/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2011-01-13 weety first version */ #include #include #include #include #include #include "spi-davinci.h" #define unlikely(x) x #define barrier() __asm__ __volatile__("": : :"memory") #define cpu_relax() barrier() #define SPI_DEBUG 0 #if SPI_DEBUG #define spi_dbg(dev, fmt, ...) \ do { \ rt_kprintf("%s:", dev->parent.name); \ rt_kprintf(fmt, ##__VA_ARGS__); \ } while(0) #else #define spi_dbg(dev, fmt, ...) #endif #define SZ_64K 0x10000 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define SPI_NO_RESOURCE ((resource_size_t)-1) #define SPI_MAX_CHIPSELECT 2 #define CS_DEFAULT 0xFF #define __iomem #define BIT(nr) (1UL << (nr)) #define SPIFMT_PHASE_MASK BIT(16) #define SPIFMT_POLARITY_MASK BIT(17) #define SPIFMT_DISTIMER_MASK BIT(18) #define SPIFMT_SHIFTDIR_MASK BIT(20) #define SPIFMT_WAITENA_MASK BIT(21) #define SPIFMT_PARITYENA_MASK BIT(22) #define SPIFMT_ODD_PARITY_MASK BIT(23) #define SPIFMT_WDELAY_MASK 0x3f000000u #define SPIFMT_WDELAY_SHIFT 24 #define SPIFMT_PRESCALE_SHIFT 8 /* SPIPC0 */ #define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ #define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ #define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ #define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ #define SPIINT_MASKALL 0x0101035F #define SPIINT_MASKINT 0x0000015F #define SPI_INTLVL_1 0x000001FF #define SPI_INTLVL_0 0x00000000 /* SPIDAT1 (upper 16 bit defines) */ #define SPIDAT1_CSHOLD_MASK BIT(12) /* SPIGCR1 */ #define SPIGCR1_CLKMOD_MASK BIT(1) #define SPIGCR1_MASTER_MASK BIT(0) #define SPIGCR1_POWERDOWN_MASK BIT(8) #define SPIGCR1_LOOPBACK_MASK BIT(16) #define SPIGCR1_SPIENA_MASK BIT(24) /* SPIBUF */ #define SPIBUF_TXFULL_MASK BIT(29) #define SPIBUF_RXEMPTY_MASK BIT(31) /* SPIDELAY */ #define SPIDELAY_C2TDELAY_SHIFT 24 #define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT) #define SPIDELAY_T2CDELAY_SHIFT 16 #define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT) #define SPIDELAY_T2EDELAY_SHIFT 8 #define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT) #define SPIDELAY_C2EDELAY_SHIFT 0 #define SPIDELAY_C2EDELAY_MASK 0xFF /* Error Masks */ #define SPIFLG_DLEN_ERR_MASK BIT(0) #define SPIFLG_TIMEOUT_MASK BIT(1) #define SPIFLG_PARERR_MASK BIT(2) #define SPIFLG_DESYNC_MASK BIT(3) #define SPIFLG_BITERR_MASK BIT(4) #define SPIFLG_OVRRUN_MASK BIT(6) #define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) #define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \ | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ | SPIFLG_OVRRUN_MASK) #define SPIINT_DMA_REQ_EN BIT(16) /* SPI Controller registers */ #define SPIGCR0 0x00 #define SPIGCR1 0x04 #define SPIINT 0x08 #define SPILVL 0x0c #define SPIFLG 0x10 #define SPIPC0 0x14 #define SPIDAT1 0x3c #define SPIBUF 0x40 #define SPIDELAY 0x48 #define SPIDEF 0x4c #define SPIFMT0 0x50 /* We have 2 DMA channels per CS, one for RX and one for TX */ struct davinci_spi_dma { int tx_channel; int rx_channel; int dummy_param_slot; enum dma_event_q eventq; }; /* SPI Controller driver's private data. */ struct davinci_spi { struct rt_spi_bus parent; struct clk *clk; u8 version; void __iomem *base; u32 irq; struct rt_completion done; const void *tx; void *rx; #define SMP_CACHE_BYTES 32 #define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1) u8 rx_tmp_buf[SPI_TMP_BUFSZ]; int rcount; int wcount; struct davinci_spi_dma dma; void (*get_rx)(u32 rx_data, struct davinci_spi *); u32 (*get_tx)(struct davinci_spi *); u8 bytes_per_word[SPI_MAX_CHIPSELECT]; u8 chip_sel[SPI_MAX_CHIPSELECT]; struct davinci_spi_config *controller_data; int cshold_bug; }; static struct davinci_spi_config davinci_spi_default_cfg; extern void mmu_clean_dcache(rt_uint32_t buffer, rt_uint32_t size); extern void mmu_invalidate_dcache(rt_uint32_t buffer, rt_uint32_t size); static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi) { if (dspi->rx) { u8 *rx = dspi->rx; *rx++ = (u8)data; dspi->rx = rx; } } static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) { if (dspi->rx) { u16 *rx = dspi->rx; *rx++ = (u16)data; dspi->rx = rx; } } static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) { u32 data = 0; if (dspi->tx) { const u8 *tx = dspi->tx; data = *tx++; dspi->tx = tx; } return data; } static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) { u32 data = 0; if (dspi->tx) { const u16 *tx = dspi->tx; data = *tx++; dspi->tx = tx; } return data; } static inline void set_io_bits(void __iomem *addr, u32 bits) { u32 v = readl(addr); v |= bits; writel(v, addr); } static inline void clear_io_bits(void __iomem *addr, u32 bits) { u32 v = readl(addr); v &= ~bits; writel(v, addr); } /* * Interface to control the chip select signal */ static void davinci_spi_chipselect(struct rt_spi_device *spi, int value) { struct davinci_spi *dspi; u8 chip_sel = (u8)spi->parent.user_data; u16 spidat1 = CS_DEFAULT; bool gpio_chipsel = RT_FALSE; dspi = spi->bus->parent.user_data; if (chip_sel < SPI_MAX_CHIPSELECT && dspi->chip_sel[chip_sel] != SPI_INTERN_CS) gpio_chipsel = RT_TRUE; /* * Board specific chip select logic decides the polarity and cs * line for the controller */ if (gpio_chipsel) { if (value == 0) gpio_set_value(dspi->chip_sel[chip_sel], 0); else gpio_set_value(dspi->chip_sel[chip_sel], 1); } else { spidat1 = readw(dspi->base + SPIDAT1 + 2); if (value == 0) { spidat1 |= SPIDAT1_CSHOLD_MASK; spidat1 &= ~(0x1 << chip_sel); } else { spidat1 &= ~SPIDAT1_CSHOLD_MASK; spidat1 |= 0x03; } rt_kprintf("0x%04x\n", spidat1); writew(spidat1, dspi->base + SPIDAT1 + 2); } } /** * davinci_spi_get_prescale - Calculates the correct prescale value * @maxspeed_hz: the maximum rate the SPI clock can run at * * This function calculates the prescale value that generates a clock rate * less than or equal to the specified maximum. * * Returns: calculated prescale - 1 for easy programming into SPI registers * or negative error number if valid prescalar cannot be updated. */ static inline int davinci_spi_get_prescale(struct davinci_spi *dspi, u32 max_speed_hz) { int ret; ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz); if (ret < 3) { rt_kprintf("spi clock freq too high\n"); ret = 3; } if (ret > 256) { rt_kprintf("spi clock freq too litter\n"); ret = 256; } /*if (ret < 3 || ret > 256) return -RT_ERROR;*/ return ret - 1; } /** * davinci_spi_setup_transfer - This functions will determine transfer method * @spi: spi device on which data transfer to be done * @t: spi transfer in which transfer info is filled * * This function determines data transfer method (8/16/32 bit transfer). * It will also set the SPI Clock Control register according to * SPI slave device freq. */ static int davinci_spi_setup_transfer(struct rt_spi_device *spi, struct rt_spi_configuration *cfg) { struct davinci_spi *dspi; struct davinci_spi_config *spicfg; u8 bits_per_word = 0; u32 hz = 0, spifmt = 0, prescale = 0; u8 chip_select = (u8)spi->parent.user_data; dspi = spi->bus->parent.user_data; spicfg = (struct davinci_spi_config *)dspi->controller_data; if (!spicfg) spicfg = &davinci_spi_default_cfg; bits_per_word = cfg->data_width; hz = cfg->max_hz; /* * Assign function pointer to appropriate transfer method * 8bit, 16bit or 32bit transfer */ if (bits_per_word <= 8 && bits_per_word >= 2) { dspi->get_rx = davinci_spi_rx_buf_u8; dspi->get_tx = davinci_spi_tx_buf_u8; dspi->bytes_per_word[chip_select] = 1; } else if (bits_per_word <= 16 && bits_per_word >= 2) { dspi->get_rx = davinci_spi_rx_buf_u16; dspi->get_tx = davinci_spi_tx_buf_u16; dspi->bytes_per_word[chip_select] = 2; } else return -RT_ERROR; /* Set up SPIFMTn register, unique to this chipselect. */ prescale = davinci_spi_get_prescale(dspi, hz); if (prescale < 0) return prescale; spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f); if (!(cfg->mode & RT_SPI_MSB)) spifmt |= SPIFMT_SHIFTDIR_MASK; if (cfg->mode & RT_SPI_CPOL) spifmt |= SPIFMT_POLARITY_MASK; if (!(cfg->mode & RT_SPI_CPHA)) spifmt |= SPIFMT_PHASE_MASK; /* * Version 1 hardware supports two basic SPI modes: * - Standard SPI mode uses 4 pins, with chipselect * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) * (distinct from SPI_3WIRE, with just one data wire; * or similar variants without MOSI or without MISO) * * Version 2 hardware supports an optional handshaking signal, * so it can support two more modes: * - 5 pin SPI variant is standard SPI plus SPI_READY * - 4 pin with enable is (SPI_READY | SPI_NO_CS) */ if (dspi->version == SPI_VERSION_2) { u32 delay = 0; spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) & SPIFMT_WDELAY_MASK); if (spicfg->odd_parity) spifmt |= SPIFMT_ODD_PARITY_MASK; if (spicfg->parity_enable) spifmt |= SPIFMT_PARITYENA_MASK; if (spicfg->timer_disable) { spifmt |= SPIFMT_DISTIMER_MASK; } else { delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT) & SPIDELAY_C2TDELAY_MASK; delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT) & SPIDELAY_T2CDELAY_MASK; } if (cfg->mode & RT_SPI_READY) { spifmt |= SPIFMT_WAITENA_MASK; delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT) & SPIDELAY_T2EDELAY_MASK; delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT) & SPIDELAY_C2EDELAY_MASK; } writel(delay, dspi->base + SPIDELAY); } writel(spifmt, dspi->base + SPIFMT0); return 0; } #if 0 /** * davinci_spi_setup - This functions will set default transfer method * @spi: spi device on which data transfer to be done * * This functions sets the default transfer method. */ static int davinci_spi_setup(struct spi_device *spi) { int retval = 0; struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; dspi = spi_master_get_devdata(spi->master); pdata = dspi->pdata; /* if bits per word length is zero then set it default 8 */ if (!spi->bits_per_word) spi->bits_per_word = 8; if (!(spi->mode & SPI_NO_CS)) { if ((pdata->chip_sel == NULL) || (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS)) set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); } if (spi->mode & SPI_READY) set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); if (spi->mode & SPI_LOOP) set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); else clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); return retval; } #endif static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) { struct rt_device *sdev = &dspi->parent.parent; if (int_status & SPIFLG_TIMEOUT_MASK) { spi_dbg(sdev, "SPI Time-out Error\n"); return -RT_ETIMEOUT; } if (int_status & SPIFLG_DESYNC_MASK) { spi_dbg(sdev, "SPI Desynchronization Error\n"); return -RT_EIO; } if (int_status & SPIFLG_BITERR_MASK) { spi_dbg(sdev, "SPI Bit error\n"); return -RT_EIO; } if (dspi->version == SPI_VERSION_2) { if (int_status & SPIFLG_DLEN_ERR_MASK) { spi_dbg(sdev, "SPI Data Length Error\n"); return -RT_EIO; } if (int_status & SPIFLG_PARERR_MASK) { spi_dbg(sdev, "SPI Parity Error\n"); return -RT_EIO; } if (int_status & SPIFLG_OVRRUN_MASK) { spi_dbg(sdev, "SPI Data Overrun error\n"); return -RT_EIO; } if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { spi_dbg(sdev, "SPI Buffer Init Active\n"); return -RT_EBUSY; } } return 0; } /** * davinci_spi_process_events - check for and handle any SPI controller events * @dspi: the controller data * * This function will check the SPIFLG register and handle any events that are * detected there */ static int davinci_spi_process_events(struct davinci_spi *dspi) { u32 buf, status, errors = 0, spidat1; buf = readl(dspi->base + SPIBUF); if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) { dspi->get_rx(buf & 0xFFFF, dspi); dspi->rcount--; } status = readl(dspi->base + SPIFLG); if (unlikely(status & SPIFLG_ERROR_MASK)) { errors = status & SPIFLG_ERROR_MASK; goto out; } if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) { spidat1 = readl(dspi->base + SPIDAT1); dspi->wcount--; spidat1 &= ~0xFFFF; spidat1 |= 0xFFFF & dspi->get_tx(dspi); writel(spidat1, dspi->base + SPIDAT1); } out: return errors; } static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data) { struct davinci_spi *dspi = data; struct davinci_spi_dma *dma = &dspi->dma; edma_stop(lch); if (status == DMA_COMPLETE) { if (lch == dma->rx_channel) dspi->rcount = 0; if (lch == dma->tx_channel) dspi->wcount = 0; } if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE)) rt_completion_done(&dspi->done); } /** * davinci_spi_bufs - functions which will handle transfer data * @spi: spi device on which data transfer to be done * @t: spi transfer in which transfer info is filled * * This function will put data to be transferred into data register * of SPI controller and then wait until the completion will be marked * by the IRQ Handler. */ static int davinci_spi_bufs(struct rt_spi_device *spi, struct rt_spi_message *msg) { struct davinci_spi *dspi; int data_type, ret; u32 tx_data, spidat1; u32 errors = 0; struct davinci_spi_config *spicfg; unsigned rx_buf_count; struct rt_device *sdev; u8 chip_select = (u8)spi->parent.user_data; dspi = spi->bus->parent.user_data; spicfg = (struct davinci_spi_config *)dspi->controller_data; if (!spicfg) spicfg = &davinci_spi_default_cfg; sdev = &dspi->parent.parent; /* convert len to words based on bits_per_word */ data_type = dspi->bytes_per_word[chip_select]; dspi->tx = msg->send_buf; dspi->rx = msg->recv_buf; dspi->wcount = msg->length / data_type; dspi->rcount = dspi->wcount; spidat1 = readl(dspi->base + SPIDAT1); clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); rt_completion_init(&(dspi->done)); if (msg->cs_take) davinci_spi_chipselect(spi, 0); if (spicfg->io_type == SPI_IO_TYPE_INTR) set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); if (msg->length > 0) { if (spicfg->io_type != SPI_IO_TYPE_DMA) { /* start the transfer */ dspi->wcount--; tx_data = dspi->get_tx(dspi); spidat1 &= 0xFFFF0000; spidat1 |= tx_data & 0xFFFF; writel(spidat1, dspi->base + SPIDAT1); } else { struct davinci_spi_dma *dma; unsigned long tx_reg, rx_reg; struct edmacc_param param; void *rx_buf; int b, c; dma = &dspi->dma; tx_reg = (unsigned long)dspi->base + SPIDAT1; rx_reg = (unsigned long)dspi->base + SPIBUF; /* * Transmit DMA setup * * If there is transmit data, map the transmit buffer, set it * as the source of data and set the source B index to data * size. If there is no transmit data, set the transmit register * as the source of data, and set the source B index to zero. * * The destination is always the transmit register itself. And * the destination never increments. */ if (msg->send_buf) { mmu_clean_dcache((rt_uint32_t)msg->send_buf, (rt_uint32_t)msg->length); } /* * If number of words is greater than 65535, then we need * to configure a 3 dimension transfer. Use the BCNTRLD * feature to allow for transfers that aren't even multiples * of 65535 (or any other possible b size) by first transferring * the remainder amount then grabbing the next N blocks of * 65535 words. */ c = dspi->wcount / (SZ_64K - 1); /* N 65535 Blocks */ b = dspi->wcount - c * (SZ_64K - 1); /* Remainder */ if (b) c++; else b = SZ_64K - 1; param.opt = TCINTEN | EDMA_TCC(dma->tx_channel); param.src = msg->send_buf ? msg->send_buf : tx_reg; param.a_b_cnt = b << 16 | data_type; param.dst = tx_reg; param.src_dst_bidx = msg->send_buf ? data_type : 0; param.link_bcntrld = 0xffffffff; param.src_dst_cidx = msg->send_buf ? data_type : 0; param.ccnt = c; edma_write_slot(dma->tx_channel, ¶m); edma_link(dma->tx_channel, dma->dummy_param_slot); /* * Receive DMA setup * * If there is receive buffer, use it to receive data. If there * is none provided, use a temporary receive buffer. Set the * destination B index to 0 so effectively only one byte is used * in the temporary buffer (address does not increment). * * The source of receive data is the receive data register. The * source address never increments. */ if (msg->recv_buf) { rx_buf = msg->recv_buf; rx_buf_count = msg->length; } else { rx_buf = dspi->rx_tmp_buf; rx_buf_count = sizeof(dspi->rx_tmp_buf); } mmu_invalidate_dcache((rt_uint32_t)rx_buf, (rt_uint32_t)rx_buf_count); param.opt = TCINTEN | EDMA_TCC(dma->rx_channel); param.src = rx_reg; param.a_b_cnt = b << 16 | data_type; param.dst = rx_buf; param.src_dst_bidx = (msg->recv_buf ? data_type : 0) << 16; param.link_bcntrld = 0xffffffff; param.src_dst_cidx = (msg->recv_buf ? data_type : 0) << 16; param.ccnt = c; edma_write_slot(dma->rx_channel, ¶m); if (dspi->cshold_bug) writew(spidat1 >> 16, dspi->base + SPIDAT1 + 2); edma_start(dma->rx_channel); edma_start(dma->tx_channel); set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); } /* Wait for the transfer to complete */ if (spicfg->io_type != SPI_IO_TYPE_POLL) { rt_completion_wait(&(dspi->done), RT_WAITING_FOREVER); } else { while (dspi->rcount > 0 || dspi->wcount > 0) { errors = davinci_spi_process_events(dspi); if (errors) break; cpu_relax(); } } } if (msg->cs_release) davinci_spi_chipselect(spi, 1); clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL); if (spicfg->io_type == SPI_IO_TYPE_DMA) { clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); } clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); /* * Check for bit error, desync error,parity error,timeout error and * receive overflow errors */ if (errors) { ret = davinci_spi_check_error(dspi, errors); rt_kprintf("%s: error reported but no error found!\n", spi->bus->parent.parent.name); return ret; } if (dspi->rcount != 0 || dspi->wcount != 0) { spi_dbg(sdev, "SPI data transfer error\n"); return -RT_EIO; } return msg->length; } /** * davinci_spi_irq - Interrupt handler for SPI Master Controller * @irq: IRQ number for this SPI Master * @context_data: structure for SPI Master controller davinci_spi * * ISR will determine that interrupt arrives either for READ or WRITE command. * According to command it will do the appropriate action. It will check * transfer length and if it is not zero then dispatch transfer command again. * If transfer length is zero then it will indicate the COMPLETION so that * davinci_spi_bufs function can go ahead. */ static void davinci_spi_irq(int irq, void *data) { struct davinci_spi *dspi = data; int status; status = davinci_spi_process_events(dspi); if (unlikely(status != 0)) clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); if ((!dspi->rcount && !dspi->wcount) || status) rt_completion_done(&dspi->done); } static int davinci_spi_request_dma(struct davinci_spi *dspi) { int r; struct davinci_spi_dma *dma = &dspi->dma; r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi, dma->eventq); if (r < 0) { rt_kprintf("Unable to request DMA channel for SPI RX\n"); r = -RT_EFULL; goto rx_dma_failed; } r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi, dma->eventq); if (r < 0) { rt_kprintf("Unable to request DMA channel for SPI TX\n"); r = -RT_EFULL; goto tx_dma_failed; } r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY); if (r < 0) { rt_kprintf("Unable to request SPI TX DMA param slot\n"); r = -RT_EFULL; goto param_failed; } dma->dummy_param_slot = r; edma_link(dma->dummy_param_slot, dma->dummy_param_slot); return 0; param_failed: edma_free_channel(dma->tx_channel); tx_dma_failed: edma_free_channel(dma->rx_channel); rx_dma_failed: return r; } static rt_err_t configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration) { return davinci_spi_setup_transfer(device, configuration); } static rt_uint32_t xfer(struct rt_spi_device *device, struct rt_spi_message *message) { return davinci_spi_bufs(device, message); }; static struct rt_spi_ops davinci_spi_ops = { configure, xfer }; static void udelay (volatile rt_uint32_t us) { volatile rt_int32_t i; for (; us > 0; us--) { i = 5000; while(i > 0) { i--; } } } void spi_pin_cfg(void) { rt_uint32_t val; val = davinci_readl(PINMUX3); val |= 0x80000000; /* SPI1 */ davinci_writel(val, PINMUX3); val = davinci_readl(PINMUX4); val &= 0xffffffc0; /* SPI1 */ val |= 0x05;//0x00000015; /* SPI1 */ davinci_writel(val, PINMUX4); } /** * davinci_spi_probe - probe function for SPI Master Controller * @pdev: platform_device structure which contains plateform specific data * * According to Linux Device Model this function will be invoked by Linux * with platform_device struct which contains the device specific info. * This function will map the SPI controller's memory, register IRQ, * Reset SPI controller and setting its registers to default value. * It will invoke spi_bitbang_start to create work queue so that client driver * can register transfer method to work queue. */ static int davinci_spi_probe(struct davinci_spi *dspi, char *spi_bus_name) { int i = 0, ret = 0; u32 spipc0; spi_pin_cfg(); psc_change_state(DAVINCI_DM365_LPSC_SPI1, PSC_ENABLE); dspi->base = DM3XX_SPI1_BASE;//spi; dspi->irq = IRQ_DM3XX_SPINT1_0; rt_hw_interrupt_install(dspi->irq, davinci_spi_irq, dspi, spi_bus_name); rt_hw_interrupt_umask(dspi->irq); dspi->clk = clk_get("SPICLK"); dspi->version = SPI_VERSION_1; dspi->chip_sel[0] = 29;//SPI_INTERN_CS; dspi->chip_sel[1] = 0;//GPIO0 dspi->dma.rx_channel = 15; dspi->dma.tx_channel = 14; dspi->dma.eventq = EVENTQ_3; ret = davinci_spi_request_dma(dspi); if (ret) goto err; rt_kprintf("%s: DMA: supported\n", spi_bus_name); rt_kprintf("%s: DMA: RX channel: %d, TX channel: %d, " "event queue: %d\n", spi_bus_name, dspi->dma.rx_channel, dspi->dma.tx_channel, dspi->dma.eventq); dspi->get_rx = davinci_spi_rx_buf_u8; dspi->get_tx = davinci_spi_tx_buf_u8; rt_completion_init(&dspi->done); /* Reset In/OUT SPI module */ writel(0, dspi->base + SPIGCR0); udelay(100); writel(1, dspi->base + SPIGCR0); /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */ spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK; writel(spipc0, dspi->base + SPIPC0); /* initialize chip selects */ for (i = 0; i < SPI_MAX_CHIPSELECT; i++) { if (dspi->chip_sel[i] != SPI_INTERN_CS) gpio_direction_output(dspi->chip_sel[i], 1); } if (0) writel(SPI_INTLVL_1, dspi->base + SPILVL); else writel(SPI_INTLVL_0, dspi->base + SPILVL); writel(CS_DEFAULT, dspi->base + SPIDEF); /* master mode default */ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK); set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK); set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); //set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);//LOOP BACK mode rt_kprintf("%s: Controller at 0x%p\n", spi_bus_name, dspi->base); dspi->parent.parent.user_data = dspi; return rt_spi_bus_register(&dspi->parent, spi_bus_name, &davinci_spi_ops); return ret; free_dma: edma_free_channel(dspi->dma.tx_channel); edma_free_channel(dspi->dma.rx_channel); edma_free_slot(dspi->dma.dummy_param_slot); err: return ret; } int rt_hw_spi_init(void) { /* register spi bus */ { static struct davinci_spi dspi; rt_memset(&dspi, 0, sizeof(dspi)); davinci_spi_probe(&dspi, "spi1"); } /* attach cs */ { static struct rt_spi_device spi_device; rt_spi_bus_attach_device(&spi_device, "spi10", "spi1", (void *)0); } { static struct rt_spi_device spi_device; rt_spi_bus_attach_device(&spi_device, "spi11", "spi1", (void *)1); } return 0; } INIT_DEVICE_EXPORT(rt_hw_spi_init);