1	f2	f3	f4
DROP TABLE t1;
DROP VIEW v2;
CREATE TABLE t1 (
f1 INT AUTO_INCREMENT,
f2 INT,
f3 INT,
f4 INT,
PRIMARY KEY (f1),KEY(f2)
) ENGINE=INNODB;
INSERT INTO t1 VALUES(1,NULL,NULL,0), (2,2,0,3), (9,0,107,18),
(10,0,0,0), (231,0,0,0), (232,0,8,0), (234,0,0,NULL), (235,8,0,3);
CREATE ALGORITHM=MERGE VIEW v3 AS SELECT f1,f2,f3,f4 FROM t1 WHERE f1<=85 ;
SELECT * FROM v3;
f1	f2	f3	f4
1	NULL	NULL	0
2	2	0	3
9	0	107	18
10	0	0	0
UPDATE v3 SET f3=0, f4=4 WHERE f2=68 ORDER BY f1;
SELECT * FROM v3;
f1	f2	f3	f4
1	NULL	NULL	0
2	2	0	3
9	0	107	18
10	0	0	0
DROP TABLE t1;
DROP VIEW v3;
#
# BUG#13731380: RANGE OPTIMIZER CALLS RECORDS_IN_RANGE() FOR OPEN RANGE
#
CREATE TABLE t1 (pk INT PRIMARY KEY);
INSERT INTO t1 VALUES (1),(3),(5);
SELECT * FROM t1 WHERE pk <> 3 OR pk < 4;
pk
1
3
5
DROP TABLE t1;
#
# BUG#13803810: TOO FEW ROWS RETURNED FOR RANGE ACCESS IN 
#               VARCHAR INDEX USING DATETIME VALUE

CREATE TABLE t1 (a DATETIME);
INSERT INTO t1 VALUES ('2001-01-01 00:00:00');
INSERT INTO t1 VALUES ('2001-01-01 11:22:33');
CREATE TABLE t2 (b VARCHAR(64), KEY (b)) CHARSET utf8mb4;
INSERT INTO t2 VALUES ('2001-01-01');
INSERT INTO t2 VALUES ('2001.01.01');
INSERT INTO t2 VALUES ('2001#01#01');
INSERT INTO t2 VALUES ('2001-01-01 00:00:00');
INSERT INTO t2 VALUES ('2001-01-01 11:22:33');

# range/ref access cannot be used for this query

EXPLAIN SELECT * FROM t2 WHERE b=CAST('2001-01-01' AS DATE);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	index	b	b	259	NULL	5	20.00	Using where; Using index
Warnings:
Warning	1739	Cannot use ref access on index 'b' due to type or collation conversion on field 'b'
Warning	1739	Cannot use range access on index 'b' due to type or collation conversion on field 'b'
Note	1003	/* select#1 */ select `test`.`t2`.`b` AS `b` from `test`.`t2` where (`test`.`t2`.`b` = <cache>(cast('2001-01-01' as date)))
SELECT * FROM t2 WHERE b=CAST('2001-01-01' AS DATE);
b
2001-01-01
2001-01-01 00:00:00
2001.01.01
2001#01#01

# range/ref access cannot be used for any of the queries below.
# See BUG#13814468 about 'Range checked for each record'

EXPLAIN SELECT * FROM t1, t2 WHERE a=b ORDER BY BINARY a, BINARY b;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
1	SIMPLE	t2	NULL	index	b	b	259	NULL	5	20.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Warning	1739	Cannot use ref access on index 'b' due to type or collation conversion on field 'b'
Warning	1739	Cannot use range access on index 'b' due to type or collation conversion on field 'b'
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t1` join `test`.`t2` where (`test`.`t1`.`a` = `test`.`t2`.`b`) order by cast(`test`.`t1`.`a` as char charset binary),cast(`test`.`t2`.`b` as char charset binary)
SELECT * FROM t1, t2 WHERE a=b ORDER BY BINARY a, BINARY b;
a	b
2001-01-01 00:00:00	2001#01#01
2001-01-01 00:00:00	2001-01-01
2001-01-01 00:00:00	2001-01-01 00:00:00
2001-01-01 00:00:00	2001.01.01
2001-01-01 11:22:33	2001-01-01 11:22:33

EXPLAIN SELECT * FROM t1, t2 WHERE b=a ORDER BY BINARY a, BINARY b;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	NULL	NULL	NULL	NULL	2	100.00	Using temporary; Using filesort
1	SIMPLE	t2	NULL	index	b	b	259	NULL	5	20.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Warning	1739	Cannot use ref access on index 'b' due to type or collation conversion on field 'b'
Warning	1739	Cannot use range access on index 'b' due to type or collation conversion on field 'b'
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t1` join `test`.`t2` where (`test`.`t2`.`b` = `test`.`t1`.`a`) order by cast(`test`.`t1`.`a` as char charset binary),cast(`test`.`t2`.`b` as char charset binary)
SELECT * FROM t1, t2 WHERE b=a ORDER BY BINARY a, BINARY b;
a	b
2001-01-01 00:00:00	2001#01#01
2001-01-01 00:00:00	2001-01-01
2001-01-01 00:00:00	2001-01-01 00:00:00
2001-01-01 00:00:00	2001.01.01
2001-01-01 11:22:33	2001-01-01 11:22:33

DROP TABLE t1,t2;
#
# WL#7019: Add support for row value constructors in in predicates to
# range optimizer
#
CREATE TABLE t1 (a INT, b INT, c INT, KEY x(a, b));
INSERT INTO t1 VALUES (2, 2, 2), (3, 3, 3), (4, 4, 4), (5, 5, 5), (6, 6, 6),
(7, 7, 7), (8, 8, 8), (9, 9, 9);
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 SELECT * FROM t1;
INSERT INTO t1 VALUES (0, 0, 0), (1, 1, 1);
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
CREATE TABLE t2 (a INT, b INT, c INT, d INT, KEY x(a, b));
INSERT INTO t2 VALUES (2, 2, 2, 2), (3, 3, 3, 3), (4, 4, 4, 4), (5, 5, 5, 5),
(6, 6, 6, 6), (7, 7, 7, 7), (8, 8, 8, 8), (9, 9, 9, 9);
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 VALUES (0, 0, 0, 0), (1, 1, 1, 1);
ANALYZE TABLE t2;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	OK
CREATE TABLE t3 (a INT, b INT, c INT, d INT, KEY x(a, b, c));
INSERT INTO t3 VALUES (2, 2, 2, 2), (3, 3, 3, 3), (4, 4, 4, 4), (5, 5, 5, 5),
(6, 6, 6, 6), (7, 7, 7, 7), (8, 8, 8, 8), (9, 9, 9, 9);
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 SELECT * FROM t3;
INSERT INTO t3 VALUES (0, 0, 0, 0), (1, 1, 1, 1);
ANALYZE TABLE t3;
Table	Op	Msg_type	Msg_text
test.t3	analyze	status	OK
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((NULL, NULL), (NULL, NULL));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	no matching row in const table
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in ((NULL,NULL),(NULL,NULL)))
EXPLAIN SELECT a, b FROM t1 WHERE (a = 0 AND b = 0) OR (a = 1 AND b = 1);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((`test`.`t1`.`b` = 0) and (`test`.`t1`.`a` = 0)) or ((`test`.`t1`.`b` = 1) and (`test`.`t1`.`a` = 1)))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a = 0 AND b = 0) OR (a = 1 AND b = 1);
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((0, 0));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	x	x	10	const,const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 0) and (`test`.`t1`.`a` = 0))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN ((0, 0));
a	b
0	0
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	1
Handler_read_last	0
Handler_read_next	1
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in (<cache>((0,0)),<cache>((1,1))))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN ((0, 0), (1, 1));
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b, c FROM t2 WHERE (a, b, c) IN ((0, 0, 0), (1, 1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	x	x	10	NULL	2	20.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b`,`test`.`t2`.`c` AS `c` from `test`.`t2` where ((`test`.`t2`.`a`,`test`.`t2`.`b`,`test`.`t2`.`c`) in (<cache>((0,0,0)),<cache>((1,1,1))))
FLUSH STATUS;
SELECT a, b, c FROM t2 WHERE (a, b, c) IN ((0, 0, 0), (1, 1, 1));
a	b	c
0	0	0
1	1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	2
Handler_read_rnd_next	0
EXPLAIN SELECT a, b, c FROM t3 WHERE (a, b, c) IN ((0, 0, 0), (1, 1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t3	NULL	range	x	x	15	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t3`.`a` AS `a`,`test`.`t3`.`b` AS `b`,`test`.`t3`.`c` AS `c` from `test`.`t3` where ((`test`.`t3`.`a`,`test`.`t3`.`b`,`test`.`t3`.`c`) in (<cache>((0,0,0)),<cache>((1,1,1))))
FLUSH STATUS;
SELECT a, b, c FROM t3 WHERE (a, b, c) IN ((0, 0, 0), (1, 1, 1));
a	b	c
0	0	0
1	1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE a = 0 AND b = 0 OR (a, b) IN ((1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((`test`.`t1`.`b` = 0) and (`test`.`t1`.`a` = 0)) or ((`test`.`t1`.`b` = 1) and (`test`.`t1`.`a` = 1)))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE a = 0 AND b = 0 OR (a, b) IN ((1, 1));
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((1, 1)) OR a = 0 AND b = 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (((`test`.`t1`.`b` = 1) and (`test`.`t1`.`a` = 1)) or ((`test`.`t1`.`b` = 0) and (`test`.`t1`.`a` = 0)))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN ((1, 1)) OR a = 0 AND b = 0;
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t2 WHERE (a, b, c) IN ((1, 1, 1)) OR a = 0 AND b = 0 AND c = 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	x	x	10	NULL	2	19.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t2` where (((`test`.`t2`.`c` = 1) and (`test`.`t2`.`b` = 1) and (`test`.`t2`.`a` = 1)) or ((`test`.`t2`.`c` = 0) and (`test`.`t2`.`b` = 0) and (`test`.`t2`.`a` = 0)))
FLUSH STATUS;
SELECT a, b FROM t2 WHERE (a, b, c) IN ((1, 1, 1)) OR a = 0 AND b = 0 AND c = 0;
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	2
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t3 WHERE (a, b, c) IN ((1, 1, 1)) OR a = 0 AND b = 0 AND c = 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t3	NULL	range	x	x	15	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t3`.`a` AS `a`,`test`.`t3`.`b` AS `b` from `test`.`t3` where (((`test`.`t3`.`c` = 1) and (`test`.`t3`.`b` = 1) and (`test`.`t3`.`a` = 1)) or ((`test`.`t3`.`c` = 0) and (`test`.`t3`.`b` = 0) and (`test`.`t3`.`a` = 0)))
FLUSH STATUS;
SELECT a, b FROM t3 WHERE (a, b, c) IN ((1, 1, 1)) OR a = 0 AND b = 0 AND c = 0;
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN (((SELECT 1), 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	x	x	10	const,const	1	100.00	Using index
Warnings:
Note	1249	Select 2 was reduced during optimization
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 1) and (`test`.`t1`.`a` = 1))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN (((SELECT 1), 1));
a	b
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	1
Handler_read_last	0
Handler_read_next	1
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN (('0', 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in (<cache>(('0',0)),<cache>((1,1))))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN (('0', 0), (1, 1));
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
SET @v = 0;
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((@v, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in (<cache>(((@`v`),0)),<cache>((1,1))))
FLUSH STATUS;
SELECT a, b FROM t1 WHERE (a, b) IN ((@v, 0), (1, 1));
a	b
0	0
1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
CREATE TABLE t4 ( a INT, b INT );
INSERT INTO t4 VALUES (1, 1), (2, 2), (3, 3), (4, 4), (5, 5);
INSERT INTO t4 SELECT a + 5, b + 5 FROM t4;
INSERT INTO t4 SELECT * FROM t4;
INSERT INTO t4 SELECT * FROM t4;
INSERT INTO t4 SELECT * FROM t4;
INSERT INTO t4 SELECT * FROM t4;
INSERT INTO t4 SELECT * FROM t4;
INSERT INTO t4 SELECT * FROM t4;
# Inner table in a nested-loops join
EXPLAIN
SELECT t4.*, t1.a, t1.b
FROM t4 JOIN t1 USING(a, b)
WHERE (t4.a, t4.b) IN ((1, 1), (0, 0));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t4	NULL	ALL	NULL	NULL	NULL	NULL	640	2.00	Using where
1	SIMPLE	t1	NULL	ref	x	x	10	test.t4.a,test.t4.b	410	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t4`.`a` AS `a`,`test`.`t4`.`b` AS `b`,`test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t4` join `test`.`t1` where ((`test`.`t1`.`b` = `test`.`t4`.`b`) and (`test`.`t1`.`a` = `test`.`t4`.`a`) and ((`test`.`t4`.`a`,`test`.`t4`.`b`) in (<cache>((1,1)),<cache>((0,0)))))
# Join on IN
EXPLAIN
SELECT t4.*, t1.a, t1.b
FROM t4 JOIN t1
WHERE (t1.a, t1.b) IN ((t4.a, t4.b), (0, 0));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t4	NULL	ALL	NULL	NULL	NULL	NULL	640	100.00	NULL
1	SIMPLE	t1	NULL	index	x	x	10	NULL	4098	2.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t4`.`a` AS `a`,`test`.`t4`.`b` AS `b`,`test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t4` join `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in ((`test`.`t4`.`a`,`test`.`t4`.`b`),<cache>((0,0))))
EXPLAIN
SELECT t4.*, t1.a, t1.b
FROM t4 JOIN t1
WHERE (t1.a, t1.b) IN ((t4.a, t4.b), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t4	NULL	ALL	NULL	NULL	NULL	NULL	640	100.00	NULL
1	SIMPLE	t1	NULL	index	x	x	10	NULL	4098	2.00	Using where; Using index; Using join buffer (Block Nested Loop)
Warnings:
Note	1003	/* select#1 */ select `test`.`t4`.`a` AS `a`,`test`.`t4`.`b` AS `b`,`test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t4` join `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in ((`test`.`t4`.`a`,`test`.`t4`.`b`),<cache>((1,1))))
#
# Tests for non-deterministic functions.
#
CREATE FUNCTION f1() RETURNS INT NOT DETERMINISTIC RETURN 1;
# The statement immediately below should not use range access.
EXPLAIN SELECT a, b FROM t1 WHERE (a, b, c) IN ((0, 0, 0), (f1(), 1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	x	NULL	NULL	NULL	4098	0.20	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`,`test`.`t1`.`c`) in (<cache>((0,0,0)),(`f1`(),1,1)))
EXPLAIN SELECT a, b FROM t1 WHERE (a, b, c) IN ((0, 0, 0), (1, f1(), 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	20.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`,`test`.`t1`.`c`) in (<cache>((0,0,0)),(1,`f1`(),1)))
EXPLAIN SELECT a, b FROM t1 WHERE (a, b, c) IN ((0, 0, 0), (1, 1, f1()));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	10	NULL	2	20.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`,`test`.`t1`.`c`) in (<cache>((0,0,0)),(1,1,`f1`())))
# The statement immediately below should not use range access.
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((f1(), 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	x	x	10	NULL	4098	1.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 1) and (`test`.`t1`.`a` = `f1`()))
DROP FUNCTION f1;
# The statement immediately below should not use range access.
EXPLAIN
SELECT a, b
FROM t1 AS t1o
WHERE EXISTS (SELECT /*+ NO_SEMIJOIN() */ 1
FROM t1
WHERE (a, b) IN ((t1o.a, t1o.b)) );
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	PRIMARY	t1o	NULL	index	NULL	x	10	NULL	4098	100.00	Using where; Using index
2	DEPENDENT SUBQUERY	t1	NULL	ref	x	x	10	test.t1o.a,test.t1o.b	410	100.00	Using index
Warnings:
Note	1276	Field or reference 'test.t1o.a' of SELECT #2 was resolved in SELECT #1
Note	1276	Field or reference 'test.t1o.b' of SELECT #2 was resolved in SELECT #1
Note	1003	/* select#1 */ select /*+ NO_SEMIJOIN(@`select#2`) */ `test`.`t1o`.`a` AS `a`,`test`.`t1o`.`b` AS `b` from `test`.`t1` `t1o` where exists(/* select#2 */ select 1 from `test`.`t1` where ((`test`.`t1`.`a` = `test`.`t1o`.`a`) and (`test`.`t1`.`b` = `test`.`t1o`.`b`)))
#
# Tests of dynamic range access
#
CREATE TABLE t5 (a int, b int, KEY (a));
INSERT INTO t5 VALUES (1, 1), (2, 1), (3, 1), (4, 1), (5, 1), (6, 1);
CREATE TABLE t6 (a int, b int, KEY (a));
INSERT INTO t6 VALUES (3, 2), (4, 2), (100, 100), (101, 201), (102, 102);
CREATE TABLE t7 (a int, b int, KEY (a, b));
INSERT INTO t7 VALUES (1, 1), (2, 2), (1000, 1000), (1001, 1001), (1002, 1002),
(1003, 1003), (1004, 1004);
EXPLAIN SELECT *
FROM t5 JOIN t6 ON t5.a = t6.a JOIN t7
WHERE t7.a IN (t5.b, t6.b);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t5	NULL	ALL	a	NULL	NULL	NULL	6	100.00	NULL
1	SIMPLE	t6	NULL	ALL	a	NULL	NULL	NULL	5	20.00	Using where; Using join buffer (Block Nested Loop)
1	SIMPLE	t7	NULL	ALL	a	NULL	NULL	NULL	7	28.57	Range checked for each record (index map: 0x1)
Warnings:
Note	1003	/* select#1 */ select `test`.`t5`.`a` AS `a`,`test`.`t5`.`b` AS `b`,`test`.`t6`.`a` AS `a`,`test`.`t6`.`b` AS `b`,`test`.`t7`.`a` AS `a`,`test`.`t7`.`b` AS `b` from `test`.`t5` join `test`.`t6` join `test`.`t7` where ((`test`.`t6`.`a` = `test`.`t5`.`a`) and (`test`.`t7`.`a` in (`test`.`t5`.`b`,`test`.`t6`.`b`)))
FLUSH STATUS;
SELECT *
FROM t5 JOIN t6 ON t5.a = t6.a JOIN t7
WHERE t7.a IN (t5.b, t6.b);
a	b	a	b	a	b
3	1	3	2	1	1
3	1	3	2	2	2
4	1	4	2	1	1
4	1	4	2	2	2
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	4
Handler_read_last	0
Handler_read_next	4
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	13
EXPLAIN SELECT *
FROM t5 JOIN t6 ON t5.a = t6.a JOIN t7
WHERE (t7.a, t7.b) IN ((t5.b, 1), (t6.b, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t5	NULL	ALL	a	NULL	NULL	NULL	6	100.00	NULL
1	SIMPLE	t6	NULL	ALL	a	NULL	NULL	NULL	5	20.00	Using where; Using join buffer (Block Nested Loop)
1	SIMPLE	t7	NULL	ALL	a	NULL	NULL	NULL	7	14.29	Range checked for each record (index map: 0x1)
Warnings:
Note	1003	/* select#1 */ select `test`.`t5`.`a` AS `a`,`test`.`t5`.`b` AS `b`,`test`.`t6`.`a` AS `a`,`test`.`t6`.`b` AS `b`,`test`.`t7`.`a` AS `a`,`test`.`t7`.`b` AS `b` from `test`.`t5` join `test`.`t6` join `test`.`t7` where ((`test`.`t6`.`a` = `test`.`t5`.`a`) and ((`test`.`t7`.`a`,`test`.`t7`.`b`) in ((`test`.`t5`.`b`,1),(`test`.`t6`.`b`,1))))
FLUSH STATUS;
SELECT *
FROM t5 JOIN t6 ON t5.a = t6.a JOIN t7
WHERE (t7.a, t7.b) IN ((t5.b, 1), (t6.b, 1));
a	b	a	b	a	b
3	1	3	2	1	1
4	1	4	2	1	1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	4
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	13
#
# Regression tests of the worklog below.
#
# Make sure we process IN predicates only.
# The code around this is very unclear.
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) != (1, 1);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	x	x	10	NULL	4098	99.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`a` <> 1) or (`test`.`t1`.`b` <> 1))
# This should give us a ref scan, as it always did.
EXPLAIN SELECT a, b FROM t1 WHERE (a, b) IN ((0, 0));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	x	x	10	const,const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`b` = 0) and (`test`.`t1`.`a` = 0))
EXPLAIN SELECT a, b FROM t1 WHERE (a, c) IN ((0, 0));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	x	x	5	const	1	10.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where ((`test`.`t1`.`c` = 0) and (`test`.`t1`.`a` = 0))
# ref scan on x(a).
EXPLAIN SELECT * FROM t1 WHERE (a, c) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	x	x	5	NULL	2	20.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b`,`test`.`t1`.`c` AS `c` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`c`) in (<cache>((0,0)),<cache>((1,1))))
DROP TABLE t1, t2, t3, t4, t5, t6, t7;
#
# Bug#17635476: CRASH IN GET_MM_PARTS() OR ASSERT IN
# GET_FUNC_MM_TREE_FROM_IN_PREDICATE()
#
CREATE TABLE t1 (
a INT,
b INT,
KEY (a)
) ENGINE = INNODB;
SELECT DISTINCT a FROM t1 WHERE (a, b) IN ((0, 0), (1, 1));
a
INSERT INTO t1 VALUES (0, 0), (1, 1), (2, 2), (3, 3), (4, 4), (5, 5), (6, 6),
(7, 7), (8, 8), (9, 9);
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
CREATE TABLE t2 (
a INT,
b INT,
KEY (a, b)
);
INSERT INTO t2 SELECT * FROM t1;
ANALYZE TABLE t2;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	Table is already up to date
EXPLAIN SELECT DISTINCT a FROM t1 WHERE (a, b) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	a	a	5	NULL	2	20.00	Using where
Warnings:
Note	1003	/* select#1 */ select distinct `test`.`t1`.`a` AS `a` from `test`.`t1` where ((`test`.`t1`.`a`,`test`.`t1`.`b`) in (<cache>((0,0)),<cache>((1,1))))
FLUSH STATUS;
SELECT DISTINCT a FROM t1 WHERE (a, b) IN ((0, 0), (1, 1));
a
0
1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
EXPLAIN SELECT DISTINCT a FROM t2 WHERE (a, b) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	range	a	a	10	NULL	2	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select distinct `test`.`t2`.`a` AS `a` from `test`.`t2` where ((`test`.`t2`.`a`,`test`.`t2`.`b`) in (<cache>((0,0)),<cache>((1,1))))
FLUSH STATUS;
SELECT DISTINCT a FROM t2 WHERE (a, b) IN ((0, 0), (1, 1));
a
0
1
SHOW STATUS LIKE 'Handler_read_%';
Variable_name	Value
Handler_read_first	0
Handler_read_key	2
Handler_read_last	0
Handler_read_next	2
Handler_read_prev	0
Handler_read_rnd	0
Handler_read_rnd_next	0
# Should not use range scan.
EXPLAIN SELECT DISTINCT a FROM t1 WHERE (NULL, b) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	a	a	5	NULL	10	20.00	Using where
Warnings:
Note	1003	/* select#1 */ select distinct `test`.`t1`.`a` AS `a` from `test`.`t1` where ((NULL,`test`.`t1`.`b`) in (<cache>((0,0)),<cache>((1,1))))
# Should not use range scan.
EXPLAIN SELECT DISTINCT a FROM t2 WHERE (NULL, b) IN ((0, 0), (1, 1));
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t2	NULL	index	a	a	10	NULL	10	20.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select distinct `test`.`t2`.`a` AS `a` from `test`.`t2` where ((NULL,`test`.`t2`.`b`) in (<cache>((0,0)),<cache>((1,1))))
DROP TABLE t1, t2;
#
# Bug#17755540 VALGRIND ERROR WHEN SETTING UP ROW COMPARATORS
#
CREATE TABLE t2 (a INT, b INT, c INT, d INT, KEY x(a, b));
INSERT INTO t2 VALUES (2, 2, 2, 2), (3, 3, 3, 3), (4, 4, 4, 4), (5, 5, 5, 5),
(6, 6, 6, 6), (7, 7, 7, 7), (8, 8, 8, 8), (9, 9, 9, 9);
INSERT INTO t2 SELECT * FROM t2;
INSERT INTO t2 VALUES (0, 0, 0, 0), (1, 1, 1, 1);
ANALYZE TABLE t2;
Table	Op	Msg_type	Msg_text
test.t2	analyze	status	OK
SELECT a, b FROM t2 WHERE (a, b) IN ((0, 0), (1, 1));
a	b
0	0
1	1
DROP TABLE t2;
#
# BUG#18364815: OPTIMIZER PREFERS TABLE SCAN WHEN 
#               USING "IN" WITH VALUE OF DIFFERENT TYPE
#
CREATE TABLE t1 (a INT PRIMARY KEY, b INT);
INSERT INTO t1 VALUES (1,1), (2,1), (3,1), (4,1), (5,1), (6,1);
EXPLAIN SELECT * FROM t1 WHERE a IN (1, 2);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	2	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` in (1,2))
EXPLAIN SELECT * FROM t1 WHERE a IN (1, "2");
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	4	NULL	2	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`a` AS `a`,`test`.`t1`.`b` AS `b` from `test`.`t1` where (`test`.`t1`.`a` in (1,'2'))
SELECT * FROM t1 WHERE a IN (1, 2);
a	b
1	1
2	1
SELECT * FROM t1 WHERE a IN (1, "2");
a	b
1	1
2	1
DROP TABLE t1;
# 
# Bug#18715670
# CRASH IN DECIMAL_ACTUAL_FRACTION COMPARING DECIMAL TO NULLS
# 
CREATE TABLE t1(n DECIMAL(39,19) NOT NULL, KEY(n)) engine=innodb;
INSERT INTO t1 SET n=0;
SELECT 1 FROM t1 WHERE n NOT IN(NULL, NULL);
1
DROP TABLE t1;
#
# Bug#18759597 MISSING ROWS ON WHERE .. 
#              IN QUERY WITH VARIABLES AND CONCAT
#
CREATE TABLE t1 (
col_varchar_key varchar(2),
KEY col_varchar_key (col_varchar_key)
) ENGINE=InnoDB;
INSERT INTO t1 VALUES ('n'),('xm');
SET @var1 = 't', @var2 = 'him',
@var3 = 'n', @var4 = 'n',
@var5 = 'n', @var6 = 'g',
@var7 = 'b', @var8 = 'o',
@var9 = 'm', @var10 = 'xm', @var11 = 'u'
;
SELECT col_varchar_key AS field1
FROM t1
WHERE ( col_varchar_key, col_varchar_key ) IN (
('m', @var1  ),
('n', @var3  ),
('a', @var5  ),
('l', @var7  ),
(CONCAT('x', @var9 ), @var10 )
);
field1
n
xm
DROP TABLE t1;
#
# Bug#18535226 	DEBUG CRASH ON QUICK_RANGE_SELECT::RESET
#
SET @old_tmp_table_size=@@tmp_table_size;
SET tmp_table_size=1024;
CREATE TABLE t1 (
pk INT NOT NULL,
col_int_key INT,
col_date_key date,
col_date_nokey date,
col_time_key time,
col_time_nokey time,
col_datetime_key datetime,
col_datetime_nokey datetime,
col_varchar_key varchar(1),
col_varchar_nokey varchar(1),
PRIMARY KEY (pk),
KEY col_int_key (col_int_key)
) ENGINE=MyISAM;
INSERT INTO t1 VALUES
(5,0,'2001-05-06','2001-05-06','16:21:18','16:21:18','2001-11-08 21:02:12',
'2001-11-08 21:02:12','x','x'),(6,7,'2006-03-03','2006-03-03','18:56:33',
'18:56:33','2003-04-01 00:00:00','2003-04-01 00:00:00','i','i'),
(7,7,'2007-12-28','2007-12-28',NULL,NULL,'1900-01-01 00:00:00',
'1900-01-01 00:00:00','e','e'),(8,1,'2004-10-20','2004-10-20','09:29:08',
'09:29:08','2007-07-12 00:00:00','2007-07-12 00:00:00','p','p'),
(9,7,'2008-04-09','2008-04-09','19:11:10','19:11:10',
'2005-04-04 01:21:01','2005-04-04 01:21:01','s','s'),
(10,1,'2005-12-25','2005-12-25','11:57:26','11:57:26',
'1900-01-01 00:00:00','1900-01-01 00:00:00','j','j');
SELECT alias1.col_int_key
FROM
( SELECT SQ1_alias1.* FROM t1 AS SQ1_alias1, t1 AS SQ1_alias2 ) AS alias1,
(SELECT 7 AS col_int_nokey) AS alias2
WHERE
alias2.col_int_nokey = alias1.pk
AND alias1.col_varchar_nokey < alias1.col_varchar_key
ORDER BY alias1.col_varchar_key;
col_int_key
DROP TABLE t1;
SET tmp_table_size=@old_tmp_table_size;
SET sql_mode = default;
#
# Bug#19585938 Crash in get_full_func_mm_tree with null
#              item_field->table_ref
#
CREATE TABLE t1(id INTEGER, col1 INTEGER, col2 INTEGER, PRIMARY KEY(id));
INSERT INTO t1 VALUES (1,2,3), (3,2,1);
SELECT (SELECT 1
FROM t1
WHERE SUM(1) < id
) AS c
FROM t1
GROUP BY col1;
c
1
SELECT (SELECT 1
FROM t1
WHERE id > SUM(1)
) AS c
FROM t1
GROUP BY col1;
c
1
SELECT (SELECT 1
FROM t1
WHERE SUM(1) BETWEEN id AND id+1
) AS c
FROM t1
GROUP BY col1;
c
1
SELECT (SELECT 1
FROM t1
WHERE id BETWEEN SUM(1) AND SUM(5)
) AS c
FROM t1
GROUP BY col1;
c
1
SELECT (SELECT 1
FROM t1
WHERE SUM(1) BETWEEN COUNT(*) AND id
) AS c
FROM t1
GROUP BY col1;
c
1
DROP TABLE t1;
#
# Bug#21415791 VALGRIND ERROR (CONDITIONAL JUMP) AT KEY_AND
#              (RANGE_OPT_PARAM*, SEL_ARG*, SEL_AR
#
CREATE TABLE t1 (
col_varchar_10 VARCHAR(10),
pk INTEGER NOT NULL,
col_int_key INTEGER,
PRIMARY KEY (pk),
KEY col_int_key (col_int_key),
KEY col_varchar_10 (col_varchar_10)
) ENGINE=InnoDB;
INSERT INTO t1 (
pk, col_varchar_10, col_int_key) VALUES
(1, 'ttttt', 0), (2, 'zzzzz', 0), (3, 'ggggg', 0),
(4, 'hhhhh', 0), (5, 'kkkkk', 0), (6, 'lllll', 0);
CREATE TABLE t2 (
pk INTEGER NOT NULL,
col_varchar_10 VARCHAR(10),
PRIMARY KEY (pk),
KEY col_varchar_10 (col_varchar_10)
) ENGINE=InnoDB;
INSERT INTO t2 (
pk,  col_varchar_10) VALUES
(1, '00000'), (2, '00000'), (3, '44444'), (4, '00000'),
(5, NULL), (6, NULL), (7, NULL);
SELECT COUNT(t1.col_int_key)
FROM t2 RIGHT OUTER JOIN t1 ON t2.col_varchar_10 <= t1.col_varchar_10
WHERE t2.pk <> 4 OR t2.pk != t1.col_int_key AND t2.pk <> 1000;
COUNT(t1.col_int_key)
24
DROP TABLE t1, t2;
#
# Bug #20229614: OR CONDITIONS ON MULTI-COLUMN INDEX MAY NOT USE ALL
#                INDEX COLUMNS TO FILTER ROWS
#
CREATE TABLE t1 (
c1 INT,
c2 INT,
c3 INT,
PRIMARY KEY(c1, c2, c3)
) ENGINE=INNODB;
INSERT INTO t1 VALUES (1, 1, 1), (1, 1, 2), (1, 1, 3),
(1, 1, 4), (1, 1, 5);
INSERT INTO t1 SELECT c1, 2, c3 FROM t1;
INSERT INTO t1 SELECT c1, 3, c3 FROM t1 WHERE c2 = 1;
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
SELECT COUNT(*) FROM t1;
COUNT(*)
15
EXPLAIN SELECT c1, c2, c3
FROM t1
WHERE (c1 = 1 AND c2 = 1 AND c3 = 1) OR
(c1 = 1 AND c2 = 2 AND c3 = 2) OR
(c1 = 1 AND c2 = 2 AND c3 = 3);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	PRIMARY	PRIMARY	12	NULL	3	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1`,`test`.`t1`.`c2` AS `c2`,`test`.`t1`.`c3` AS `c3` from `test`.`t1` where (((`test`.`t1`.`c3` = 1) and (`test`.`t1`.`c2` = 1) and (`test`.`t1`.`c1` = 1)) or ((`test`.`t1`.`c3` = 2) and (`test`.`t1`.`c2` = 2) and (`test`.`t1`.`c1` = 1)) or ((`test`.`t1`.`c3` = 3) and (`test`.`t1`.`c2` = 2) and (`test`.`t1`.`c1` = 1)))
DROP TABLE t1;
#
# Bug#21139683: ASSERTION FAILED: TYPE_ARG == MAYBE_KEY ||
#               TYPE_ARG == IMPOSSIBLE
#
CREATE TABLE t1 (
a BLOB,
PRIMARY KEY(a(1)),
KEY(a(1))
) ENGINE=INNODB;
SELECT 1 FROM t1 WHERE a <> 'a' OR a <> "";
1
DROP TABLE t1;
#
# Bug#19333852: RESULT DIFF IN QUERY HAVING DISTINCT
#               WITH GROUP BY
#
CREATE TABLE t1 (
v1 VARCHAR(20) CHARACTER SET utf8 NOT NULL,
pk INTEGER NOT NULL,
PRIMARY KEY (pk),
KEY v1_key (v1(10))
) ENGINE=InnoDB;
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
INSERT INTO t1 VALUES ('ABCDE',19), ('JLVGO',14);
EXPLAIN SELECT * FROM t1 WHERE t1.v1 < CHAR(128);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	v1_key	NULL	NULL	NULL	2	50.00	Using where
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
Note	1003	/* select#1 */ select `test`.`t1`.`v1` AS `v1`,`test`.`t1`.`pk` AS `pk` from `test`.`t1` where (`test`.`t1`.`v1` < <cache>(char(128)))
EXPLAIN SELECT * FROM t1 WHERE t1.v1 = CHAR(128);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	no matching row in const table
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
Note	1003	/* select#1 */ select `test`.`t1`.`v1` AS `v1`,`test`.`t1`.`pk` AS `pk` from `test`.`t1` where (`test`.`t1`.`v1` = char(128))
EXPLAIN SELECT * FROM t1 WHERE t1.v1 BETWEEN 'f' AND CHAR(128);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	v1_key	v1_key	32	NULL	1	100.00	Using where
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
Note	1003	/* select#1 */ select `test`.`t1`.`v1` AS `v1`,`test`.`t1`.`pk` AS `pk` from `test`.`t1` where (`test`.`t1`.`v1` between 'f' and <cache>(char(128)))
SELECT * FROM t1 WHERE t1.v1 < CHAR(128);
v1	pk
JLVGO	14
ABCDE	19
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
SELECT * FROM t1 WHERE t1.v1 = CHAR(128);
v1	pk
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
SELECT * FROM t1 WHERE t1.v1 BETWEEN 'f' AND CHAR(128);
v1	pk
JLVGO	14
Warnings:
Warning	1366	Incorrect string value: '\x80' for column 'v1' at row 1
DROP TABLE t1;
#
# Bug #21761867: ASSERTION `TYPE_ARG == MAYBE_KEY ||
#                TYPE_ARG == IMPOSSIBLE' FAILED.
#
CREATE TABLE t1 (
c10 INT NOT NULL,
c12 INT NOT NULL,
c18 INT,
PRIMARY KEY (c10,c12),
UNIQUE KEY key_c12(c12),
KEY key_c18(c18));
INSERT INTO t1 VALUES(11,5,0), (12,6,1), (13,7,2), (14,8,3), (15,9,4);
CREATE TABLE t2 (
c10 INT NOT NULL,
c12 INT NOT NULL,
PRIMARY KEY(c10,c12));
CREATE TABLE t3 (c10 INT NOT NULL);
SELECT t2.c10
FROM t1
RIGHT JOIN t3
LEFT JOIN t2
ON t3.c10 = t2.c10
ON t1.c12 > t2.c12
WHERE
t1.c10 <= 25
AND
t1.c18 IS NOT NULL
OR
t1.c10 > 5
AND
t1.c18 IN (15,16,18);
c10
DROP TABLE t1, t2, t3;
#
# Bug #21318711: WRONG RESULTS FOR TRUNCATED COLUMN AND AGGREGATION
#
CREATE TABLE t1 (
col1 VARCHAR(5),
col2 INT NOT NULL,
PRIMARY KEY (col1, col2)
) ENGINE=InnoDB, CHARSET utf8mb4;
INSERT INTO t1 VALUES ('abcde', 10);
EXPLAIN SELECT MAX(col2) FROM t1 WHERE col1 = 'abcdeaa';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	PRIMARY	PRIMARY	22	const	1	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select max(`test`.`t1`.`col2`) AS `MAX(col2)` from `test`.`t1` where (`test`.`t1`.`col1` = 'abcdeaa')
EXPLAIN SELECT MAX(col2) FROM t1 WHERE col1 = 'abcde  ';
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	Select tables optimized away
Warnings:
Note	1003	/* select#1 */ select max(`test`.`t1`.`col2`) AS `MAX(col2)` from `test`.`t1` where multiple equal('abcde  ', `test`.`t1`.`col1`)
SELECT MAX(col2) FROM t1 WHERE col1 = 'abcdeaa';
MAX(col2)
NULL
SELECT MAX(col2) FROM t1 WHERE col1 = 'abcde  ';
MAX(col2)
10
DROP TABLE t1;
#
# Bug# 22283790: RANGE OPTIMIZER UTILIZES TOO MUCH MEMORY WITH
#                MANY OR CONDITIONS
#
CREATE TABLE t1 (
f1 INTEGER,
KEY (f1)
);
INSERT INTO t1 VALUES (1),(2),(3),(4),(5),(6),(7),(8),(9),(10),(11),(12),(13),(14),(15);
SET @orig_range_optimizer_max_mem_size= @@range_optimizer_max_mem_size;
SET range_optimizer_max_mem_size= 5000;
EXPLAIN SELECT * FROM t1 WHERE f1=1 OR f1=2 OR f1=3 OR f1=4 OR f1=5
OR f1=6 OR f1=7 OR f1=8 OR f1=9 OR f1=10 OR f1=11;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	range	f1	f1	5	NULL	11	100.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`f1` AS `f1` from `test`.`t1` where ((`test`.`t1`.`f1` = 1) or (`test`.`t1`.`f1` = 2) or (`test`.`t1`.`f1` = 3) or (`test`.`t1`.`f1` = 4) or (`test`.`t1`.`f1` = 5) or (`test`.`t1`.`f1` = 6) or (`test`.`t1`.`f1` = 7) or (`test`.`t1`.`f1` = 8) or (`test`.`t1`.`f1` = 9) or (`test`.`t1`.`f1` = 10) or (`test`.`t1`.`f1` = 11))
SET range_optimizer_max_mem_size= @orig_range_optimizer_max_mem_size;
DROP TABLE t1;
#
# Bug #23623110: REFACTOR USE_COUNT IN THE RANGE OPTIMIZER
#
# Tests deleting nodes in tree_delete() not from the end of the
# linked list.
#
CREATE TABLE t1 (
pk INTEGER,
PRIMARY KEY (pk)
);
SELECT * FROM t1 WHERE pk IN (3, 8) OR pk NOT IN (2);
pk
DROP TABLE t1;
#
# Bug #23623110: REFACTOR USE_COUNT IN THE RANGE OPTIMIZER
#
# Tests deleting nodes in tree_delete() not from the end of the
# linked list.
#
# Indirectly tests ORing with a tree that has a nonzero refcount,
# where nodes are also being skipped over. (There was a bug in
# refcounting such trees earlier.)
#
CREATE TABLE t1 (
col_int_key int,
pk int NOT NULL,
col_int int,
KEY test_idx (pk,col_int_key,col_int)
);
SELECT * FROM t1 WHERE
(col_int_key >= 6 AND pk > 6) OR
(pk > 2 AND col_int_key = 7 AND col_int > 6);
col_int_key	pk	col_int
DROP TABLE t1;
#
#
# Bug #23259872: OPTIMIZER CHOOSES TO USE NON PRIMARY
#                INDEX, EVEN THOUGH COST IS HIGHER
#
CREATE TABLE `giant_table` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`one_id` int(11) NOT NULL,
`other_id` bigint(20) NOT NULL DEFAULT '0',
`some_other_id` int(11) DEFAULT 0 NOT NULL,
`something` double NOT NULL DEFAULT '0',
`comment` text COLLATE utf8_unicode_ci,
`flags` int(11) NOT NULL DEFAULT '0',
`time_created` int(11) NOT NULL DEFAULT '0',
PRIMARY KEY (`id`),
KEY `time_created` (`time_created`),
KEY `some_other_id` (`some_other_id`),
KEY `one_other_idx` (`one_id`,`other_id`),
KEY `other_id` (`other_id`,`time_created`)
) ENGINE=InnoDB AUTO_INCREMENT=101651329
DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci ;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	3778	'utf8_unicode_ci' is a collation of the deprecated character set UTF8MB3. Please consider using UTF8MB4 with an appropriate collation instead.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3778	'utf8_unicode_ci' is a collation of the deprecated character set UTF8MB3. Please consider using UTF8MB4 with an appropriate collation instead.
CREATE TABLE t1 (c1 INT);
INSERT INTO t1 VALUES (66136540), (68983250), (89627210), (77869520),
(82543190), (67538270), (77282760), (77908170),
(70923370), (68066360);
CREATE PROCEDURE p()
BEGIN
SET @x = 1;
REPEAT
INSERT INTO giant_table(id,one_id)
SELECT c1 + @x, 0
FROM t1
WHERE c1 IN (66136540, 68985250, 89627210, 77869520 , 82543190, 67538270,
77282760, 77908170, 70923370, 68066360);
SET @x =  @x + 1;
UNTIL @x > 30 END REPEAT;
END $
CALL p();
SELECT count(*) FROM giant_table;
count(*)
270
INSERT INTO giant_table (id,one_id) VALUES (66136539, 0), (68983258,1),
(89628210,1), (77869520,2);
INSERT INTO giant_table (id,one_id, some_other_id) VALUES(84673401, 0, 1),
(61069031, 1, 1);
EXPLAIN SELECT id, something, comment, time_created, one_id, other_id,
some_other_id, flags
FROM giant_table
WHERE id IN (66136539, 68983258, 89628210, 77869520, 82543198, 67538272,
84673401, 61069031, 68214385, 77282865, 76991297, 64569216,
89481638, 74534074, 70396537, 80076375, 63308530, 77908270,
70923271, 68066180)
AND (giant_table.flags & 0x01) = 0 AND giant_table.some_other_id = 0;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	giant_table	NULL	range	PRIMARY,some_other_id	some_other_id	8	NULL	20	100.00	Using where; Using MRR
Warnings:
Note	1003	/* select#1 */ select `test`.`giant_table`.`id` AS `id`,`test`.`giant_table`.`something` AS `something`,`test`.`giant_table`.`comment` AS `comment`,`test`.`giant_table`.`time_created` AS `time_created`,`test`.`giant_table`.`one_id` AS `one_id`,`test`.`giant_table`.`other_id` AS `other_id`,`test`.`giant_table`.`some_other_id` AS `some_other_id`,`test`.`giant_table`.`flags` AS `flags` from `test`.`giant_table` where ((`test`.`giant_table`.`some_other_id` = 0) and (`test`.`giant_table`.`id` in (66136539,68983258,89628210,77869520,82543198,67538272,84673401,61069031,68214385,77282865,76991297,64569216,89481638,74534074,70396537,80076375,63308530,77908270,70923271,68066180)) and ((`test`.`giant_table`.`flags` & 0x01) = 0))
DROP PROCEDURE p;
DROP TABLE giant_table, t1;
#
# Bug#22671573: SIG11 IN SEL_ARG::RB_INSERT |SQL/OPT_RANGE.CC
#
# Tests creating an empty tree (impossible condition) and then ANDing with it.
#
CREATE TABLE t1 (
a INT,
b INT,
KEY test_idx (b, a)
);
SELECT * FROM t1 WHERE b BETWEEN 8 AND 8 AND a > 8 AND a <= 8;
a	b
DROP TABLE t1;
#
# Indirectly tests inserting a node into an empty (impossible) tree.
#
CREATE TABLE t1 (
pk INT,
PRIMARY KEY ( pk )
);
SELECT * FROM t1 WHERE pk = 6 OR pk > 6;
pk
DROP TABLE t1;
#
# Indirectly tests ORing with an empty (impossible) tree.
#
CREATE TABLE t1 (
col_int_key INT,
KEY (col_int_key)
);
SELECT * FROM t1 WHERE col_int_key IS NULL OR col_int_key < 9 OR col_int_key = 9;
col_int_key
DROP TABLE t1;
#
# Indirectly tests deleting the last node from a tree
# (which makes it IMPOSSIBLE) and then inserting more than one node.
#
CREATE TABLE t1 (
a VARCHAR(64),
KEY a (a)
);
SELECT * FROM t1 WHERE a IS NULL OR a NOT IN ( 'foo', 'bar' );
a
DROP TABLE t1;
#
# Bug#25229315: ASSERTION TABLE->M_RECORD_BUFFER.RECORD_SIZE() ==
#               RECORD_PREFIX_SIZE(TAB)' FAIL
#
CREATE TABLE t1 (pk INT PRIMARY KEY, vc VARCHAR(1)) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1, NULL), (2, 'w');
CREATE TABLE t2 (
i INT,
vc VARCHAR(1),
pk INT PRIMARY KEY,
KEY (i),
KEY (vc)
) ENGINE=InnoDB;
INSERT INTO t2 VALUES (1, 'p', 1), (9, 'w', 2), (NULL, 'r', 3);
ANALYZE TABLE t1, t2;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
test.t2	analyze	status	OK
EXPLAIN SELECT MIN(t1.pk) FROM t1, t2 WHERE t2.vc = t1.vc OR t2.i = t1.pk;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ALL	PRIMARY	NULL	NULL	NULL	2	100.00	NULL
1	SIMPLE	t2	NULL	ALL	i,vc	NULL	NULL	NULL	3	55.56	Range checked for each record (index map: 0x6)
Warnings:
Note	1003	/* select#1 */ select min(`test`.`t1`.`pk`) AS `MIN(t1.pk)` from `test`.`t1` join `test`.`t2` where ((`test`.`t2`.`vc` = `test`.`t1`.`vc`) or (`test`.`t2`.`i` = `test`.`t1`.`pk`))
SELECT MIN(t1.pk) FROM t1, t2 WHERE t2.vc = t1.vc OR t2.i = t1.pk;
MIN(t1.pk)
1
DROP TABLE t1, t2;
#
# Bug #26727773: OPTIMIZER CHOSES COMPOSITE INDEX FOR REF OVER RANGE
#
CREATE TABLE transactions (
app_trans_id INT DEFAULT NULL,
id INT NOT NULL,
tbl INT NOT NULL DEFAULT 1,
created TIMESTAMP NOT NULL DEFAULT '2017-01-01 01:01:01',
trans_type INT NOT NULL,
description BLOB,
source_lvl1 INT DEFAULT NULL,
source_lvl2 INT DEFAULT NULL,
KEY tbl_id_idx (tbl,id),
KEY created_idx (created),
KEY trans_type_created_idx (trans_type,created),
KEY app_trans_id_idx (app_trans_id)
) ENGINE=INNODB ;
CREATE TABLE t1 (c1 INT);
INSERT INTO t1 VALUES (1), (1000), (2000), (3000), (4000), (5000), (6000),
(7000), (8000), (9000);
CREATE PROCEDURE p()
BEGIN
SET @x = 1;
REPEAT
INSERT IGNORE INTO transactions(id,trans_type, description)
SELECT c1 + @x, @x , 'abcd'
  FROM t1;
SET @x =  @x + 1;
UNTIL @x > 300 END REPEAT;
END $
CALL p();
SELECT count(*) FROM transactions;
count(*)
3000
INSERT IGNORE INTO transactions(id,trans_type, description, created)
SELECT 3, 3 , 'abcd', '2018-01-01 01:01:01'
  FROM dual;
EXPLAIN SELECT '2017-10-23 01:01:01', HOUR(created), source_lvl1, source_lvl2,
COUNT(DISTINCT(app_trans_id))
FROM transactions
WHERE created > '2017-10-23 01:01:01' AND tbl = 1 AND trans_type in (3)
GROUP BY '2017-10-23 01:01:01', HOUR(created), source_lvl1, source_lvl2;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	transactions	NULL	range	tbl_id_idx,created_idx,trans_type_created_idx	created_idx	4	NULL	#	#	Using where; Using MRR; Using filesort
Warnings:
Note	1003	/* select#1 */ select '2017-10-23 01:01:01' AS `2017-10-23 01:01:01`,hour(`test`.`transactions`.`created`) AS `HOUR(created)`,`test`.`transactions`.`source_lvl1` AS `source_lvl1`,`test`.`transactions`.`source_lvl2` AS `source_lvl2`,count(distinct `test`.`transactions`.`app_trans_id`) AS `COUNT(DISTINCT(app_trans_id))` from `test`.`transactions` where ((`test`.`transactions`.`trans_type` = 3) and (`test`.`transactions`.`tbl` = 1) and (`test`.`transactions`.`created` > TIMESTAMP'2017-10-23 01:01:01')) group by '2017-10-23 01:01:01',hour(`test`.`transactions`.`created`),`test`.`transactions`.`source_lvl1`,`test`.`transactions`.`source_lvl2`
SET optimizer_trace="enabled=on";
SELECT '2017-10-23 01:01:01', HOUR(created), source_lvl1, source_lvl2,
COUNT(DISTINCT(app_trans_id))
FROM transactions
WHERE created > '2017-10-23 01:01:01' AND tbl = 1 AND trans_type in (3)
GROUP BY '2017-10-23 01:01:01', HOUR(created), source_lvl1, source_lvl2;
2017-10-23 01:01:01	HOUR(created)	source_lvl1	source_lvl2	COUNT(DISTINCT(app_trans_id))
2017-10-23 01:01:01	1	NULL	NULL	0
SELECT TRACE INTO @trace FROM INFORMATION_SCHEMA.OPTIMIZER_TRACE;
SELECT @trace RLIKE "range_uses_more_keyparts";
@trace RLIKE "range_uses_more_keyparts"
1
SET optimizer_trace="enabled=off";
DROP PROCEDURE p;
DROP TABLE t1, transactions;
#
# Bug #28086754: OPTIMIZER SKIP THE RANG SCAN ON SECOND COLUMN IN A
#                 COMPOSITE INDEX
#
CREATE TABLE test_ref (
a INT PRIMARY KEY,
b VARCHAR(20),
c VARCHAR(20) DEFAULT NULL,
d VARCHAR(3) DEFAULT NULL,
id INT DEFAULT NULL,
KEY idx1 (id, c),
KEY idx2 (id, d)) ENGINE=INNODB ;
ANALYZE TABLE t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	Error	Table 'test.t1' doesn't exist
test.t1	analyze	status	Operation failed
EXPLAIN SELECT *
FROM test_ref
WHERE id=3 AND c LIKE 'gh%'
ORDER BY c
LIMIT 1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	test_ref	NULL	range	idx1,idx2	idx1	88	NULL	25	100.00	Using where
Warnings:
Note	1003	/* select#1 */ select `test`.`test_ref`.`a` AS `a`,`test`.`test_ref`.`b` AS `b`,`test`.`test_ref`.`c` AS `c`,`test`.`test_ref`.`d` AS `d`,`test`.`test_ref`.`id` AS `id` from `test`.`test_ref` where ((`test`.`test_ref`.`id` = 3) and (`test`.`test_ref`.`c` like 'gh%')) order by `test`.`test_ref`.`c` limit 1
SELECT *
FROM test_ref
WHERE id=3 AND c LIKE 'gh%'
ORDER BY c
LIMIT 1;
a	b	c	d	id
34876	D003	gheennse	S	3
EXPLAIN SELECT *
FROM test_ref
WHERE id=3 AND c LIKE 'gh%'
ORDER BY c DESC
LIMIT 1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	test_ref	NULL	range	idx1,idx2	idx1	88	NULL	25	100.00	Using where; Backward index scan
Warnings:
Note	1003	/* select#1 */ select `test`.`test_ref`.`a` AS `a`,`test`.`test_ref`.`b` AS `b`,`test`.`test_ref`.`c` AS `c`,`test`.`test_ref`.`d` AS `d`,`test`.`test_ref`.`id` AS `id` from `test`.`test_ref` where ((`test`.`test_ref`.`id` = 3) and (`test`.`test_ref`.`c` like 'gh%')) order by `test`.`test_ref`.`c` desc limit 1
SELECT *
FROM test_ref
WHERE id=3 AND c LIKE 'gh%'
ORDER BY c DESC
LIMIT 1;
a	b	c	d	id
1770649	D003	gheennse	S	3
DROP TABLE test_ref;
set optimizer_switch=default;