用于EagleEye3.0 规则集漏报和误报测试的示例项目,项目收集于github和gitee
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1585 lines
54 KiB

# Copyright (c) 2006, 2019, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License, version 2.0,
# as published by the Free Software Foundation.
#
# This program is also distributed with certain software (including
# but not limited to OpenSSL) that is licensed under separate terms,
# as designated in a particular file or component or in included license
# documentation. The authors of MySQL hereby grant you an additional
# permission to link the program and your derivative works with the
# separately licensed software that they have included with MySQL.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License, version 2.0, for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
MESSAGE(STATUS "Running cmake version ${CMAKE_VERSION}")
IF(WIN32)
# CMake 3.8.0 is needed for Visual Studio 2017 and x64 toolset.
CMAKE_MINIMUM_REQUIRED(VERSION 3.8.0)
ELSEIF(APPLE)
# Version 3.12.4 is needed because the new build system of Xcode is not
# supported by cmake. 3.12.4 will force using the legacy build system.
# Version 3.9.2 is needed because INCLUDE_DIRECTORIES(SYSTEM ...) wasn't
# handled properly by the cmake Xcode generator.
IF(CMAKE_GENERATOR STREQUAL "Xcode")
CMAKE_MINIMUM_REQUIRED(VERSION 3.12.4)
ELSE()
CMAKE_MINIMUM_REQUIRED(VERSION 3.9.2)
ENDIF()
ELSEIF(UNIX)
# This is currently minimum version on all supported platforms.
IF(CMAKE_VERSION VERSION_LESS 3.5.1)
# Default cmake is 2.8.12.2 on RedHat
IF(EXISTS "/etc/redhat-release")
MESSAGE(WARNING "Please use cmake3 rather than cmake on this platform")
FIND_PROGRAM(MY_CMAKE3 cmake3 /bin /usr/bin /usr/local/bin)
IF(MY_CMAKE3)
MESSAGE(STATUS "Found ${MY_CMAKE3}")
ELSE()
MESSAGE(STATUS "Please install cmake3 (yum install cmake3)")
ENDIF()
ELSE()
# On SunOS /opt/csw/bin/cmake is (most likely) too old.
FIND_PROGRAM(MY_UNAME uname /bin /usr/bin /usr/local/bin /sbin)
IF(MY_UNAME)
EXEC_PROGRAM(uname ARGS -s OUTPUT_VARIABLE MY_HOST_SYSTEM_NAME)
IF(MY_HOST_SYSTEM_NAME MATCHES "SunOS")
FIND_PROGRAM(MY_CMAKE cmake /usr/bin
NO_CMAKE_ENVIRONMENT_PATH
NO_SYSTEM_ENVIRONMENT_PATH
)
IF(MY_CMAKE)
MESSAGE(STATUS "Found ${MY_CMAKE}")
EXEC_PROGRAM(${MY_CMAKE} ARGS --version)
ELSE()
MESSAGE(STATUS "Please install /usr/bin/cmake ")
ENDIF()
ENDIF()
ENDIF()
ENDIF()
ENDIF()
ENDIF()
# CMake 3.5 is needed for TARGET_SOURCES(... $<TARGET_OBJECTS:${LIB}_objlib>)
CMAKE_MINIMUM_REQUIRED(VERSION 3.5.1)
# Explicitly set CMP0018 and CMP0022 = NEW since newer versions of
# CMake has OLD as default even if OLD is deprecated.
# See cmake --help-policy CMP0018 / CMP0022
CMAKE_POLICY(SET CMP0018 NEW)
CMAKE_POLICY(SET CMP0022 NEW)
# Include TARGET_OBJECTS expressions.
CMAKE_POLICY(SET CMP0051 NEW)
# Disallow use of the LOCATION property for build targets.
IF(POLICY CMP0026)
CMAKE_POLICY(SET CMP0026 NEW)
ENDIF()
# In CMake 3.12 and above, the
#
# * ``check_include_file`` macro in the ``CheckIncludeFile`` module, the
# * ``check_include_file_cxx`` macro in the
# ``CheckIncludeFileCXX`` module, and the
# * ``check_include_files`` macro in the ``CheckIncludeFiles`` module
#
# now prefer to link the check executable to the libraries listed in the
# ``CMAKE_REQUIRED_LIBRARIES`` variable.
IF(POLICY CMP0075)
CMAKE_POLICY(SET CMP0075 OLD)
ENDIF()
# Will set GIT_EXECUTABLE and GIT_FOUND
FIND_PACKAGE(Git)
SET(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_SOURCE_DIR}/cmake)
# First, decide about build type (debug or release)
# If cmake is invoked with -DCMAKE_BUILD_TYPE,
# respect user wishes and do not (re)define CMAKE_BUILD_TYPE. If WITH_DEBUG
# is given, set CMAKE_BUILD_TYPE = Debug. Otherwise, use Relwithdebinfo.
IF(DEFINED CMAKE_BUILD_TYPE)
SET(HAVE_CMAKE_BUILD_TYPE TRUE)
ENDIF()
OPTION(WITH_DEBUG "Use dbug/safemutex" OFF)
OPTION(CHECK_ERRMSG_FORMAT "Check printf format for English error messages" OFF)
# Use a default manufacturer if no manufacturer was identified.
SET(MANUFACTURER_DOCSTRING
"Set the entity that appears as the manufacturer of packages that support a manufacturer field.")
IF(NOT DEFINED MANUFACTURER)
SET(MANUFACTURER "Built from Source" CACHE STRING ${MANUFACTURER_DOCSTRING})
MARK_AS_ADVANCED(MANUFACTURER)
ENDIF()
# MAX_INDEXES - Set the maximum number of indexes per table, default 64U
IF (NOT MAX_INDEXES)
SET(MAX_INDEXES 64U)
ELSEIF(MAX_INDEXES MATCHES "^[0-9]+[Uu]?$")
# MAX_INDEXES should be unsigned, so add the U suffix if it's missing.
STRING(REGEX REPLACE "^([0-9]+).*$" "\\1U" MAX_INDEXES "${MAX_INDEXES}")
MESSAGE(STATUS "Configuring with MAX_INDEXES = ${MAX_INDEXES}")
ELSE()
MESSAGE(FATAL_ERROR "MAX_INDEXES should be an unsigned integer.")
ENDIF(NOT MAX_INDEXES)
IF(MAX_INDEXES GREATER 255)
MESSAGE(FATAL_ERROR "MAX_INDEXES values greater than 255 is not supported!")
ELSEIF(MAX_INDEXES LESS 64)
# Per documentation, ignore values less than 64 and use the default instead.
MESSAGE(WARNING "MAX_INDEXES option ignored because it is less than 64.")
SET(MAX_INDEXES 64U)
ENDIF()
# We choose to provide WITH_DEBUG as alias to standard CMAKE_BUILD_TYPE=Debug
# which turns out to be not trivial, as this involves synchronization
# between CMAKE_BUILD_TYPE and WITH_DEBUG. Besides, we have to deal with cases
# where WITH_DEBUG is reset from ON to OFF and here we need to reset
# CMAKE_BUILD_TYPE to either none or default RelWithDebInfo
SET(BUILDTYPE_DOCSTRING
"Choose the type of build, options are: None(CMAKE_CXX_FLAGS or
CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel")
IF(WITH_DEBUG)
SET(CMAKE_BUILD_TYPE "Debug" CACHE STRING ${BUILDTYPE_DOCSTRING} FORCE)
SET(OLD_WITH_DEBUG 1 CACHE INTERNAL "" FORCE)
ELSEIF(NOT HAVE_CMAKE_BUILD_TYPE OR OLD_WITH_DEBUG)
IF(CMAKE_BUILD_TYPE MATCHES "Debug" OR NOT HAVE_CMAKE_BUILD_TYPE)
SET(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING
${BUILDTYPE_DOCSTRING} FORCE)
ENDIF()
SET(OLD_WITH_DEBUG 0 CACHE INTERNAL "" FORCE)
ENDIF()
STRING(TOUPPER "${CMAKE_BUILD_TYPE}" CMAKE_BUILD_TYPE_UPPER)
IF(CMAKE_GENERATOR MATCHES "Visual Studio [1-9][0-9].*" AND
CMAKE_GENERATOR_TOOLSET STREQUAL "")
# Switch to 64 bit toolset on Windows (32 bit is default).
# This is recommended as the 32 bit linker will run into address space issues
# and not exit for long time.
SET(CMAKE_GENERATOR_TOOLSET "host=x64")
ENDIF()
# On Linux el6/el7 the default gcc is too old, see if devtoolset is installed.
# Same with SLES 12, look for gcc 7 there.
# We need to look for gcc before calling PROJECT below.
OPTION(FORCE_UNSUPPORTED_COMPILER "Disable compiler version checks" OFF)
MARK_AS_ADVANCED(WITHOUT_SERVER FORCE_UNSUPPORTED_COMPILER)
# Use 'uname -r' and 'rpm -qf /' to figure out host system.
# For Docker images we cannot trust uname, so use rpm instead.
IF(UNIX)
FIND_PROGRAM(MY_UNAME uname /bin /usr/bin /usr/local/bin /sbin)
IF(MY_UNAME)
EXECUTE_PROCESS(COMMAND ${MY_UNAME} -s
OUTPUT_VARIABLE MY_HOST_SYSTEM_NAME
OUTPUT_STRIP_TRAILING_WHITESPACE
RESULT_VARIABLE MY_UNAME_RESULT
)
ENDIF()
FIND_PROGRAM(MY_RPM rpm /bin /usr/bin)
IF(MY_RPM)
EXECUTE_PROCESS(COMMAND ${MY_RPM} -qf /
OUTPUT_VARIABLE MY_HOST_FILESYSTEM_NAME
OUTPUT_STRIP_TRAILING_WHITESPACE
RESULT_VARIABLE MY_RPM_RESULT
)
ENDIF()
ENDIF()
IF(CMAKE_HOST_UNIX AND NOT FORCE_UNSUPPORTED_COMPILER
AND NOT CMAKE_C_COMPILER AND NOT CMAKE_CXX_COMPILER)
# Cannot INCLUDE(CMakeDetermineSystem) prior to PROJECT initialization below.
SET (ENV_CC "$ENV{CC}")
SET (ENV_CXX "$ENV{CXX}")
IF (ENV_CC STREQUAL "" AND ENV_CXX STREQUAL "")
IF(MY_UNAME)
EXEC_PROGRAM(${MY_UNAME} ARGS -r OUTPUT_VARIABLE MY_HOST_SYSTEM_VERSION)
IF(MY_HOST_SYSTEM_NAME MATCHES "Linux" AND
(MY_HOST_SYSTEM_VERSION MATCHES "\\.el[67](uek)?\\.")
OR
(MY_HOST_FILESYSTEM_NAME MATCHES "\\.el[67]\\."))
MESSAGE(STATUS
"This is el6 or el7 as found from 'uname -r' or 'rpm -qf /'")
MESSAGE(STATUS "We probably need some devtoolset compiler")
FIND_PROGRAM(ALTERNATIVE_GCC gcc
NO_DEFAULT_PATH
PATHS "/opt/rh/devtoolset-8/root/usr/bin")
FIND_PROGRAM(ALTERNATIVE_GPP g++
NO_DEFAULT_PATH
PATHS "/opt/rh/devtoolset-8/root/usr/bin")
FIND_PROGRAM(ALTERNATIVE_ENABLE enable
NO_DEFAULT_PATH
PATHS "/opt/rh/devtoolset-8/")
IF(ALTERNATIVE_GCC AND ALTERNATIVE_GPP)
SET(CMAKE_C_COMPILER ${ALTERNATIVE_GCC})
SET(CMAKE_CXX_COMPILER ${ALTERNATIVE_GPP})
MESSAGE(STATUS "Using ${ALTERNATIVE_GCC}")
MESSAGE(STATUS "Using ${ALTERNATIVE_GPP}")
ELSE()
MESSAGE(WARNING "Could not find devtoolset gcc")
ENDIF()
ELSEIF(MY_HOST_SYSTEM_NAME MATCHES "Linux" AND
EXISTS "/etc/os-release")
FILE(READ "/etc/os-release" MY_OS_RELEASE)
IF (MY_OS_RELEASE MATCHES "SUSE Linux Enterprise Server 12")
MESSAGE(STATUS "We need to look for a newer GCC on SLES 12")
FIND_PROGRAM(ALTERNATIVE_GCC gcc-7
NO_DEFAULT_PATH
PATHS "/usr/bin")
FIND_PROGRAM(ALTERNATIVE_GPP g++-7
NO_DEFAULT_PATH
PATHS "/usr/bin")
IF (ALTERNATIVE_GCC AND ALTERNATIVE_GPP)
SET(CMAKE_C_COMPILER ${ALTERNATIVE_GCC})
SET(CMAKE_CXX_COMPILER ${ALTERNATIVE_GPP})
MESSAGE(STATUS "Using ${ALTERNATIVE_GCC}")
MESSAGE(STATUS "Using ${ALTERNATIVE_GPP}")
# Use the new ABI so that std::string can be used with allocators
# that are not default-constructible (e.g. Memroot_allocator)
ADD_DEFINITIONS(-D_GLIBCXX_USE_CXX11_ABI=1)
ELSE()
MESSAGE(WARNING "Could not find newer gcc")
ENDIF()
ENDIF()
ENDIF()
ENDIF()
ENDIF()
ENDIF()
# Optionally set project name, e.g.
# foo.xcodeproj (mac) or foo.sln (windows)
SET(MYSQL_PROJECT_NAME_DOCSTRING "MySQL project name")
IF(DEFINED MYSQL_PROJECT_NAME)
SET(MYSQL_PROJECT_NAME ${MYSQL_PROJECT_NAME} CACHE STRING
${MYSQL_PROJECT_NAME_DOCSTRING} FORCE)
ELSE()
SET(MYSQL_PROJECT_NAME "MySQL" CACHE STRING
${MYSQL_PROJECT_NAME_DOCSTRING} FORCE)
MARK_AS_ADVANCED(MYSQL_PROJECT_NAME)
ENDIF()
# Remember if WITH_NDBCLUSTER was specified by user
IF(DEFINED WITH_NDBCLUSTER)
SET(HAVE_WITH_NDBCLUSTER 1)
ENDIF()
OPTION(WITH_NDBCLUSTER "Build MySQL Cluster" OFF)
OPTION(WITH_NDBCLUSTER_STORAGE_ENGINE
"Legacy and deprecated alias for WITH_NDBCLUSTER" OFF)
OPTION(WITH_PLUGIN_NDBCLUSTER
"Legacy and deprecated alias for WITH_NDBCLUSTER" OFF)
MARK_AS_ADVANCED(WITH_NDBCLUSTER_STORAGE_ENGINE WITH_PLUGIN_NDBCLUSTER)
IF(NOT HAVE_WITH_NDBCLUSTER)
# Unless user has used WITH_NDBCLUSTER also look at
# some of the legacy variables
IF(WITH_PLUGIN_NDBCLUSTER)
MESSAGE(WARNING "WITH_PLUGIN_NDBCLUSTER is deprecated and will be "
"removed in a future release. Please use WITH_NDBCLUSTER instead.")
SET(WITH_NDBCLUSTER ON)
ENDIF()
IF(WITH_NDBCLUSTER_STORAGE_ENGINE)
MESSAGE(WARNING "WITH_NDBCLUSTER_STORAGE_ENGINE is deprecated and "
"will be removed in a future release. Please use WITH_NDBCLUSTER "
"instead.")
SET(WITH_NDBCLUSTER ON)
ENDIF()
ENDIF()
IF(WITH_NDBCLUSTER)
MESSAGE(STATUS "Building MySQL Cluster")
ENDIF()
INCLUDE(mysql_version)
IF(POLICY CMP0048)
CMAKE_POLICY(SET CMP0048 NEW)
PROJECT(${MYSQL_PROJECT_NAME}
VERSION ${MAJOR_VERSION}.${MINOR_VERSION}.${PATCH_VERSION})
ELSE()
PROJECT(${MYSQL_PROJECT_NAME})
ENDIF()
GET_FILENAME_COMPONENT(REALPATH_CMAKE_SOURCE_DIR ${CMAKE_SOURCE_DIR} REALPATH)
GET_FILENAME_COMPONENT(REALPATH_CMAKE_BINARY_DIR ${CMAKE_BINARY_DIR} REALPATH)
MESSAGE(STATUS "Source directory ${REALPATH_CMAKE_SOURCE_DIR}")
MESSAGE(STATUS "Binary directory ${REALPATH_CMAKE_BINARY_DIR}")
# IN PB2 we have a few configurations which are built in-source (e.g. doxygen).
IF(DEFINED ENV{PB2WORKDIR})
OPTION(FORCE_INSOURCE_BUILD "Allow in-source build" ON)
ELSE()
OPTION(FORCE_INSOURCE_BUILD "Allow in-source build" OFF)
ENDIF()
# https://gitlab.kitware.com/cmake/community/wikis/FAQ
# cmake-does-not-generate-a-make-distclean-target-why
# Why disallow in-source build?
# Basically because 'make clean' or 'make distclean' do not work.
# So if you do a 'git pull' you may end up with a developer sandbox
# that no longer works as expected (CMakeCache.txt and other
# generated/configured files may contain data which is no longer valid)
IF(${REALPATH_CMAKE_SOURCE_DIR} STREQUAL ${REALPATH_CMAKE_BINARY_DIR})
IF(FORCE_INSOURCE_BUILD)
MESSAGE(WARNING "This is an in-source build")
ELSE()
MESSAGE(FATAL_ERROR
"Please do not build in-source. "
"Out-of source builds are highly recommended: "
"you can have multiple builds for the same source, "
"and there is an easy way to do cleanup, "
"simply remove the build directory "
"(note that 'make clean' or 'make distclean' does *not* work) "
"\nYou *can* force in-source build by invoking cmake with -DFORCE_INSOURCE_BUILD=1")
ENDIF()
ENDIF()
MACRO(REPORT_CXX_FLAGS)
MESSAGE(STATUS "CMAKE_C_FLAGS: ${CMAKE_C_FLAGS}")
FOREACH(BUILD_TYPE "" _DEBUG _RELWITHDEBINFO _RELEASE _MINSIZEREL)
SET(flag "CMAKE_CXX_FLAGS${BUILD_TYPE}")
MESSAGE(STATUS "${flag}: ${${flag}}")
ENDFOREACH()
ENDMACRO()
# STRING(APPEND ...) from cmake VERSION 3.4
MACRO(STRING_APPEND STRING_VAR INPUT)
SET(${STRING_VAR} "${${STRING_VAR}}${INPUT}")
ENDMACRO()
MACRO(STRING_PREPEND STRING_VAR INPUT)
SET(${STRING_VAR} "${INPUT}${${STRING_VAR}}")
ENDMACRO()
# Write content to file, using CONFIGURE_FILE
# The advantage compared to FILE(WRITE) is that timestamp
# does not change if file already has the same content
SET(MYSQL_CMAKE_SCRIPT_DIR "${CMAKE_SOURCE_DIR}/cmake")
MACRO(CONFIGURE_FILE_CONTENT content file)
SET(CMAKE_CONFIGURABLE_FILE_CONTENT
"${content}\n")
CONFIGURE_FILE(
${MYSQL_CMAKE_SCRIPT_DIR}/configurable_file_content.in
${file}
@ONLY)
ENDMACRO()
SET(BUILD_IS_SINGLE_CONFIG TRUE)
MESSAGE(STATUS "CMAKE_GENERATOR: ${CMAKE_GENERATOR}")
IF(CMAKE_GENERATOR MATCHES "Visual Studio" OR CMAKE_GENERATOR STREQUAL "Xcode")
SET(BUILD_IS_SINGLE_CONFIG FALSE)
ENDIF()
IF(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
SET(MY_COMPILER_IS_CLANG 1)
ELSEIF(CMAKE_CXX_COMPILER_ID MATCHES "GNU")
SET(MY_COMPILER_IS_GNU 1)
ENDIF()
IF(MY_COMPILER_IS_CLANG OR MY_COMPILER_IS_GNU)
SET(MY_COMPILER_IS_GNU_OR_CLANG 1)
ENDIF()
# Maintainer mode is default on only for debug builds using GCC/G++
IF(CMAKE_BUILD_TYPE_UPPER STREQUAL "DEBUG" OR WITH_DEBUG)
IF(MY_COMPILER_IS_GNU)
SET(MYSQL_MAINTAINER_MODE ON CACHE BOOL
"MySQL maintainer-specific development environment")
ENDIF()
ENDIF()
OPTION(WITH_DEFAULT_COMPILER_OPTIONS
"Use flags from cmake/build_configurations/compiler_options.cmake"
ON)
OPTION(WITH_DEFAULT_FEATURE_SET
"Use feature set in cmake/build_configurations/feature_set.cmake"
ON)
IF(BUILD_CONFIG)
INCLUDE(
${CMAKE_SOURCE_DIR}/cmake/build_configurations/${BUILD_CONFIG}.cmake)
ENDIF()
OPTION(INSTALL_STATIC_LIBRARIES "Install static libraries" ON)
#cmake on 64bit windows/mac/solaris doesn't set CMAKE_SYSTEM_PROCESSOR correctly
SET(MYSQL_MACHINE_TYPE ${CMAKE_SYSTEM_PROCESSOR})
SET(KNOWN_64BIT_ARCHITECTURES
aarch64
ppc64
ppc64le
s390x
x86_64
)
# Include the platform-specific file. To allow exceptions, this code
# looks for files in order of how specific they are. If there is, for
# example, a generic Linux.cmake and a version-specific
# Linux-2.6.28-11-generic, it will pick Linux-2.6.28-11-generic and
# include it. It is then up to the file writer to include the generic
# version if necessary.
FOREACH(_base
${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}-${CMAKE_SYSTEM_PROCESSOR}
${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}
${CMAKE_SYSTEM_NAME})
SET(_file ${CMAKE_SOURCE_DIR}/cmake/os/${_base}.cmake)
IF(EXISTS ${_file})
INCLUDE(${_file})
BREAK()
ENDIF()
ENDFOREACH()
IF(UNIX)
OPTION(WITH_INNODB_MEMCACHED "" OFF)
OPTION(ENABLE_MEMCACHED_SASL "Enable SASL on InnoDB Memcached" OFF)
OPTION(ENABLE_MEMCACHED_SASL_PWDB "Enable SASL on InnoDB Memcached" OFF)
ELSE()
OPTION(WITH_INNODB_MEMCACHED "" OFF)
ENDIF()
# Following autotools tradition, add preprocessor definitions
# specified in environment variable CPPFLAGS
IF(DEFINED ENV{CPPFLAGS})
ADD_DEFINITIONS($ENV{CPPFLAGS})
ENDIF()
INCLUDE(CheckTypeSize)
CHECK_TYPE_SIZE("void *" SIZEOF_VOIDP)
MESSAGE(STATUS "SIZEOF_VOIDP ${SIZEOF_VOIDP}")
# On some platforms, cmake may think that CMAKE_SIZEOF_VOID_P == 4
# even if we have configured for 64bit build....
SET(CMAKE_SIZEOF_VOID_P ${SIZEOF_VOIDP})
IF(WITH_DEFAULT_COMPILER_OPTIONS)
INCLUDE(${CMAKE_SOURCE_DIR}/cmake/build_configurations/compiler_options.cmake)
ENDIF()
IF(WITH_DEFAULT_FEATURE_SET)
INCLUDE(${CMAKE_SOURCE_DIR}/cmake/build_configurations/feature_set.cmake)
ENDIF()
INCLUDE(CMakePushCheckState)
# Add macros
INCLUDE(pkg-config)
INCLUDE(character_sets)
INCLUDE(compile_flags)
INCLUDE(cpu_info)
INCLUDE(fileutils)
INCLUDE(zlib)
INCLUDE(zstd)
INCLUDE(lz4)
INCLUDE(icu)
INCLUDE(libevent)
INCLUDE(ssl)
INCLUDE(sasl)
INCLUDE(rpc)
INCLUDE(readline)
INCLUDE(protobuf)
INCLUDE(package_name)
INCLUDE(libutils)
INCLUDE(plugin)
INCLUDE(component)
INCLUDE(install_macros)
INCLUDE(install_layout)
INCLUDE(mysql_add_executable)
INCLUDE(mysqlgcs)
INCLUDE(curl)
INCLUDE(rapidjson)
OPTION(WITH_JEMALLOC "Use jemalloc rather than builtin malloc/free etc." OFF)
IF(WITH_JEMALLOC)
FIND_LIBRARY(JEMALLOC_LIBRARY NAMES jemalloc)
IF(NOT JEMALLOC_LIBRARY)
MESSAGE(FATAL_ERROR "Could not find jemalloc library")
ENDIF()
STRING_APPEND(CMAKE_EXE_LINKER_FLAGS " -ljemalloc")
STRING_APPEND(CMAKE_MODULE_LINKER_FLAGS " -ljemalloc")
STRING_APPEND(CMAKE_SHARED_LINKER_FLAGS " -ljemalloc")
STRING_APPEND(CMAKE_C_FLAGS " -fno-builtin-malloc -fno-builtin-calloc")
STRING_APPEND(CMAKE_C_FLAGS " -fno-builtin-realloc -fno-builtin-free")
STRING_APPEND(CMAKE_CXX_FLAGS " -fno-builtin-malloc -fno-builtin-calloc")
STRING_APPEND(CMAKE_CXX_FLAGS " -fno-builtin-realloc -fno-builtin-free")
ENDIF()
OPTION(ENABLED_PROFILING "Enable profiling" ON)
OPTION(WITHOUT_SERVER OFF)
IF(UNIX)
OPTION(WITH_VALGRIND "Valgrind instrumentation" OFF)
ENDIF()
IF(WIN32)
OPTION(WITH_MSCRT_DEBUG "MS Visual Studio Debug CRT instrumentation" OFF)
ENDIF()
IF(NOT WITHOUT_SERVER)
OPTION(WITH_UNIT_TESTS "Compile MySQL with unit tests" ON)
OPTION(WITH_ROUTER "Build MySQL Router" ON)
ENDIF()
OPTION(WITH_AUTHENTICATION_LDAP
"Report error if the LDAP authentication plugin cannot be built." OFF)
OPTION(WITH_LOCK_ORDER
"Build the lock order mutex instrumentation code." OFF)
IF(WITH_LOCK_ORDER)
EXECUTE_PROCESS(
COMMAND ${CMAKE_COMMAND} -E make_directory lock_order
WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
)
ENDIF()
include(CheckCSourceCompiles)
include(CheckCXXSourceCompiles)
# We need some extra FAIL_REGEX patterns
# Note that CHECK_C_SOURCE_COMPILES is a misnomer, it will also link.
MACRO (MY_CHECK_C_COMPILER_FLAG FLAG RESULT)
CMAKE_PUSH_CHECK_STATE()
STRING_APPEND(CMAKE_REQUIRED_FLAGS " ${FLAG}")
CHECK_C_SOURCE_COMPILES("int main(void) { return 0; }" ${RESULT}
FAIL_REGEX "unknown argument ignored"
FAIL_REGEX "argument unused during compilation"
FAIL_REGEX "unsupported .*option"
FAIL_REGEX "unknown .*option"
FAIL_REGEX "unrecognized .*option"
FAIL_REGEX "ignoring unknown option"
FAIL_REGEX "[Ww]arning: [Oo]ption"
FAIL_REGEX "error: visibility"
FAIL_REGEX "warning: visibility"
)
CMAKE_POP_CHECK_STATE()
ENDMACRO()
MACRO (MY_CHECK_CXX_COMPILER_FLAG FLAG RESULT)
CMAKE_PUSH_CHECK_STATE()
STRING_APPEND(CMAKE_REQUIRED_FLAGS " ${FLAG}")
CHECK_CXX_SOURCE_COMPILES("int main(void) { return 0; }" ${RESULT}
FAIL_REGEX "unknown argument ignored"
FAIL_REGEX "argument unused during compilation"
FAIL_REGEX "unsupported .*option"
FAIL_REGEX "unknown .*option"
FAIL_REGEX "unrecognized .*option"
FAIL_REGEX "ignoring unknown option"
FAIL_REGEX "[Ww]arning: [Oo]ption"
FAIL_REGEX "error: visibility"
FAIL_REGEX "warning: visibility"
)
CMAKE_POP_CHECK_STATE()
ENDMACRO()
# Check whether a specific warning option is supported.
# Intended use is primarily to silence warnings from third-party code.
# If *our* code has warnings with gcc[56789] or clang[345678] the
# code should be fixed, rather than silencing the compiler warnings.
#
# Returns the corresponding "-Wno-<option>" if supported, 0 otherwise.
# WARNING_OPTION should be as found in clang/gcc documentation.
# Note: Sun Studio accepts/ignores anything starting with "-W".
# Visual Studio has a few /W options, but are totally different.
# Hence we check for gcc/clang only.
# No return value for functions in cmake, so we use an output argument.
FUNCTION(MY_CHECK_CXX_COMPILER_WARNING WARNING_OPTION RETURN_VALUE)
# Strip off possible leading -Wno- or -W
STRING(REGEX REPLACE "^-Wno-" "" WARNING_OPTION ${WARNING_OPTION})
STRING(REGEX REPLACE "^-W" "" WARNING_OPTION ${WARNING_OPTION})
# Use HAVE_CXX_W_warning_option as cache variable.
STRING(REPLACE "-" "_" VAR_NAME ${WARNING_OPTION})
STRING(REPLACE "=" "_" VAR_NAME ${VAR_NAME})
STRING(REPLACE "c++" "cpp" VAR_NAME ${VAR_NAME})
SET(VAR_NAME "HAVE_CXX_W_${VAR_NAME}")
IF(MY_COMPILER_IS_GNU_OR_CLANG)
MY_CHECK_CXX_COMPILER_FLAG("-W${WARNING_OPTION}" ${VAR_NAME})
ELSE()
SET(${VAR_NAME} 0 CACHE INTERNAL "-W${WARNING_OPTION} not supported")
ENDIF()
IF(${VAR_NAME})
SET(${RETURN_VALUE} "-Wno-${WARNING_OPTION}" PARENT_SCOPE)
ELSE()
SET(${RETURN_VALUE} 0 PARENT_SCOPE)
ENDIF()
ENDFUNCTION()
MACRO(MY_SANITIZER_CHECK SAN_OPT ADD_OPTIMIZATION RESULT)
MY_CHECK_C_COMPILER_FLAG("${SAN_OPT}" C_RESULT)
MY_CHECK_CXX_COMPILER_FLAG("${SAN_OPT}" CXX_RESULT)
IF(C_RESULT AND CXX_RESULT)
STRING_APPEND(CMAKE_C_FLAGS " ${SAN_OPT}")
STRING_APPEND(CMAKE_CXX_FLAGS " ${SAN_OPT}")
# We switch on basic optimization also for debug builds.
# We disable inlining for stack trace readability.
# With optimization we may get some warnings, so we switch off -Werror
IF(${ADD_OPTIMIZATION})
IF(MSVC)
STRING_APPEND(CMAKE_C_FLAGS " -O1 /Ob0")
STRING_APPEND(CMAKE_CXX_FLAGS " -O1 /Ob0")
ELSE()
STRING_APPEND(CMAKE_C_FLAGS " -O1 -fno-inline")
STRING_APPEND(CMAKE_CXX_FLAGS " -O1 -fno-inline")
ENDIF()
IF(NOT SANITIZE_MAINTAINER_MODE)
SET(MYSQL_MAINTAINER_MODE OFF CACHE BOOL
"MySQL maintainer-specific development environment" FORCE)
ENDIF()
ENDIF()
SET(${RESULT} 1)
ELSE()
SET(${RESULT} 0)
ENDIF()
ENDMACRO()
OPTION(WITH_ASAN "Enable address sanitizer" OFF)
IF(WITH_ASAN)
IF(WIN32_CLANG)
# NOTE: We do _not_ modify CMAKE_C_FLAGS / CMAKE_CXX_FLAGS to add
# -fsanitize=address here yet; Clang (at least of 5.0.0) requires /MT,
# but CMake adds /MDd to all feature checks almost no matter what we do.
# For the same reason, we have to enable it unconditionalyl without
# doing a feature test; we know it's working. Modifying the flags happens
# below, near the end.
SET(HAVE_ASAN 1)
# Get the path to the ASAN support libraries.
GET_FILENAME_COMPONENT(ASAN_LIB_DIR ${CMAKE_CXX_COMPILER} DIRECTORY)
SET(ASAN_LIB_DIR "${ASAN_LIB_DIR}/../lib/clang/${CMAKE_CXX_COMPILER_VERSION}/lib/windows")
GET_FILENAME_COMPONENT(ASAN_LIB_DIR ${ASAN_LIB_DIR} REALPATH)
ELSE()
MY_SANITIZER_CHECK("-fsanitize=address" TRUE WITH_ASAN_OK)
IF(WITH_ASAN_OK)
OPTION(WITH_ASAN_SCOPE "Enable -fsanitize-address-use-after-scope" ON)
SET(HAVE_ASAN 1)
# This works with clang, but not gcc it seems.
MY_CHECK_CXX_COMPILER_FLAG(
"-fsanitize=address -fsanitize-address-use-after-scope"
HAVE_SANITIZE_SCOPE)
IF(WITH_ASAN_SCOPE AND HAVE_SANITIZE_SCOPE)
STRING_APPEND(CMAKE_C_FLAGS " -fsanitize-address-use-after-scope")
STRING_APPEND(CMAKE_CXX_FLAGS " -fsanitize-address-use-after-scope")
ENDIF()
ELSE()
MESSAGE(FATAL_ERROR "Do not know how to enable address sanitizer")
ENDIF()
ENDIF()
ENDIF()
OPTION(WITH_LSAN "Enable leak sanitizer" OFF)
IF(WITH_LSAN)
MY_SANITIZER_CHECK("-fsanitize=leak"
TRUE WITH_LSAN_OK)
IF(NOT WITH_LSAN_OK)
MESSAGE(FATAL_ERROR "Do not know how to enable leak sanitizer")
ELSE()
SET(HAVE_LSAN 1)
ENDIF()
ENDIF()
OPTION(WITH_MSAN "Enable memory sanitizer" OFF)
IF(WITH_MSAN)
MY_SANITIZER_CHECK("-fsanitize=memory -fsanitize-memory-track-origins"
TRUE WITH_MSAN_OK)
IF(NOT WITH_MSAN_OK)
MESSAGE(FATAL_ERROR "Do not know how to enable memory sanitizer")
ELSE()
MESSAGE(WARNING "Memory sanitizer support is currently experimental.")
ENDIF()
ENDIF()
OPTION(WITH_UBSAN "Enable undefined behavior sanitizer" OFF)
IF(WITH_UBSAN)
MY_SANITIZER_CHECK("-fsanitize=undefined" TRUE WITH_UBSAN_OK)
IF(NOT WITH_UBSAN_OK)
MESSAGE(FATAL_ERROR
"Do not know how to enable undefined behavior sanitizer")
ELSE()
SET(HAVE_UBSAN 1)
ENDIF()
ENDIF()
OPTION(WITH_TSAN "Enable thread sanitizer" OFF)
IF(WITH_TSAN)
MY_SANITIZER_CHECK("-fsanitize=thread" TRUE WITH_TSAN_OK)
IF(NOT WITH_TSAN_OK)
MESSAGE(FATAL_ERROR "Do not know how to enable thread sanitizer")
ELSE()
MESSAGE(WARNING "Thread sanitizer support is currently experimental.")
SET(HAVE_TSAN 1)
ENDIF()
ENDIF()
IF(WITH_ASAN AND WITH_MSAN)
MESSAGE(FATAL_ERROR
"Cannot use AddressSanitizer and MemorySanitizer together")
ENDIF()
# Older versions of ccache must be disabled: export CCACHE_DISABLE=1
# See http://www.cmake.org/Wiki/CTest/Coverage
OPTION(ENABLE_GCOV "Enable gcov (debug, Linux builds only)" OFF)
IF (ENABLE_GCOV AND NOT WIN32 AND NOT APPLE)
STRING_APPEND(CMAKE_C_FLAGS " -fprofile-arcs -ftest-coverage -DHAVE_GCOV")
STRING_APPEND(CMAKE_CXX_FLAGS " -fprofile-arcs -ftest-coverage -DHAVE_GCOV")
STRING_APPEND(CMAKE_EXE_LINKER_FLAGS " -fprofile-arcs -ftest-coverage -lgcov")
ENDIF()
OPTION(ENABLE_GPROF "Enable gprof (optimized, Linux builds only)" OFF)
IF (ENABLE_GPROF AND NOT WIN32 AND NOT APPLE)
STRING_APPEND(CMAKE_C_FLAGS " -pg")
STRING_APPEND(CMAKE_CXX_FLAGS " -pg")
STRING_APPEND(CMAKE_EXE_LINKER_FLAGS " -pg")
ENDIF()
# Use lld for Clang if available and not explicitly disabled.
# Also works for gcc on Debian/Ubuntu. Do 'apt install lld'.
IF(LINUX)
OPTION(USE_LD_LLD "Use llvm lld linker" ON)
ELSE()
OPTION(USE_LD_LLD "Use llvm lld linker" OFF)
ENDIF()
IF(USE_LD_LLD)
CMAKE_PUSH_CHECK_STATE(RESET)
# RPM builds on Fedora use -specs files.
# This may cause the test for -fuse-ld=lld to succeed, when it should fail.
SET(SAVE_CMAKE_C_FLAGS ${CMAKE_C_FLAGS})
SET(SAVE_CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS})
STRING(REGEX REPLACE "-specs=/usr/lib/rpm/redhat/.*" ""
CMAKE_C_FLAGS ${CMAKE_C_FLAGS})
STRING(REGEX REPLACE "-specs=/usr/lib/rpm/redhat/.*" ""
CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS})
SET(CMAKE_REQUIRED_LIBRARIES "-fuse-ld=lld")
CHECK_C_SOURCE_COMPILES("int main() {}" C_LD_LLD_RESULT)
CHECK_CXX_SOURCE_COMPILES("int main() {}" CXX_LD_LLD_RESULT)
IF(C_LD_LLD_RESULT AND CXX_LD_LLD_RESULT)
STRING_APPEND(CMAKE_C_LINK_FLAGS " -fuse-ld=lld")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -fuse-ld=lld")
ENDIF()
SET(CMAKE_C_FLAGS ${SAVE_CMAKE_C_FLAGS})
SET(CMAKE_CXX_FLAGS ${SAVE_CMAKE_CXX_FLAGS})
CMAKE_POP_CHECK_STATE()
ENDIF()
# Use gold if available and not explicitly disabled.
IF(WIN32)
# Feature tests are expensive on Windows, and we only support MSVC,
# which does not use gold. Thus, default to off to save the test.
OPTION(USE_LD_GOLD "Use GNU gold linker" OFF)
ELSE()
OPTION(USE_LD_GOLD "Use GNU gold linker" ON)
ENDIF()
IF(LINUX)
OPTION(LINK_RANDOMIZE "Randomize the order of all symbols in the binary" OFF)
SET(LINK_RANDOMIZE_SEED "mysql"
CACHE STRING "Seed to use for link randomization")
ELSE()
SET(LINK_RANDOMIZE OFF)
ENDIF()
IF (USE_LD_GOLD AND NOT (C_LD_LLD_RESULT AND CXX_LD_LLD_RESULT))
CMAKE_PUSH_CHECK_STATE(RESET)
SET(CMAKE_REQUIRED_LIBRARIES "-fuse-ld=gold")
CHECK_C_SOURCE_COMPILES("int main() {}" C_LD_GOLD_RESULT)
CHECK_CXX_SOURCE_COMPILES("int main() {}" CXX_LD_GOLD_RESULT)
IF (C_LD_GOLD_RESULT AND CXX_LD_GOLD_RESULT AND NOT SOLARIS)
STRING_APPEND(CMAKE_C_LINK_FLAGS " -fuse-ld=gold")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -fuse-ld=gold")
# Seemingly --gc-sections causes problems with randomization, so only
# turn it on if we are not making a randomized build.
IF (NOT LINK_RANDOMIZE)
STRING_APPEND(CMAKE_C_LINK_FLAGS " -Wl,--gc-sections")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -Wl,--gc-sections")
ENDIF()
ENDIF()
CMAKE_POP_CHECK_STATE()
ENDIF()
# Linker/binutils bug in Fedora 28, undefined reference to symbol '__bss_start'
IF(LINUX_FEDORA_28)
IF(NOT CMAKE_CXX_LINK_FLAGS MATCHES "-fuse-ld=lld" AND
NOT CMAKE_CXX_LINK_FLAGS MATCHES "-fuse-ld=gold")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -Wl,--copy-dt-needed-entries")
ENDIF()
ENDIF()
IF(LINK_RANDOMIZE)
STRING_APPEND(CMAKE_C_FLAGS " -ffunction-sections -fdata-sections")
STRING_APPEND(CMAKE_CXX_FLAGS " -ffunction-sections -fdata-sections")
SET(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -Wl,--sort-section=name")
SET(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -Wl,--sort-section=name")
SET(CMAKE_CXX_ARCHIVE_CREATE "sh -c '${CMAKE_SOURCE_DIR}/scripts/randomize-order.pl ${LINK_RANDOMIZE_SEED} <OBJECTS> && <CMAKE_AR> qc <TARGET> <LINK_FLAGS> <OBJECTS>'")
SET(CMAKE_CXX_ARCHIVE_CREATE_APPEND "sh -c '${CMAKE_SOURCE_DIR}/scripts/randomize-order.pl ${LINK_RANDOMIZE_SEED} <OBJECTS> && <CMAKE_AR> q <TARGET> <LINK_FLAGS> <OBJECTS>'")
SET(CMAKE_C_ARCHIVE_CREATE ${CMAKE_CXX_ARCHIVE_CREATE})
SET(CMAKE_C_ARCHIVE_CREATE_APPEND ${CMAKE_CXX_ARCHIVE_CREATE_APPEND})
ENDIF()
# Gold and LLD support the --gdb-index option, which adds a .gdb_index
# section to the binaries. It makes loading the binaries in gdb much
# faster. The overhead of generating the index is small in LLD.
OPTION(ADD_GDB_INDEX "Generate a .gdb_index section in the binaries." OFF)
IF(ADD_GDB_INDEX AND
(CMAKE_CXX_LINK_FLAGS MATCHES "-fuse-ld=lld" OR
CMAKE_CXX_LINK_FLAGS MATCHES "-fuse-ld=gold"))
# -fuse-ld=lld is not enough to ensure that ld.lld will actually be used.
# On some platforms we need an extra check for -Wl,--gdb-index
CMAKE_PUSH_CHECK_STATE()
IF(CMAKE_CXX_LINK_FLAGS MATCHES "-fuse-ld=lld")
SET(CMAKE_REQUIRED_LIBRARIES "-fuse-ld=lld -Wl,--gdb-index")
ELSE()
SET(CMAKE_REQUIRED_LIBRARIES "-fuse-ld=gold -Wl,--gdb-index")
ENDIF()
CHECK_CXX_SOURCE_COMPILES("int main() {}" CXX_LD_GDB_INDEX_RESULT)
CMAKE_POP_CHECK_STATE()
IF(CXX_LD_GDB_INDEX_RESULT)
STRING_APPEND(CMAKE_C_LINK_FLAGS " -Wl,--gdb-index")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -Wl,--gdb-index")
# gdb sometimes reports "incomplete type" after linking with
# --gdb-index. This flag makes the index contain enough
# information to avoid the problem.
STRING_APPEND(CMAKE_C_FLAGS " -ggnu-pubnames")
STRING_APPEND(CMAKE_CXX_FLAGS " -ggnu-pubnames")
ELSE()
MESSAGE(STATUS "Seems like linker does not support --gdb-index")
ENDIF()
ENDIF()
IF(LINUX)
# May be set to ON in cmake/build_configurations/mysql_release.cmake
IF(DEFINED REPRODUCIBLE_BUILD)
SET(REPRODUCIBLE_BUILD_DEFAULT ${REPRODUCIBLE_BUILD})
ELSE()
SET(REPRODUCIBLE_BUILD_DEFAULT OFF)
ENDIF()
OPTION(REPRODUCIBLE_BUILD
"Take extra pains to make build result independent of build location and time"
${REPRODUCIBLE_BUILD_DEFAULT})
ENDIF()
IF(REPRODUCIBLE_BUILD)
SET(DEBUG_PREFIX_FLAGS
"-fdebug-prefix-map=${CMAKE_SOURCE_DIR}/=./ -fdebug-prefix-map=${CMAKE_CURRENT_BINARY_DIR}=./obj")
# See if -fdebug-prefix= commands are included in the debug output,
# making the build unreproducible with switches recorded.
# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69821.
EXECUTE_PROCESS(COMMAND
${CMAKE_C_COMPILER} -g3 -x c -S -fdebug-prefix-map=foo=bar -o - -
INPUT_FILE /dev/null OUTPUT_VARIABLE DEBUG_PREFIX_MAP_RESULT)
IF(DEBUG_PREFIX_MAP_RESULT MATCHES "foo=bar")
SET(DEBUG_PREFIX_FLAGS "${DEBUG_PREFIX_FLAGS} -gno-record-gcc-switches")
ENDIF()
STRING_APPEND(CMAKE_C_FLAGS " ${DEBUG_PREFIX_FLAGS}")
STRING_APPEND(CMAKE_CXX_FLAGS " ${DEBUG_PREFIX_FLAGS}")
STRING_APPEND(CMAKE_C_LINK_FLAGS " -Wl,--build-id=none")
STRING_APPEND(CMAKE_CXX_LINK_FLAGS " -Wl,--build-id=none")
SET(BISON_NO_LINE_OPT "--no-lines")
SET_PROPERTY(GLOBAL PROPERTY RULE_LAUNCH_COMPILE
"${CMAKE_SOURCE_DIR}/scripts/invoke-with-relative-paths.pl")
ENDIF()
OPTION(ENABLED_LOCAL_INFILE
"If we should enable LOAD DATA LOCAL by default" OFF)
MARK_AS_ADVANCED(ENABLED_LOCAL_INFILE)
#
# Options related to client-side protocol tracing
#
OPTION(WITH_CLIENT_PROTOCOL_TRACING
"Support for client-side protocol tracing plugins" ON)
OPTION(WITH_TEST_TRACE_PLUGIN
"Have a built-in test protocol trace plugin in libmysql (requires WITH_CLIENT_PROTOCOL_TRACING option)" OFF)
# Sanity checks for protocol tracing options
IF(WITH_TEST_TRACE_PLUGIN AND NOT WITH_CLIENT_PROTOCOL_TRACING)
MESSAGE("WARNING: Test trace plugin was selected but client protocol tracing
infrastructure is not enabled - ignoring")
SET(WITH_TEST_TRACE_PLUGIN 0)
ENDIF()
IF(WITH_TEST_TRACE_PLUGIN AND NOT CMAKE_BUILD_TYPE_UPPER STREQUAL "DEBUG")
MESSAGE(SEND_ERROR
"Test trace plugin was selected but it can be included only in
debug binaries. Set WITH_TEST_TRACE_PLUGIN to OFF or WITH_DEBUG to ON.")
ENDIF()
# Set DBUG_OFF for non-debug project types.
FOREACH(BUILD_TYPE RELEASE RELWITHDEBINFO MINSIZEREL)
FOREACH(LANG C CXX)
STRING_PREPEND(CMAKE_${LANG}_FLAGS_${BUILD_TYPE} "-DDBUG_OFF ")
ENDFOREACH()
ENDFOREACH()
IF(NOT CMAKE_BUILD_TYPE
AND NOT CMAKE_GENERATOR MATCHES "Visual Studio"
AND NOT CMAKE_GENERATOR MATCHES "Xcode")
# This is the case of no CMAKE_BUILD_TYPE choosen, typical for VS and Xcode
# or if custom C flags are set. In VS and Xcode for non-Debug configurations
# DBUG_OFF is already correctly set.
ADD_DEFINITIONS(-DDBUG_OFF)
ENDIF()
# Add safemutex for debug configurations
# Enable debug sync for debug builds.
FOREACH(LANG C CXX)
STRING_PREPEND(CMAKE_${LANG}_FLAGS_DEBUG "-DENABLED_DEBUG_SYNC ")
STRING_PREPEND(CMAKE_${LANG}_FLAGS_DEBUG "-DSAFE_MUTEX ")
ENDFOREACH()
# Set commonly used variables
IF(WIN32)
SET(DEFAULT_MYSQL_HOME "C:/Program Files/MySQL/MySQL Server ${MYSQL_BASE_VERSION}" )
SET(SHAREDIR share)
ELSE()
SET(DEFAULT_MYSQL_HOME ${CMAKE_INSTALL_PREFIX})
SET(SHAREDIR ${DEFAULT_MYSQL_HOME}/${INSTALL_MYSQLSHAREDIR})
ENDIF()
SET(DEFAULT_BASEDIR "${DEFAULT_MYSQL_HOME}")
IF(IS_ABSOLUTE ${INSTALL_MYSQLDATADIR})
SET(MYSQL_DATADIR ${INSTALL_MYSQLDATADIR} CACHE PATH
"default MySQL data directory")
ELSE()
SET(MYSQL_DATADIR "${DEFAULT_MYSQL_HOME}/${INSTALL_MYSQLDATADIR}" CACHE PATH
"default MySQL data directory")
ENDIF()
IF(IS_ABSOLUTE ${INSTALL_MYSQLKEYRINGDIR})
SET(MYSQL_KEYRINGDIR ${INSTALL_MYSQLKEYRINGDIR} CACHE PATH
"default MySQL keyring directory")
ELSE()
SET(MYSQL_KEYRINGDIR "${DEFAULT_MYSQL_HOME}/${INSTALL_MYSQLKEYRINGDIR}"
CACHE PATH "default MySQL keyring directory")
ENDIF()
SET(DEFAULT_CHARSET_HOME "${DEFAULT_MYSQL_HOME}")
SET(PLUGINDIR "${DEFAULT_MYSQL_HOME}/${INSTALL_PLUGINDIR}")
IF(SYSCONFDIR)
SET(DEFAULT_SYSCONFDIR "${SYSCONFDIR}")
ENDIF()
IF(WIN32) # P_tmpdir is not defined on Windows as of VS2015.
SET(TMPDIR "" # So we use empty path as default. In practice TMP/TEMP is used
CACHE PATH
"PATH to MySQL TMP dir")
ELSE()
SET(TMPDIR "P_tmpdir"
CACHE PATH
"PATH to MySQL TMP dir. Defaults to the P_tmpdir macro in <stdio.h>")
ENDIF()
IF(TMPDIR STREQUAL "P_tmpdir")
# Do not quote it, to refer to the P_tmpdir macro.
SET(DEFAULT_TMPDIR "P_tmpdir")
ELSE()
# Quote it, to make it a const char string.
SET(DEFAULT_TMPDIR "\"${TMPDIR}\"")
ENDIF()
INCLUDE(cmake/boost.cmake)
IF (LINUX)
OPTION(WITH_SYSTEMD "Enable installation of systemd support files" OFF)
IF (WITH_SYSTEMD)
INCLUDE(cmake/systemd.cmake)
ENDIF()
ELSE()
IF (WITH_SYSTEMD)
MESSAGE(FATAL_ERROR "Installation of systemd support files not supported")
ENDIF()
ENDIF()
# Run platform tests
INCLUDE(configure.cmake)
# Common defines and includes
ADD_DEFINITIONS(-DHAVE_CONFIG_H)
ADD_DEFINITIONS(-DHAVE_OPENSSL) # TODO: remove #ifdef from C++ code
ADD_DEFINITIONS(-D__STDC_LIMIT_MACROS) # Enable C99 limit macros
ADD_DEFINITIONS(-D__STDC_FORMAT_MACROS) # Enable C99 printf format macros
ADD_DEFINITIONS(-D_USE_MATH_DEFINES) # Get access to M_PI, M_E, etc. in math.h
ADD_DEFINITIONS(-DLZ4_DISABLE_DEPRECATE_WARNINGS) # C++14 deprecation warnings in LZ4.
OPTION(ENABLE_EXPERIMENT_SYSVARS "Expose ussually hidden system variables to allow experiments" OFF)
IF(ENABLE_EXPERIMENT_SYSVARS)
ADD_DEFINITIONS(-DENABLE_EXPERIMENT_SYSVARS)
ENDIF()
INCLUDE_DIRECTORIES(
${CMAKE_CURRENT_BINARY_DIR}
${CMAKE_CURRENT_BINARY_DIR}/include
${CMAKE_SOURCE_DIR}
${CMAKE_SOURCE_DIR}/include
)
SET(WITH_SYSTEM_LIBS_DEFAULT OFF)
OPTION(WITH_LTO
"Enable the link-time optimizer. Currently works for gcc7/gcc8 only." OFF)
IF(WITH_LTO)
MY_CHECK_CXX_COMPILER_FLAG("-flto" CXX_LTO_RESULT)
IF(NOT CXX_LTO_RESULT)
MESSAGE(FATAL_ERROR "Compiler does not support -flto")
ENDIF()
SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -flto")
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -flto")
# Test for parallel linking.
SET(NUM_PROCESSING_UNITS 4)
MY_CHECK_CXX_COMPILER_FLAG(
"-flto=${NUM_PROCESSING_UNITS}" CXX_LTO_PARALLEL_RESULT)
IF(CXX_LTO_PARALLEL_RESULT)
FIND_PROGRAM(NPROC_EXECUTABLE nproc)
IF(NPROC_EXECUTABLE)
EXECUTE_PROCESS(COMMAND ${NPROC_EXECUTABLE}
OUTPUT_VARIABLE NPROC_NUM
RESULT_VARIABLE NPROC_RESULT
OUTPUT_STRIP_TRAILING_WHITESPACE)
IF(NOT NPROC_RESULT)
SET(NUM_PROCESSING_UNITS ${NPROC_NUM})
ENDIF()
ENDIF()
SET(CMAKE_CXX_LINK_FLAGS
"${CMAKE_CXX_LINK_FLAGS} -flto=${NUM_PROCESSING_UNITS}")
SET(CMAKE_SHARED_LINKER_FLAGS
"${CMAKE_SHARED_LINKER_FLAGS} -flto=${NUM_PROCESSING_UNITS}")
ELSE()
SET(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -flto")
SET(CMAKE_SHARED_LINKER_FLAGS
"${CMAKE_SHARED_LINKER_FLAGS} -flto")
ENDIF()
# On some platforms (Fedora) we *must* use gcc-ar / gcc-ranlib
# to get the right plugins for supporting -flto output from gcc.
IF(MY_COMPILER_IS_GNU)
IF(ALTERNATIVE_ENABLE)
GET_FILENAME_COMPONENT(ALTERNATIVE_ENABLE_DIR ${ALTERNATIVE_ENABLE} PATH)
SET(DEVTOOLSET_ROOT "${ALTERNATIVE_ENABLE_DIR}/root")
FIND_PROGRAM(GCC_AR_EXECUTABLE gcc-ar
NO_DEFAULT_PATH
PATHS "${DEVTOOLSET_ROOT}/usr/bin")
FIND_PROGRAM(GCC_RANLIB_EXECUTABLE gcc-ranlib
NO_DEFAULT_PATH
PATHS "${DEVTOOLSET_ROOT}/usr/bin")
ELSEIF(ALTERNATIVE_GCC)
STRING(REGEX MATCH "^([0-9])"
ALTERNATIVE_GCC_MAJ_VER ${CMAKE_C_COMPILER_VERSION})
GET_FILENAME_COMPONENT(ALTERNATIVE_GCC_DIR ${ALTERNATIVE_GCC} PATH)
FIND_PROGRAM(GCC_AR_EXECUTABLE gcc-ar-${ALTERNATIVE_GCC_MAJ_VER}
NO_DEFAULT_PATH
PATHS "${ALTERNATIVE_GCC_DIR}")
FIND_PROGRAM(GCC_RANLIB_EXECUTABLE gcc-ranlib-${ALTERNATIVE_GCC_MAJ_VER}
NO_DEFAULT_PATH
PATHS "${ALTERNATIVE_GCC_DIR}")
ELSE()
FIND_PROGRAM(GCC_AR_EXECUTABLE gcc-ar)
FIND_PROGRAM(GCC_RANLIB_EXECUTABLE gcc-ranlib)
ENDIF()
IF(GCC_AR_EXECUTABLE AND GCC_RANLIB_EXECUTABLE)
SET(CMAKE_AR ${GCC_AR_EXECUTABLE})
SET(CMAKE_RANLIB ${GCC_RANLIB_EXECUTABLE})
ENDIF()
ENDIF()
# We must use -DWITH_PROTOBUF=system.
# There are also bugs exposed by LTO in the bundled ICU and editline sources.
SET(WITH_SYSTEM_LIBS_DEFAULT ON)
ENDIF()
# Explicit list of all -DWITH_XXX=system possibilities
# *except* boost, which requires one specific version to be downloaded.
# RapidJSON is also excluded, since the latest released version does not
# fully support the use of std::regex as the regular expression engine. It
# is required by JSON_SCHEMA_VALID, so don't add it automatically until an
# official version with full support for std::regex is released. The bundled
# version has the necessary patches to make it work.
SET(SYSTEM_LIBRARIES
CURL
EDITLINE
ICU
LIBEVENT
LZ4
PROTOBUF
SSL
ZLIB
ZSTD
)
OPTION(WITH_SYSTEM_LIBS
"Use -DWITH_XXX=system for ${SYSTEM_LIBRARIES}" ${WITH_SYSTEM_LIBS_DEFAULT})
GET_CMAKE_PROPERTY(CACHE_VARS CACHE_VARIABLES)
UNSET(COMMAND_LINE_VARS)
FOREACH(CACHE_VAR ${CACHE_VARS})
GET_PROPERTY(CACHE_VAR_HELPSTRING CACHE ${CACHE_VAR} PROPERTY HELPSTRING)
IF(CACHE_VAR_HELPSTRING STREQUAL
"No help, variable specified on the command line."
)
LIST(APPEND COMMAND_LINE_VARS ${CACHE_VAR})
ENDIF()
ENDFOREACH()
# Default to "system" for all SYSTEM_LIBRARIES
IF(WITH_SYSTEM_LIBS)
FOREACH(SYSTEM_LIB ${SYSTEM_LIBRARIES})
LIST(FIND COMMAND_LINE_VARS WITH_${SYSTEM_LIB} FOUNDIT)
IF(FOUNDIT LESS 0)
SET(WITH_${SYSTEM_LIB} "system")
SET(WITH_${SYSTEM_LIB} "system" CACHE STRING
"Use system rather than bundled" FORCE)
MESSAGE(STATUS "Adding -DWITH_${SYSTEM_LIB}=${WITH_${SYSTEM_LIB}}")
ELSE()
MESSAGE(STATUS
"Found WITH_${SYSTEM_LIB}=${WITH_${SYSTEM_LIB}} on command line")
ENDIF()
ENDFOREACH()
# Don't redo the system analysis on subsequent runs of cmake
UNSET(WITH_SYSTEM_LIBS)
UNSET(WITH_SYSTEM_LIBS CACHE)
ENDIF()
# Add bundled or system zlib.
MYSQL_CHECK_ZLIB_WITH_COMPRESS()
IF(BUILD_BUNDLED_ZLIB)
INCLUDE_DIRECTORIES(BEFORE SYSTEM
${CMAKE_CURRENT_SOURCE_DIR}/extra/zlib
${CMAKE_CURRENT_BINARY_DIR}/extra/zlib)
ENDIF()
# Add bundled or system zstd.
MYSQL_CHECK_ZSTD()
IF(BUILD_BUNDLED_ZSTD)
INCLUDE_DIRECTORIES(BEFORE SYSTEM
${CMAKE_SOURCE_DIR}/extra/zstd/lib)
ADD_SUBDIRECTORY(extra/zstd)
ENDIF()
# Add system openssl.
MYSQL_CHECK_SSL()
MYSQL_CHECK_SSL_DLLS()
# Add system/bundled editline.
MYSQL_CHECK_EDITLINE()
# Add libevent
MYSQL_CHECK_LIBEVENT()
# Add lz4 library
MYSQL_CHECK_LZ4()
# Add icu library
MYSQL_CHECK_ICU()
# Add SASL library
MYSQL_CHECK_SASL()
# Add protoc and libprotobuf
IF(NOT WITHOUT_SERVER)
MYSQL_CHECK_PROTOBUF()
ENDIF()
# Try and set CURL_LIBRARY
MYSQL_CHECK_CURL()
MYSQL_CHECK_CURL_DLLS()
# Add RapidJSON library.
MYSQL_CHECK_RAPIDJSON()
MACRO(MY_INCLUDE_SYSTEM_DIRECTORIES LIBRARY)
IF(${WITH_${LIBRARY}} STREQUAL "bundled")
SET(BEFORE_OR_AFTER "BEFORE")
ELSE()
SET(BEFORE_OR_AFTER "AFTER")
ENDIF()
IF(DEFINED ${LIBRARY}_INCLUDE_DIRS)
INCLUDE_DIRECTORIES(${BEFORE_OR_AFTER} SYSTEM ${${LIBRARY}_INCLUDE_DIRS})
ELSEIF(DEFINED ${LIBRARY}_INCLUDE_DIR)
INCLUDE_DIRECTORIES(${BEFORE_OR_AFTER} SYSTEM ${${LIBRARY}_INCLUDE_DIR})
ENDIF()
IF("${${LIBRARY}_INCLUDE_DIR}" STREQUAL "")
IF("${${LIBRARY}_INCLUDE_DIRS}" STREQUAL "")
MESSAGE(WARNING "${LIBRARY} is unknown")
ENDIF()
ENDIF()
IF(DEFINED ${LIBRARY}_INCLUDE_DIRS AND DEFINED ${LIBRARY}_INCLUDE_DIR)
IF(NOT "${${LIBRARY}_INCLUDE_DIR}" STREQUAL "${${LIBRARY}_INCLUDE_DIRS}")
MESSAGE(WARNING
"NOT ${${LIBRARY}_INCLUDE_DIR} STREQUAL ${${LIBRARY}_INCLUDE_DIRS}")
ENDIF()
ENDIF()
ENDMACRO()
MACRO(MY_TARGET_INCLUDE_SYSTEM_DIRECTORIES TARGET LIBRARY)
IF(${WITH_${LIBRARY}} STREQUAL "bundled")
TARGET_INCLUDE_DIRECTORIES(${TARGET} SYSTEM BEFORE PRIVATE
${${LIBRARY}_INCLUDE_DIR})
ELSE()
TARGET_INCLUDE_DIRECTORIES(${TARGET} SYSTEM PRIVATE
${${LIBRARY}_INCLUDE_DIR})
ENDIF()
ENDMACRO()
IF(LINUX)
# Check for pthread_setname_np
CHECK_C_SOURCE_COMPILES("
#include <pthread.h>
int main(int ac, char **av)
{
const char *thread_name= 0;
int ret = pthread_setname_np(pthread_self(), thread_name);
return ret;
}"
HAVE_PTHREAD_SETNAME_NP)
ENDIF()
IF(WITH_PROTOBUF STREQUAL "bundled")
SET(UNIX_INSTALL_RPATH_ORIGIN_PRIV_LIBDIR 1)
ADD_SUBDIRECTORY(extra/protobuf)
ENDIF()
#
# Setup maintainer mode options by the end. Platform checks are
# not run with the warning options as to not perturb fragile checks
# (i.e. do not make warnings into errors).
#
# Why don't these flags affect the entire build?
# Because things may already have been included with ADD_SUBDIRECTORY
#
OPTION(MYSQL_MAINTAINER_MODE
"MySQL maintainer-specific development environment" OFF)
INCLUDE(maintainer)
IF(WITH_UNIT_TESTS)
ENABLE_TESTING()
INCLUDE(googletest)
ENDIF()
ADD_SUBDIRECTORY(include)
ADD_SUBDIRECTORY(strings)
ADD_SUBDIRECTORY(vio)
ADD_SUBDIRECTORY(mysys)
ADD_SUBDIRECTORY(libmysql)
ADD_SUBDIRECTORY(libbinlogevents)
ADD_SUBDIRECTORY(libbinlogstandalone)
IF(NOT WITHOUT_SERVER)
# Build failure on Solaris 11.3 for debug builds with NDBCLUSTER.
# Adding basic local optimizations unbreaks it.
# We *could* test 'uname -v' VERSION_LESS 11.4 here.
# A clean build takes roughly the same time with or without -xO1
# Link time of mysqld is roughly 10% faster with -xO1.
IF(SOLARIS_SPARC AND CMAKE_BUILD_TYPE_UPPER STREQUAL "DEBUG")
MESSAGE(STATUS
"Adding -xO1 for debug builds on Solaris ${MY_KERNEL_VERSION}")
STRING_APPEND(CMAKE_CXX_FLAGS_DEBUG " -xO1")
ENDIF()
# Add storage engines and plugins.
SET (MYSQLD_STATIC_PLUGIN_LIBS "" CACHE INTERNAL "")
CONFIGURE_PLUGINS()
ELSE()
IF(EXISTS "${CMAKE_SOURCE_DIR}/storage/ndb")
# We may still want Cluster client libraries, use -DWITH_NDBCLUSTER=1
ADD_SUBDIRECTORY(storage/ndb)
ENDIF()
ENDIF()
IF(NOT WITHOUT_SERVER)
CONFIGURE_COMPONENTS()
ENDIF()
IF(WITH_UNIT_TESTS)
ADD_SUBDIRECTORY(unittest)
ADD_SUBDIRECTORY(unittest/examples)
ADD_SUBDIRECTORY(unittest/mytap)
ADD_SUBDIRECTORY(unittest/mytap/t)
ENDIF()
ADD_SUBDIRECTORY(client)
ADD_SUBDIRECTORY(utilities)
ADD_SUBDIRECTORY(share)
ADD_SUBDIRECTORY(libservices)
IF(NOT WITHOUT_SERVER)
ADD_SUBDIRECTORY(testclients)
ADD_SUBDIRECTORY(sql)
ENDIF()
# scripts/mysql_config depends on client and server targets loaded above.
# It is referenced by some of the directories below, so we insert it here.
ADD_SUBDIRECTORY(scripts)
IF(NOT WITHOUT_SERVER)
ADD_SUBDIRECTORY(mysql-test)
ADD_SUBDIRECTORY(mysql-test/lib/My/SafeProcess)
ADD_SUBDIRECTORY(support-files)
IF(EXISTS ${CMAKE_SOURCE_DIR}/internal/CMakeLists.txt)
ADD_SUBDIRECTORY(internal)
ENDIF()
ENDIF()
INCLUDE(cmake/abi_check.cmake)
INCLUDE(cmake/tags.cmake)
CONFIGURE_FILE(config.h.cmake ${CMAKE_BINARY_DIR}/include/my_config.h)
CONFIGURE_FILE(config.h.cmake ${CMAKE_BINARY_DIR}/include/config.h)
CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/include/mysql_version.h.in
${CMAKE_BINARY_DIR}/include/mysql_version.h )
CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/sql/sql_builtin.cc.in
${CMAKE_BINARY_DIR}/sql/sql_builtin.cc)
# depends on mysql_version.h to exist
IF(NOT WITHOUT_SERVER)
IF(WITH_ROUTER)
ADD_SUBDIRECTORY(router)
ENDIF()
ENDIF()
IF(ENABLE_GCOV)
INCLUDE(fastcov)
ENDIF()
IF(UNIX)
ADD_SUBDIRECTORY(man)
ENDIF()
IF(NOT WITHOUT_SERVER)
ADD_SUBDIRECTORY(packaging/rpm-common)
ADD_SUBDIRECTORY(packaging/rpm-oel)
ADD_SUBDIRECTORY(packaging/rpm-fedora)
ADD_SUBDIRECTORY(packaging/rpm-sles)
ADD_SUBDIRECTORY(packaging/rpm-docker)
ADD_SUBDIRECTORY(packaging/deb-in)
ENDIF()
GET_PROPERTY(CWD_DEFINITIONS DIRECTORY PROPERTY COMPILE_DEFINITIONS)
CONFIGURE_FILE(
${CMAKE_SOURCE_DIR}/cmake/info_macros.cmake.in
${CMAKE_BINARY_DIR}/info_macros.cmake @ONLY)
SET(KNOWN_CONVENIENCE_LIBRARIES "" CACHE INTERNAL "")
# Add to the 'make clean' target.
# With this you need to do 'cmake .' before doing 'make' again.
SET_PROPERTY(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES
"${CMAKE_BINARY_DIR}/archive_output_directory"
"${CMAKE_BINARY_DIR}/library_output_directory"
)
# Handle the "INFO_*" files.
INCLUDE(${CMAKE_BINARY_DIR}/info_macros.cmake)
# Source: This can be done during the cmake phase, all information is
# available, but should be repeated on each "make" just in case someone
# does "cmake ; make ; git pull ; make".
CREATE_INFO_SRC(${CMAKE_BINARY_DIR}/Docs)
ADD_CUSTOM_TARGET(INFO_SRC ALL
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_SOURCE_DIR}/cmake/info_src.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
# Build flags: This must be postponed to the make phase.
ADD_CUSTOM_TARGET(INFO_BIN ALL
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_SOURCE_DIR}/cmake/info_bin.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
# Packaging
IF(WIN32)
OPTION(BUNDLE_RUNTIME_LIBRARIES "INSTALL runtime libraries" OFF)
IF(BUNDLE_RUNTIME_LIBRARIES)
SET(RUNTIME_LIBRARIES
msvcp140
ucrtbase
vcruntime140
)
FOREACH(LIB ${RUNTIME_LIBRARIES})
SET(LIB_PATH "C:/Windows/System32/${LIB}.dll")
SET(LIB_D_PATH "C:/Windows/System32/${LIB}d.dll")
FOREACH(LIBRARY_PATH ${LIB_PATH} ${LIB_D_PATH})
IF(EXISTS "${LIBRARY_PATH}")
MESSAGE(STATUS "INSTALL ${LIBRARY_PATH} to ${INSTALL_BINDIR}")
INSTALL(FILES
"${LIBRARY_PATH}" DESTINATION "${INSTALL_BINDIR}"
COMPONENT SharedLibraries)
ELSE()
MESSAGE(STATUS "Could not find ${LIBRARY_PATH}")
ENDIF()
ENDFOREACH()
ENDFOREACH()
ENDIF()
ENDIF()
IF(WIN32)
SET(CPACK_GENERATOR "ZIP")
ELSE()
SET(CPACK_GENERATOR "TGZ")
ENDIF()
ADD_SUBDIRECTORY(packaging/WiX)
ADD_SUBDIRECTORY(packaging/solaris)
# Produce separate tarballs for each INSTALL COMPONENT
IF(PACK_SEPARATE_COMPONENTS)
SET(CPACK_ARCHIVE_COMPONENT_INSTALL ON)
SET(CPACK_COMPONENTS_GROUPING IGNORE)
ENDIF()
IF(UNIX)
INSTALL(FILES
Docs/mysql.info
DESTINATION ${INSTALL_INFODIR} OPTIONAL COMPONENT Info)
ENDIF()
#
# RPM installs documentation directly from the source tree
#
IF(NOT INSTALL_LAYOUT MATCHES "RPM")
INSTALL(FILES
README
LICENSE
DESTINATION ${INSTALL_DOCREADMEDIR} COMPONENT Readme)
INSTALL(FILES
${CMAKE_BINARY_DIR}/Docs/INFO_SRC
${CMAKE_BINARY_DIR}/Docs/INFO_BIN
DESTINATION ${INSTALL_DOCDIR} COMPONENT Info
)
# MYSQL_DOCS_LOCATON is used in "make dist",
# points to the documentation directory
SET(MYSQL_DOCS_LOCATION "" CACHE PATH
"Location from where documentation is copied")
MARK_AS_ADVANCED(MYSQL_DOCS_LOCATION)
INSTALL(DIRECTORY Docs/ DESTINATION ${INSTALL_DOCDIR}
COMPONENT Documentation
PATTERN "Makefile.*" EXCLUDE
PATTERN "glibc*" EXCLUDE
PATTERN "linuxthreads.txt" EXCLUDE
PATTERN "myisam.txt" EXCLUDE
PATTERN "mysql.info" EXCLUDE
PATTERN "sp-imp-spec.txt" EXCLUDE
PATTERN "README.build" EXCLUDE
)
ENDIF()
# Now that we're done with all ADD_SUBDIRECTORY and thus all feature tests,
# we can safely enable ASan on Clang/Win32 if needed.
IF(HAVE_ASAN AND WIN32_CLANG)
STRING_APPEND(CMAKE_C_FLAGS
" -fsanitize=address -fsanitize-address-use-after-scope")
STRING_APPEND(CMAKE_CXX_FLAGS
" -fsanitize=address -fsanitize-address-use-after-scope")
ENDIF()
IF(UNIX)
EXECUTE_PROCESS(
COMMAND ${CMAKE_COMMAND} -E make_directory library_output_directory
COMMAND ${CMAKE_COMMAND} -E make_directory plugin_output_directory
COMMAND ${CMAKE_COMMAND} -E make_directory runtime_output_directory
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
ENDIF()
# Pre-create directories for library_output_directory and
# plugin_output_directory, so create_symlink does not fail in ssl.cmake
# Do not pre-create runtime_output_directory/Debug or
# runtime_output_directory/RelWithDebInfo, mtr gets confused, and must be
# run with --vs-config=Debug or --vs-config=RelWithDebInfo in order to work.
IF(APPLE AND NOT BUILD_IS_SINGLE_CONFIG)
FOREACH(dir
library_output_directory
plugin_output_directory
)
EXECUTE_PROCESS(
COMMAND ${CMAKE_COMMAND} -E make_directory ${dir}/Debug
COMMAND ${CMAKE_COMMAND} -E make_directory ${dir}/RelWithDebInfo
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
ENDFOREACH()
ENDIF()
IF(UNIX)
EXECUTE_PROCESS(
COMMAND ${CMAKE_COMMAND} -E create_symlink
./runtime_output_directory bin
COMMAND ${CMAKE_COMMAND} -E create_symlink
./library_output_directory lib
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
ENDIF()
SET(DOXYGEN_OUTPUT_DIR "${CMAKE_CURRENT_BINARY_DIR}/doxygen")
FIND_PACKAGE(Doxygen)
IF(DOXYGEN_FOUND)
CONFIGURE_FILE(Doxyfile.in Doxyfile @ONLY)
ADD_CUSTOM_TARGET(
doxygen
COMMAND ${CMAKE_COMMAND}
-DDOXYGEN_EXECUTABLE=${DOXYGEN_EXECUTABLE}
-DDOXYFILE=${CMAKE_BINARY_DIR}/Doxyfile
-DERROR_FILE=${CMAKE_BINARY_DIR}/doxyerror.log
-DOUTPUT_FILE=${CMAKE_BINARY_DIR}/doxyoutput.log
-DSOURCE_DIR=${CMAKE_SOURCE_DIR}
-DTOFIX_FILE=${CMAKE_BINARY_DIR}/tofix-all.log
-DREGRESSION_FILE=${CMAKE_BINARY_DIR}/tofix-regressions.log
-DIGNORE_FILE=${CMAKE_SOURCE_DIR}/Doxyfile-ignored
-P ${CMAKE_SOURCE_DIR}/run_doxygen.cmake
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
COMMENT "Generating Doxygen documentation" VERBATIM
)
SET_PROPERTY(TARGET doxygen PROPERTY EXCLUDE_FROM_ALL TRUE)
IF(WIN32)
SET_PROPERTY(TARGET doxygen PROPERTY EXCLUDE_FROM_DEFAULT_BUILD TRUE)
ENDIF()
ENDIF(DOXYGEN_FOUND)
INCLUDE(CPack)
# C/CXX compiler flags consist of:
# CPPFLAGS Taken from environment, see above.
# ADD_DEFINITIONS In each individual CMakeLists.txt
# CMAKE_CXX_FLAGS From command line.
# We extend these in maintainer.cmake
# We extend these in compiler_options.cmake
# ENV{CXXFLAGS} From environment, but environment is ignored if
# CMAKE_CXX_FLAGS is also given on command line
# CMAKE_CXX_FLAGS_${CMAKE_BUILD_TYPE}, typical initial cmake values:
# DEBUG -g
# RELWITHDEBINFO -O2 -g -DNDEBUG
# RELEASE -O3 -DNDEBUG
# MINSIZEREL -Os -DNDEBUG
#
# The compiler command line is
# g++ DEFINITIONS CMAKE_CXX_FLAGS CMAKE_CXX_FLAGS_<configuration>
#
# So, if you want to use '-O3' for a RELWITHDEBINFO build, you should do:
# cmake -DCMAKE_CXX_FLAGS_RELWITHDEBINFO="-O3 -g -DNDEBUG"
#
# Note that CMakeCache.txt contains cmake builtins for these variables,
# *not* the values that will actually be used, which we report here:
IF(BUILD_IS_SINGLE_CONFIG)
MESSAGE(STATUS "CMAKE_BUILD_TYPE: ${CMAKE_BUILD_TYPE}")
ENDIF()
GET_PROPERTY(cwd_definitions DIRECTORY PROPERTY COMPILE_DEFINITIONS)
MESSAGE(STATUS "COMPILE_DEFINITIONS: ${cwd_definitions}")
REPORT_CXX_FLAGS()
MESSAGE(STATUS "CMAKE_C_LINK_FLAGS: ${CMAKE_C_LINK_FLAGS}")
MESSAGE(STATUS "CMAKE_CXX_LINK_FLAGS: ${CMAKE_CXX_LINK_FLAGS}")
MESSAGE(STATUS "CMAKE_EXE_LINKER_FLAGS ${CMAKE_EXE_LINKER_FLAGS}")
MESSAGE(STATUS "CMAKE_MODULE_LINKER_FLAGS ${CMAKE_MODULE_LINKER_FLAGS}")
MESSAGE(STATUS "CMAKE_SHARED_LINKER_FLAGS ${CMAKE_SHARED_LINKER_FLAGS}")