use test;
drop table if exists t1,t2,t3,t4;
drop view if exists v1;
drop procedure if exists p1;
drop procedure if exists p2;
drop function if exists f1;
drop function if exists f2;
create table t1 (
id   char(16) not null default '',
data int not null
) engine=myisam;
create table t2 (
s   char(16),
i   int,
d   double
) engine=myisam;
drop procedure if exists foo42;
create procedure foo42()
insert into test.t1 values ("foo", 42);
call foo42();
select * from t1;
id	data
foo	42
delete from t1;
drop procedure foo42;
drop procedure if exists bar;
create procedure bar(x char(16), y int)
insert into test.t1 values (x, y);
call bar("bar", 666);
select * from t1;
id	data
bar	666
delete from t1;
drop procedure if exists `empty`|
create procedure `empty`()
begin
end|
call `empty`()|
drop procedure `empty`|
drop procedure if exists scope|
create procedure scope(a int, b float)
begin
declare b int;
declare c float;
begin
declare c int;
end;
end|
drop procedure scope|
drop procedure if exists two|
create procedure two(x1 char(16), x2 char(16), y int)
begin
insert into test.t1 values (x1, y);
insert into test.t1 values (x2, y);
end|
call two("one", "two", 3)|
select * from t1|
id	data
one	3
two	3
delete from t1|
drop procedure two|
drop procedure if exists locset|
create procedure locset(x char(16), y int)
begin
declare z1, z2 int;
set z1 = y;
set z2 = z1+2;
insert into test.t1 values (x, z2);
end|
call locset("locset", 19)|
select * from t1|
id	data
locset	21
delete from t1|
drop procedure locset|
drop procedure if exists setcontext|
create procedure setcontext()
begin
declare data int default 2;
insert into t1 (id, data) values ("foo", 1);
replace t1 set data = data, id = "bar";
update t1 set id = "kaka", data = 3 where t1.data = data;
end|
call setcontext()|
select * from t1 order by data|
id	data
foo	1
kaka	3
delete from t1|
drop procedure setcontext|
create table t3 ( d date, i int, f double, s varchar(32) )|
drop procedure if exists nullset|
create procedure nullset()
begin
declare ld date;
declare li int;
declare lf double;
declare ls varchar(32);
set ld = null, li = null, lf = null, ls = null;
insert into t3 values (ld, li, lf, ls);
insert into t3 (i, f, s) values ((ld is null), 1,    "ld is null"),
((li is null), 1,    "li is null"),
((li = 0),     null, "li = 0"),
((lf is null), 1,    "lf is null"),
((lf = 0),     null, "lf = 0"),
((ls is null), 1,    "ls is null");
end|
call nullset()|
select * from t3|
d	i	f	s
NULL	NULL	NULL	NULL
NULL	1	1	ld is null
NULL	1	1	li is null
NULL	NULL	NULL	li = 0
NULL	1	1	lf is null
NULL	NULL	NULL	lf = 0
NULL	1	1	ls is null
drop table t3|
drop procedure nullset|
drop procedure if exists mixset|
create procedure mixset(x char(16), y int)
begin
declare z int;
set @z = y, z = 666;
insert into test.t1 values (x, z);
end|
call mixset("mixset", 19)|
show variables like 'max_join_size'|
Variable_name	Value
max_join_size	18446744073709551615
select id,data,@z from t1|
id	data	@z
mixset	666	19
delete from t1|
drop procedure mixset|
drop procedure if exists zip|
create procedure zip(x char(16), y int)
begin
declare z int;
call zap(y, z);
call bar(x, z);
end|
drop procedure if exists zap|
create procedure zap(x int, out y int)
begin
declare z int;
set z = x+1, y = z;
end|
call zip("zip", 99)|
select * from t1|
id	data
zip	100
delete from t1|
drop procedure zip|
drop procedure bar|
call zap(7, @zap)|
select @zap|
@zap
8
drop procedure zap|
drop procedure if exists c1|
create procedure c1(x int)
call c2("c", x)|
drop procedure if exists c2|
create procedure c2(s char(16), x int)
call c3(x, s)|
drop procedure if exists c3|
create procedure c3(x int, s char(16))
call c4("level", x, s)|
drop procedure if exists c4|
create procedure c4(l char(8), x int, s char(16))
insert into t1 values (concat(l,s), x)|
call c1(42)|
select * from t1|
id	data
levelc	42
delete from t1|
drop procedure c1|
drop procedure c2|
drop procedure c3|
drop procedure c4|
drop procedure if exists iotest|
create procedure iotest(x1 char(16), x2 char(16), y int)
begin
call inc2(x2, y);
insert into test.t1 values (x1, y);
end|
drop procedure if exists inc2|
create procedure inc2(x char(16), y int)
begin
call inc(y);
insert into test.t1 values (x, y);
end|
drop procedure if exists inc|
create procedure inc(inout io int)
set io = io + 1|
call iotest("io1", "io2", 1)|
select * from t1 order by data desc|
id	data
io2	2
io1	1
delete from t1|
drop procedure iotest|
drop procedure inc2|
drop procedure if exists incr|
create procedure incr(inout x int)
call inc(x)|
select @zap|
@zap
8
call incr(@zap)|
select @zap|
@zap
9
drop procedure inc|
drop procedure incr|
drop procedure if exists cbv1|
create procedure cbv1()
begin
declare y int default 3;
call cbv2(y+1, y);
insert into test.t1 values ("cbv1", y);
end|
drop procedure if exists cbv2|
create procedure cbv2(y1 int, inout y2 int)
begin
set y2 = 4711;
insert into test.t1 values ("cbv2", y1);
end|
call cbv1()|
select * from t1 order by data|
id	data
cbv2	4
cbv1	4711
delete from t1|
drop procedure cbv1|
drop procedure cbv2|
insert into t2 values ("a", 1, 1.1), ("b", 2, 1.2), ("c", 3, 1.3)|
drop procedure if exists sub1|
create procedure sub1(id char(16), x int)
insert into test.t1 values (id, x)|
drop procedure if exists sub2|
create procedure sub2(id char(16))
begin
declare x int;
set x = (select sum(t.i) from test.t2 t);
insert into test.t1 values (id, x);
end|
drop procedure if exists sub3|
create function sub3(i int) returns int deterministic
return i+1|
call sub1("sub1a", (select 7))|
call sub1("sub1b", (select max(i) from t2))|
call sub1("sub1c", (select i,d from t2 limit 1))|
ERROR 21000: Operand should contain 1 column(s)
call sub1("sub1d", (select 1 from (select 1) a))|
call sub2("sub2")|
select * from t1 order by id|
id	data
sub1a	7
sub1b	3
sub1d	1
sub2	6
select sub3((select max(i) from t2))|
sub3((select max(i) from t2))
4
drop procedure sub1|
drop procedure sub2|
drop function sub3|
delete from t1|
delete from t2|
drop procedure if exists a0|
create procedure a0(x int)
while x do
set x = x-1;
insert into test.t1 values ("a0", x);
end while|
call a0(3)|
select * from t1 order by data desc|
id	data
a0	2
a0	1
a0	0
delete from t1|
drop procedure a0|
drop procedure if exists a|
create procedure a(x int)
while x > 0 do
set x = x-1;
insert into test.t1 values ("a", x);
end while|
call a(3)|
select * from t1 order by data desc|
id	data
a	2
a	1
a	0
delete from t1|
drop procedure a|
drop procedure if exists b|
create procedure b(x int)
repeat
insert into test.t1 values (repeat("b",3), x);
set x = x-1;
until x = 0 end repeat|
call b(3)|
select * from t1 order by data desc|
id	data
bbb	3
bbb	2
bbb	1
delete from t1|
drop procedure b|
drop procedure if exists b2|
create procedure b2(x int)
repeat
select 1 into outfile 'b2';
insert into test.t1 values (repeat("b2",3), x);
set x = x-1;
until x = 0 end repeat|
drop procedure b2|
drop procedure if exists c|
create procedure c(x int)
hmm: while x > 0 do
insert into test.t1 values ("c", x);
set x = x-1;
iterate hmm;
insert into test.t1 values ("x", x);
end while hmm|
call c(3)|
select * from t1 order by data desc|
id	data
c	3
c	2
c	1
delete from t1|
drop procedure c|
drop procedure if exists d|
create procedure d(x int)
hmm: while x > 0 do
insert into test.t1 values ("d", x);
set x = x-1;
leave hmm;
insert into test.t1 values ("x", x);
end while|
call d(3)|
select * from t1|
id	data
d	3
delete from t1|
drop procedure d|
drop procedure if exists e|
create procedure e(x int)
foo: loop
if x = 0 then
leave foo;
end if;
insert into test.t1 values ("e", x);
set x = x-1;
end loop foo|
call e(3)|
select * from t1 order by data desc|
id	data
e	3
e	2
e	1
delete from t1|
drop procedure e|
drop procedure if exists f|
create procedure f(x int)
if x < 0 then
insert into test.t1 values ("f", 0);
elseif x = 0 then
insert into test.t1 values ("f", 1);
else
insert into test.t1 values ("f", 2);
end if|
call f(-2)|
call f(0)|
call f(4)|
select * from t1 order by data|
id	data
f	0
f	1
f	2
delete from t1|
drop procedure f|
drop procedure if exists g|
create procedure g(x int)
case
when x < 0 then
insert into test.t1 values ("g", 0);
when x = 0 then
insert into test.t1 values ("g", 1);
else
insert into test.t1 values ("g", 2);
end case|
call g(-42)|
call g(0)|
call g(1)|
select * from t1 order by data|
id	data
g	0
g	1
g	2
delete from t1|
drop procedure g|
drop procedure if exists h|
create procedure h(x int)
case x
when 0 then
insert into test.t1 values ("h0", x);
when 1 then
insert into test.t1 values ("h1", x);
else
insert into test.t1 values ("h?", x);
end case|
call h(0)|
call h(1)|
call h(17)|
select * from t1 order by data|
id	data
h0	0
h1	1
h?	17
delete from t1|
drop procedure h|
drop procedure if exists i|
create procedure i(x int)
foo:
begin
if x = 0 then
leave foo;
end if;
insert into test.t1 values ("i", x);
end foo|
call i(0)|
call i(3)|
select * from t1|
id	data
i	3
delete from t1|
drop procedure i|
insert into t1 values ("foo", 3), ("bar", 19)|
insert into t2 values ("x", 9, 4.1), ("y", -1, 19.2), ("z", 3, 2.2)|
drop procedure if exists sel1|
create procedure sel1()
begin
select * from t1 order by data;
end|
call sel1()|
id	data
foo	3
bar	19
drop procedure sel1|
drop procedure if exists sel2|
create procedure sel2()
begin
select * from t1 order by data;
select * from t2 order by s;
end|
call sel2()|
id	data
foo	3
bar	19
s	i	d
x	9	4.1
y	-1	19.2
z	3	2.2
drop procedure sel2|
delete from t1|
delete from t2|
drop procedure if exists into_test|
create procedure into_test(x char(16), y int)
begin
insert into test.t1 values (x, y);
select id,data into x,y from test.t1 limit 1;
insert into test.t1 values (concat(x, "2"), y+2);
end|
call into_test("into", 100)|
select * from t1 order by data|
id	data
into	100
into2	102
delete from t1|
drop procedure into_test|
drop procedure if exists into_tes2|
create procedure into_test2(x char(16), y int)
begin
insert into test.t1 values (x, y);
select id,data into x,@z from test.t1 limit 1;
insert into test.t1 values (concat(x, "2"), y+2);
end|
call into_test2("into", 100)|
select id,data,@z from t1 order by data|
id	data	@z
into	100	100
into2	102	100
delete from t1|
drop procedure into_test2|
drop procedure if exists into_test3|
create procedure into_test3()
begin
declare x char(16);
declare y int;
select * into x,y from test.t1 limit 1;
insert into test.t2 values (x, y, 0.0);
end|
insert into t1 values ("into3", 19)|
call into_test3()|
call into_test3()|
select * from t2|
s	i	d
into3	19	0
into3	19	0
delete from t1|
delete from t2|
drop procedure into_test3|
drop procedure if exists into_test4|
create procedure into_test4()
begin
declare x int;
select data into x from test.t1 limit 1;
insert into test.t3 values ("into4", x);
end|
delete from t1|
create table t3 ( s char(16), d int)|
call into_test4()|
select * from t3|
s	d
into4	NULL
insert into t1 values ("i4", 77)|
call into_test4()|
select * from t3|
s	d
into4	NULL
into4	77
delete from t1|
drop table t3|
drop procedure into_test4|
drop procedure if exists into_outfile|
create procedure into_outfile(x char(16), y int)
begin
insert into test.t1 values (x, y);
select * into outfile "MYSQLTEST_VARDIR/tmp/spout" from test.t1;
insert into test.t1 values (concat(x, "2"), y+2);
end|
call into_outfile("ofile", 1)|
delete from t1|
drop procedure into_outfile|
drop procedure if exists into_dumpfile|
create procedure into_dumpfile(x char(16), y int)
begin
insert into test.t1 values (x, y);
select * into dumpfile "MYSQLTEST_VARDIR/tmp/spdump" from test.t1 limit 1;
insert into test.t1 values (concat(x, "2"), y+2);
end|
call into_dumpfile("dfile", 1)|
delete from t1|
drop procedure into_dumpfile|
drop procedure if exists create_select|
create procedure create_select(x char(16), y int)
begin
insert into test.t1 values (x, y);
create temporary table test.t3 select * from test.t1;
insert into test.t3 values (concat(x, "2"), y+2);
end|
call create_select("cs", 90)|
select * from t1, t3|
id	data	id	data
cs	90	cs	90
cs	90	cs2	92
drop table t3|
delete from t1|
drop procedure create_select|
drop function if exists e|
create function e() returns double
return 2.7182818284590452354|
set @e = e()|
select e(), @e|
e()	@e
2.718281828459045	2.718281828459045
drop function if exists inc|
create function inc(i int) returns int
return i+1|
select inc(1), inc(99), inc(-71)|
inc(1)	inc(99)	inc(-71)
2	100	-70
drop function if exists mul|
create function mul(x int, y int) returns int
return x*y|
select mul(1,1), mul(3,5), mul(4711, 666)|
mul(1,1)	mul(3,5)	mul(4711, 666)
1	15	3137526
drop function if exists append|
create function append(s1 char(8), s2 char(8)) returns char(16)
return concat(s1, s2)|
select append("foo", "bar")|
append("foo", "bar")
foobar
drop function if exists fac|
create function fac(n int unsigned) returns bigint unsigned
begin
declare f bigint unsigned default 1;
while n > 1 do
set f = f * n;
set n = n - 1;
end while;
return f;
end|
select fac(1), fac(2), fac(5), fac(10)|
fac(1)	fac(2)	fac(5)	fac(10)
1	2	120	3628800
drop function if exists fun|
create function fun(d double, i int, u int unsigned) returns double
return mul(inc(i), fac(u)) / e()|
select fun(2.3, 3, 5)|
fun(2.3, 3, 5)
176.58213176229233
insert into t2 values (append("xxx", "yyy"), mul(4,3), e())|
insert into t2 values (append("a", "b"), mul(2,mul(3,4)), fun(1.7, 4, 6))|
select * from t2 where s = append("a", "b")|
s	i	d
ab	24	1324.3659882171924
select * from t2 where i = mul(4,3) or i = mul(mul(3,4),2) order by i|
s	i	d
xxxyyy	12	2.718281828459045
ab	24	1324.3659882171924
select * from t2 where d = e()|
s	i	d
xxxyyy	12	2.718281828459045
select * from t2 order by i|
s	i	d
xxxyyy	12	2.718281828459045
ab	24	1324.3659882171924
delete from t2|
drop function e|
drop function inc|
drop function mul|
drop function append|
drop function fun|
drop procedure if exists hndlr1|
create procedure hndlr1(val int)
begin
declare x int default 0;
declare foo condition for 1136;
declare bar condition for sqlstate '42S98';        # Just for testing syntax
declare zip condition for sqlstate value '42S99';  # Just for testing syntax
declare continue handler for foo set x = 1;
insert into test.t1 values ("hndlr1", val, 2);  # Too many values
if (x) then
insert into test.t1 values ("hndlr1", val);   # This instead then
end if;
end|
call hndlr1(42)|
select * from t1|
id	data
hndlr1	42
delete from t1|
drop procedure hndlr1|
drop procedure if exists hndlr2|
create procedure hndlr2(val int)
begin
declare x int default 0;
begin
declare exit handler for sqlstate '21S01' set x = 1;
insert into test.t1 values ("hndlr2", val, 2); # Too many values
end;
insert into test.t1 values ("hndlr2", x);
end|
call hndlr2(42)|
select * from t1|
id	data
hndlr2	1
delete from t1|
drop procedure hndlr2|
drop procedure if exists hndlr3|
create procedure hndlr3(val int)
begin
declare x int default 0;
declare continue handler for sqlexception        # Any error
begin
declare z int;
set z = 2 * val;
set x = 1;
end;
if val < 10 then
begin
declare y int;
set y = val + 10;
insert into test.t1 values ("hndlr3", y, 2);  # Too many values
if x then
insert into test.t1 values ("hndlr3", y);
end if;
end;
end if;
end|
call hndlr3(3)|
select * from t1|
id	data
hndlr3	13
delete from t1|
drop procedure hndlr3|
create table t3 ( id   char(16), data int )|
drop procedure if exists hndlr4|
create procedure hndlr4()
begin
declare x int default 0;
declare val int;	                           # No default
declare continue handler for sqlstate '02000' set x=1;
select data into val from test.t3 where id='z' limit 1;  # No hits
insert into test.t3 values ('z', val);
end|
call hndlr4()|
select * from t3|
id	data
z	NULL
drop table t3|
drop procedure hndlr4|
drop procedure if exists cur1|
create procedure cur1()
begin
declare a char(16);
declare b int;
declare c double;
declare done int default 0;
declare c cursor for select * from test.t2;
declare continue handler for sqlstate '02000' set done = 1;
open c;
repeat
fetch c into a, b, c;
if not done then
insert into test.t1 values (a, b+c);
end if;
until done end repeat;
close c;
end|
insert into t2 values ("foo", 42, -1.9), ("bar", 3, 12.1), ("zap", 666, -3.14)|
call cur1()|
select * from t1|
id	data
foo	40
bar	15
zap	663
drop procedure cur1|
create table t3 ( s char(16), i int )|
drop procedure if exists cur2|
create procedure cur2()
begin
declare done int default 0;
declare c1 cursor for select id,data from test.t1 order by id,data;
declare c2 cursor for select i from test.t2 order by i;
declare continue handler for sqlstate '02000' set done = 1;
open c1;
open c2;
repeat
begin
declare a char(16);
declare b,c int;
fetch from c1 into a, b;
fetch next from c2 into c;
if not done then
if b < c then
insert into test.t3 values (a, b);
else
insert into test.t3 values (a, c);
end if;
end if;
end;
until done end repeat;
close c1;
close c2;
end|
call cur2()|
select * from t3 order by i,s|
s	i
bar	3
foo	40
zap	663
delete from t1|
delete from t2|
drop table t3|
drop procedure cur2|
drop procedure if exists chistics|
create procedure chistics()
language sql
modifies sql data
not deterministic
sql security definer
comment 'Characteristics procedure test'
  insert into t1 values ("chistics", 1)|
show create procedure chistics|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
chistics	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION	CREATE DEFINER=`root`@`localhost` PROCEDURE `chistics`()
    MODIFIES SQL DATA
    COMMENT 'Characteristics procedure test'
insert into t1 values ("chistics", 1)	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call chistics()|
select * from t1|
id	data
chistics	1
delete from t1|
alter procedure chistics sql security invoker|
show create procedure chistics|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
chistics	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION	CREATE DEFINER=`root`@`localhost` PROCEDURE `chistics`()
    MODIFIES SQL DATA
    SQL SECURITY INVOKER
    COMMENT 'Characteristics procedure test'
insert into t1 values ("chistics", 1)	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure chistics|
drop function if exists chistics|
create function chistics() returns int
language sql
deterministic
sql security invoker
comment 'Characteristics procedure test'
  return 42|
show create function chistics|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
chistics	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION	CREATE DEFINER=`root`@`localhost` FUNCTION `chistics`() RETURNS int(11)
    DETERMINISTIC
    SQL SECURITY INVOKER
    COMMENT 'Characteristics procedure test'
return 42	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
select chistics()|
chistics()
42
alter function chistics
no sql
comment 'Characteristics function test'|
show create function chistics|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
chistics	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION	CREATE DEFINER=`root`@`localhost` FUNCTION `chistics`() RETURNS int(11)
    NO SQL
    DETERMINISTIC
    SQL SECURITY INVOKER
    COMMENT 'Characteristics function test'
return 42	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop function chistics|
insert into t1 values ("foo", 1), ("bar", 2), ("zip", 3)|
set @@sql_mode = 'ANSI'|
drop procedure if exists modes$
create procedure modes(out c1 int, out c2 int)
begin
declare done int default 0;
declare x int;
declare c cursor for select data from t1;
declare continue handler for sqlstate '02000' set done = 1;
select 1 || 2 into c1;
set c2 = 0;
open c;
repeat
fetch c into x;
if not done then
set c2 = c2 + 1;
end if;
until done end repeat;
close c;
end$
set @@sql_mode = ''|
set sql_select_limit = 1|
call modes(@c1, @c2)|
set sql_select_limit = default|
select @c1, @c2|
@c1	@c2
12	3
delete from t1|
drop procedure modes|
create database sp_db1|
drop database sp_db1|
create database sp_db2|
use sp_db2|
create table t3 ( s char(4), t int )|
insert into t3 values ("abcd", 42), ("dcba", 666)|
use test|
drop database sp_db2|
create database sp_db3|
use sp_db3|
drop procedure if exists dummy|
create procedure dummy(out x int)
set x = 42|
use test|
drop database sp_db3|
select routine_type, routine_schema, routine_name from information_schema.routines where routine_schema = 'sp_db3'|
ROUTINE_TYPE	ROUTINE_SCHEMA	ROUTINE_NAME
drop procedure if exists rc|
create procedure rc()
begin
delete from t1;
insert into t1 values ("a", 1), ("b", 2), ("c", 3);
end|
call rc()|
select row_count()|
row_count()
3
update t1 set data=42 where id = "b";
select row_count()|
row_count()
1
delete from t1|
select row_count()|
row_count()
3
delete from t1|
select row_count()|
row_count()
0
select * from t1|
id	data
select row_count()|
row_count()
-1
drop procedure rc|
drop function if exists f0|
drop function if exists f1|
drop function if exists f2|
drop function if exists f3|
drop function if exists f4|
drop function if exists f5|
drop function if exists f6|
drop function if exists f7|
drop function if exists f8|
drop function if exists f9|
drop function if exists f10|
drop function if exists f11|
drop function if exists f12_1|
drop function if exists f12_2|
drop view if exists v0|
drop view if exists v1|
drop view if exists v2|
delete from t1|
delete from t2|
insert into t1 values ("a", 1), ("b", 2) |
insert into t2 values ("a", 1, 1.0), ("b", 2, 2.0), ("c", 3, 3.0) |
create function f1() returns int
return (select sum(data) from t1)|
select f1()|
f1()
3
select id, f1() from t1 order by id|
id	f1()
a	3
b	3
create function f2() returns int
return (select data from t1 where data <= (select sum(data) from t1) order by data limit 1)|
select f2()|
f2()
1
select id, f2() from t1 order by id|
id	f2()
a	1
b	1
create function f3() returns int
begin
declare n int;
declare m int;
set n:= (select min(data) from t1);
set m:= (select max(data) from t1);
return n < m;
end|
select f3()|
f3()
1
select id, f3() from t1 order by id|
id	f3()
a	1
b	1
select f1(), f3()|
f1()	f3()
3	1
select id, f1(), f3() from t1 order by id|
id	f1()	f3()
a	3	1
b	3	1
create function f4() returns double 
return (select d from t1, t2 where t1.data = t2.i and t1.id= "b")|
select f4()|
f4()
2
select s, f4() from t2 order by s|
s	f4()
a	2
b	2
c	2
create function f5(i int) returns int
begin
if i <= 0 then
return 0;
elseif i = 1  then
return (select count(*) from t1 where data = i);
else
return (select count(*) + f5( i - 1) from t1 where data = i);
end if;
end|
select f5(1)|
f5(1)
1
select f5(2)|
ERROR HY000: Recursive stored functions and triggers are not allowed.
select f5(3)|
ERROR HY000: Recursive stored functions and triggers are not allowed.
create function f6() returns int
begin
declare n int;
set n:= f1();
return (select count(*) from t1 where data <= f7() and data <= n);
end|
create function f7() returns int
return (select sum(data) from t1 where data <= f1())|
select f6()|
f6()
2
select id, f6() from t1 order by id|
id	f6()
a	2
b	2
create view v1 (a) as select f1()|
select * from v1|
a
3
select id, a from t1, v1 order by id|
id	a
a	3
b	3
select * from v1, v1 as v|
a	a
3	3
create view v2 (a) as select a*10 from v1|
select * from v2|
a
30
select id, a from t1, v2 order by id|
id	a
a	30
b	30
select * from v1, v2|
a	a
3	30
create function f8 () returns int
return (select count(*) from v2)|
select *, f8() from v1|
a	f8()
3	1
drop function f1|
select * from v1|
ERROR HY000: View 'test.v1' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
create function f1() returns int
return (select sum(data) from t1) + (select sum(data) from v1)|
select f1()|
ERROR HY000: Recursive stored functions and triggers are not allowed.
select * from v1|
ERROR HY000: Recursive stored functions and triggers are not allowed.
select * from v2|
ERROR HY000: Recursive stored functions and triggers are not allowed.
drop function f1|
create function f1() returns int
return (select sum(data) from t1)|
create function f0() returns int
return (select * from (select 100) as r)|
select f0()|
f0()
100
select *, f0() from (select 1) as t|
1	f0()
1	100
create view v0 as select f0()|
select * from v0|
f0()
100
select *, f0() from v0|
f0()	f0()
100	100
lock tables t1 read, t1 as t11 read|
select f3()|
f3()
1
select id, f3() from t1 as t11 order by id|
id	f3()
a	1
b	1
select f0()|
f0()
100
select * from v0|
ERROR HY000: Table 'v0' was not locked with LOCK TABLES
select *, f0() from v0, (select 123) as d1|
ERROR HY000: Table 'v0' was not locked with LOCK TABLES
select id, f3() from t1|
ERROR HY000: Table 't1' was not locked with LOCK TABLES
select f4()|
ERROR HY000: Table 't2' was not locked with LOCK TABLES
unlock tables|
create function f9() returns int
begin
declare a, b int;
drop temporary table if exists t3;
create temporary table t3 (id int);
insert into t3 values (1), (2), (3);
set a:= (select count(*) from t3);
set b:= (select count(*) from t3 t3_alias);
return a + b;
end|
select f9()|
f9()
6
select f9() from t1 limit 1|
f9()
6
create function f10() returns int
begin
drop temporary table if exists t3;
create temporary table t3 (id int);
insert into t3 select id from t4;
return (select count(*) from t3);
end|
select f10()|
ERROR 42S02: Table 'test.t4' doesn't exist
create table t4 as select 1 as id|
select f10()|
f10()
1
create function f11() returns int
begin
drop temporary table if exists t3;
create temporary table t3 (id int);
insert into t3 values (1), (2), (3);
return (select count(*) from t3 as a, t3 as b);
end|
select f11()|
ERROR HY000: Can't reopen table: 'a'
select f11() from t1|
ERROR HY000: Can't reopen table: 'a'
create function f12_1() returns int
begin
drop temporary table if exists t3;
create temporary table t3 (id int);
insert into t3 values (1), (2), (3);
return f12_2();
end|
create function f12_2() returns int
return (select count(*) from t3)|
drop temporary table t3|
select f12_1()|
f12_1()
3
select f12_1() from t1 limit 1|
f12_1()
3
drop function f0|
drop function f1|
drop function f2|
drop function f3|
drop function f4|
drop function f5|
drop function f6|
drop function f7|
drop function f8|
drop function f9|
drop function f10|
drop function f11|
drop function f12_1|
drop function f12_2|
drop view v0|
drop view v1|
drop view v2|
truncate table t1 |
truncate table t2 |
drop table t4|
drop table if exists t3|
create table t3 (n int unsigned not null primary key, f bigint unsigned)|
drop procedure if exists ifac|
create procedure ifac(n int unsigned)
begin
declare i int unsigned default 1;
if n > 20 then
set n = 20;		# bigint overflow otherwise
end if;
while i <= n do
begin
insert into test.t3 values (i, fac(i));
set i = i + 1;
end;
end while;
end|
call ifac(20)|
select * from t3|
n	f
1	1
2	2
3	6
4	24
5	120
6	720
7	5040
8	40320
9	362880
10	3628800
11	39916800
12	479001600
13	6227020800
14	87178291200
15	1307674368000
16	20922789888000
17	355687428096000
18	6402373705728000
19	121645100408832000
20	2432902008176640000
drop table t3|
show function status like '%fac'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	fac	FUNCTION	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure ifac|
drop function fac|
show function status like '%fac'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
drop table if exists t3|
create table t3 (
i int unsigned not null primary key,
p bigint unsigned not null
)|
insert into t3 values
( 0,   3), ( 1,   5), ( 2,   7), ( 3,  11), ( 4,  13),
( 5,  17), ( 6,  19), ( 7,  23), ( 8,  29), ( 9,  31),
(10,  37), (11,  41), (12,  43), (13,  47), (14,  53),
(15,  59), (16,  61), (17,  67), (18,  71), (19,  73),
(20,  79), (21,  83), (22,  89), (23,  97), (24, 101),
(25, 103), (26, 107), (27, 109), (28, 113), (29, 127),
(30, 131), (31, 137), (32, 139), (33, 149), (34, 151),
(35, 157), (36, 163), (37, 167), (38, 173), (39, 179),
(40, 181), (41, 191), (42, 193), (43, 197), (44, 199)|
drop procedure if exists opp|
create procedure opp(n bigint unsigned, out pp bool)
begin
declare r double;
declare b, s bigint unsigned default 0;
set r = sqrt(n);
again:
loop
if s = 45 then
set b = b+200, s = 0;
else
begin
declare p bigint unsigned;
select t.p into p from test.t3 t where t.i = s;
if b+p > r then
set pp = 1;
leave again;
end if;
if mod(n, b+p) = 0 then
set pp = 0;
leave again;
end if;
set s = s+1;
end;
end if;
end loop;
end|
drop procedure if exists ip|
create procedure ip(m int unsigned)
begin
declare p bigint unsigned;
declare i int unsigned;
set i=45, p=201;
while i < m do
begin
declare pp bool default 0;
call opp(p, pp);
if pp then
insert into test.t3 values (i, p);
set i = i+1;
end if;
set p = p+2;
end;
end while;
end|
show create procedure opp|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
opp		CREATE DEFINER=`root`@`localhost` PROCEDURE `opp`(n bigint unsigned, out pp bool)
begin
declare r double;
declare b, s bigint unsigned default 0;
set r = sqrt(n);
again:
loop
if s = 45 then
set b = b+200, s = 0;
else
begin
declare p bigint unsigned;
select t.p into p from test.t3 t where t.i = s;
if b+p > r then
set pp = 1;
leave again;
end if;
if mod(n, b+p) = 0 then
set pp = 0;
leave again;
end if;
set s = s+1;
end;
end if;
end loop;
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show procedure status where name like '%p%' and db='test'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	ip	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
test	opp	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call ip(200)|
select * from t3 where i=45 or i=100 or i=199|
i	p
45	211
100	557
199	1229
drop table t3|
drop procedure opp|
drop procedure ip|
show procedure status where name like '%p%' and db='test'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
drop procedure if exists bar|
create procedure bar(x char(16), y int)
comment "111111111111" sql security invoker
insert into test.t1 values (x, y)|
show procedure status like 'bar'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	bar	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	INVOKER	111111111111	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
alter procedure bar comment "2222222222" sql security definer|
alter procedure bar comment "3333333333"|
alter procedure bar|
show create procedure bar|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bar		CREATE DEFINER=`root`@`localhost` PROCEDURE `bar`(x char(16), y int)
    COMMENT '3333333333'
insert into test.t1 values (x, y)	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show procedure status like 'bar'|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	bar	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER	3333333333	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure bar|
drop procedure if exists p1|
create procedure p1 ()
select (select s1 from t3) from t3|
create table t3 (s1 int)|
call p1()|
(select s1 from t3)
insert into t3 values (1)|
call p1()|
(select s1 from t3)
1
drop procedure p1|
drop table t3|
drop function if exists foo|
create function `foo` () returns int
return 5|
select `foo` ()|
`foo` ()
5
drop function `foo`|
drop function if exists t1max|
create function t1max() returns int
begin
declare x int;
select max(data) into x from t1;
return x;
end|
insert into t1 values ("foo", 3), ("bar", 2), ("zip", 5), ("zap", 1)|
select t1max()|
t1max()
5
drop function t1max|
create table t3 (
v char(16) not null primary key,
c int unsigned not null
)|
create function getcount(s char(16)) returns int
begin
declare x int;
select count(*) into x from t3 where v = s;
if x = 0 then
insert into t3 values (s, 1);
else
update t3 set c = c+1 where v = s;
end if;
return x;
end|
select * from t1 where data = getcount("bar")|
id	data
zap	1
select * from t3|
v	c
bar	4
select getcount("zip")|
getcount("zip")
0
select getcount("zip")|
getcount("zip")
1
select * from t3|
v	c
bar	4
zip	2
select getcount(id) from t1 where data = 3|
getcount(id)
0
select getcount(id) from t1 where data = 5|
getcount(id)
1
select * from t3|
v	c
bar	4
foo	1
zip	3
drop table t3|
drop function getcount|
drop table if exists t3|
drop procedure if exists h_ee|
drop procedure if exists h_es|
drop procedure if exists h_en|
drop procedure if exists h_ew|
drop procedure if exists h_ex|
drop procedure if exists h_se|
drop procedure if exists h_ss|
drop procedure if exists h_sn|
drop procedure if exists h_sw|
drop procedure if exists h_sx|
drop procedure if exists h_ne|
drop procedure if exists h_ns|
drop procedure if exists h_nn|
drop procedure if exists h_we|
drop procedure if exists h_ws|
drop procedure if exists h_ww|
drop procedure if exists h_xe|
drop procedure if exists h_xs|
drop procedure if exists h_xx|
create table t3 (a smallint primary key)|
insert into t3 (a) values (1)|
create procedure h_ee()
deterministic
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Outer (bad)' as 'h_ee';
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Inner (good)' as 'h_ee';
insert into t3 values (1);
end;
end|
create procedure h_es()
deterministic
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Outer (bad)' as 'h_es';
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000'
      select 'Inner (good)' as 'h_es';
insert into t3 values (1);
end;
end|
create procedure h_en()
deterministic
begin
declare continue handler for 1329 -- ER_SP_FETCH_NO_DATA
select 'Outer (bad)' as 'h_en';
begin
declare x int;
declare continue handler for sqlstate '02000' -- no data
select 'Inner (good)' as 'h_en';
select a into x from t3 where a = 42;
end;
end|
create procedure h_ew()
deterministic
begin
declare continue handler for 1264 -- ER_WARN_DATA_OUT_OF_RANGE
select 'Outer (bad)' as 'h_ew';
begin
declare continue handler for sqlwarning
select 'Inner (good)' as 'h_ew';
insert into t3 values (123456789012);
end;
delete from t3;
insert into t3 values (1);
end|
create procedure h_ex()
deterministic
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Outer (bad)' as 'h_ex';
begin
declare continue handler for sqlexception
select 'Inner (good)' as 'h_ex';
insert into t3 values (1);
end;
end|
create procedure h_se()
deterministic
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000' 
select 'Outer (bad)' as 'h_se';
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Inner (good)' as 'h_se';
insert into t3 values (1);
end;
end|
create procedure h_ss()
deterministic
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000' 
select 'Outer (bad)' as 'h_ss';
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000' 
select 'Inner (good)' as 'h_ss';
insert into t3 values (1);
end;
end|
create procedure h_sn()
deterministic
begin
-- Note: '02000' is more specific than NOT FOUND ;
--       there might be other not found states 
declare continue handler for sqlstate '02000' -- no data
select 'Outer (bad)' as 'h_sn';
begin
declare x int;
declare continue handler for not found
select 'Inner (good)' as 'h_sn';
select a into x from t3 where a = 42;
end;
end|
create procedure h_sw()
deterministic
begin
-- data exception - numeric value out of range
declare continue handler for sqlstate '22003'
    select 'Outer (bad)' as 'h_sw';
begin
declare continue handler for sqlwarning
select 'Inner (good)' as 'h_sw';
insert into t3 values (123456789012);
end;
delete from t3;
insert into t3 values (1);
end|
create procedure h_sx()
deterministic
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000' 
select 'Outer (bad)' as 'h_sx';
begin
declare continue handler for sqlexception
select 'Inner (good)' as 'h_sx';
insert into t3 values (1);
end;
end|
create procedure h_ne()
deterministic
begin
declare continue handler for not found
select 'Outer (bad)' as 'h_ne';
begin
declare x int;
declare continue handler for 1329 -- ER_SP_FETCH_NO_DATA
select 'Inner (good)' as 'h_ne';
select a into x from t3 where a = 42;
end;
end|
create procedure h_ns()
deterministic
begin
declare continue handler for not found
select 'Outer (bad)' as 'h_ns';
begin
declare x int;
declare continue handler for sqlstate '02000' -- no data
select 'Inner (good)' as 'h_ns';
select a into x from t3 where a = 42;
end;
end|
create procedure h_nn()
deterministic
begin
declare continue handler for not found
select 'Outer (bad)' as 'h_nn';
begin
declare x int;
declare continue handler for not found
select 'Inner (good)' as 'h_nn';
select a into x from t3 where a = 42;
end;
end|
create procedure h_we()
deterministic
begin
declare continue handler for sqlwarning
select 'Outer (bad)' as 'h_we';
begin
declare continue handler for 1264 -- ER_WARN_DATA_OUT_OF_RANGE
select 'Inner (good)' as 'h_we';
insert into t3 values (123456789012);
end;
delete from t3;
insert into t3 values (1);
end|
create procedure h_ws()
deterministic
begin
declare continue handler for sqlwarning
select 'Outer (bad)' as 'h_ws';
begin
-- data exception - numeric value out of range
declare continue handler for sqlstate '22003'
      select 'Inner (good)' as 'h_ws';
insert into t3 values (123456789012);
end;
delete from t3;
insert into t3 values (1);
end|
create procedure h_ww()
deterministic
begin
declare continue handler for sqlwarning
select 'Outer (bad)' as 'h_ww';
begin
declare continue handler for sqlwarning
select 'Inner (good)' as 'h_ww';
insert into t3 values (123456789012);
end;
delete from t3;
insert into t3 values (1);
end|
create procedure h_xe()
deterministic
begin
declare continue handler for sqlexception
select 'Outer (bad)' as 'h_xe';
begin
declare continue handler for 1062 -- ER_DUP_ENTRY
select 'Inner (good)' as 'h_xe';
insert into t3 values (1);
end;
end|
create procedure h_xs()
deterministic
begin
declare continue handler for sqlexception
select 'Outer (bad)' as 'h_xs';
begin
-- integrity constraint violation
declare continue handler for sqlstate '23000'
      select 'Inner (good)' as 'h_xs';
insert into t3 values (1);
end;
end|
create procedure h_xx()
deterministic
begin
declare continue handler for sqlexception
select 'Outer (bad)' as 'h_xx';
begin
declare continue handler for sqlexception
select 'Inner (good)' as 'h_xx';
insert into t3 values (1);
end;
end|
call h_ee()|
h_ee
Inner (good)
call h_es()|
h_es
Inner (good)
call h_en()|
h_en
Inner (good)
call h_ew()|
h_ew
Inner (good)
call h_ex()|
h_ex
Inner (good)
call h_se()|
h_se
Inner (good)
call h_ss()|
h_ss
Inner (good)
call h_sn()|
h_sn
Inner (good)
call h_sw()|
h_sw
Inner (good)
call h_sx()|
h_sx
Inner (good)
call h_ne()|
h_ne
Inner (good)
call h_ns()|
h_ns
Inner (good)
call h_nn()|
h_nn
Inner (good)
call h_we()|
h_we
Inner (good)
call h_ws()|
h_ws
Inner (good)
call h_ww()|
h_ww
Inner (good)
call h_xe()|
h_xe
Inner (good)
call h_xs()|
h_xs
Inner (good)
call h_xx()|
h_xx
Inner (good)
drop table t3|
drop procedure h_ee|
drop procedure h_es|
drop procedure h_en|
drop procedure h_ew|
drop procedure h_ex|
drop procedure h_se|
drop procedure h_ss|
drop procedure h_sn|
drop procedure h_sw|
drop procedure h_sx|
drop procedure h_ne|
drop procedure h_ns|
drop procedure h_nn|
drop procedure h_we|
drop procedure h_ws|
drop procedure h_ww|
drop procedure h_xe|
drop procedure h_xs|
drop procedure h_xx|
drop procedure if exists bug822|
create procedure bug822(a_id char(16), a_data int)
begin
declare n int;
select count(*) into n from t1 where id = a_id and data = a_data;
if n = 0 then
insert into t1 (id, data) values (a_id, a_data);
end if;
end|
delete from t1|
call bug822('foo', 42)|
call bug822('foo', 42)|
call bug822('bar', 666)|
select * from t1 order by data|
id	data
foo	42
bar	666
delete from t1|
drop procedure bug822|
drop procedure if exists bug1495|
create procedure bug1495()
begin
declare x int;
select data into x from t1 order by id limit 1;
if x > 10 then
insert into t1 values ("less", x-10);
else
insert into t1 values ("more", x+10);
end if;
end|
insert into t1 values ('foo', 12)|
call bug1495()|
delete from t1 where id='foo'|
insert into t1 values ('bar', 7)|
call bug1495()|
delete from t1 where id='bar'|
select * from t1 order by data|
id	data
less	2
more	17
delete from t1|
drop procedure bug1495|
drop procedure if exists bug1547|
create procedure bug1547(s char(16))
begin
declare x int;
select data into x from t1 where s = id limit 1;
if x > 10 then
insert into t1 values ("less", x-10);
else
insert into t1 values ("more", x+10);
end if;
end|
insert into t1 values ("foo", 12), ("bar", 7)|
call bug1547("foo")|
call bug1547("bar")|
select * from t1 order by id|
id	data
bar	7
foo	12
less	2
more	17
delete from t1|
drop procedure bug1547|
drop table if exists t70|
create table t70 (s1 int,s2 int)|
insert into t70 values (1,2)|
drop procedure if exists bug1656|
create procedure bug1656(out p1 int, out p2 int)
select * into p1, p1 from t70|
call bug1656(@1, @2)|
select @1, @2|
@1	@2
2	NULL
drop table t70|
drop procedure bug1656|
create table t3(a int)|
drop procedure if exists bug1862|
create procedure bug1862()
begin
insert into t3 values(2);    
flush tables;
end|
call bug1862()|
call bug1862()|
select * from t3|
a
2
2
drop table t3|
drop procedure bug1862|
drop procedure if exists bug1874|
create procedure bug1874()
begin
declare x int;
declare y double;
select max(data) into x from t1;
insert into t2 values ("max", x, 0);
select min(data) into x from t1;
insert into t2 values ("min", x, 0);
select sum(data) into x from t1;
insert into t2 values ("sum", x, 0);
select avg(data) into y from t1;
insert into t2 values ("avg", 0, y);
end|
insert into t1 (data) values (3), (1), (5), (9), (4)|
call bug1874()|
select * from t2 order by i|
s	i	d
avg	0	4.4
min	1	0
max	9	0
sum	22	0
delete from t1|
delete from t2|
drop procedure bug1874|
drop procedure if exists bug2260|
create procedure bug2260()
begin
declare v1 int;
declare c1 cursor for select data from t1;
declare continue handler for not found set @x2 = 1;
open c1;
fetch c1 into v1;
set @x2 = 2;
close c1;
end|
call bug2260()|
select @x2|
@x2
2
drop procedure bug2260|
drop procedure if exists bug2267_1|
create procedure bug2267_1()
begin
show procedure status where db='test';
end|
drop procedure if exists bug2267_2|
create procedure bug2267_2()
begin
show function status where db='test';
end|
drop procedure if exists bug2267_3|
create procedure bug2267_3()
begin
show create procedure bug2267_1;
end|
drop procedure if exists bug2267_4|
drop function if exists bug2267_4|
create procedure bug2267_4()
begin
show create function bug2267_4;
end|
create function bug2267_4() returns int return 100|
call bug2267_1()|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	bug2267_1	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
test	bug2267_2	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
test	bug2267_3	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
test	bug2267_4	PROCEDURE	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call bug2267_2()|
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	bug2267_4	FUNCTION	root@localhost	0000-00-00 00:00:00	0000-00-00 00:00:00	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call bug2267_3()|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug2267_1		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug2267_1`()
begin
show procedure status where db='test';
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call bug2267_4()|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug2267_4		CREATE DEFINER=`root`@`localhost` FUNCTION `bug2267_4`() RETURNS int(11)
return 100	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure bug2267_1|
drop procedure bug2267_2|
drop procedure bug2267_3|
drop procedure bug2267_4|
drop function bug2267_4|
drop procedure if exists bug2227|
create procedure bug2227(x int)
begin
declare y float default 2.6;
declare z char(16) default "zzz";
select 1.3, x, y, 42, z;
end|
call bug2227(9)|
1.3	x	y	42	z
1.3	9	2.6	42	zzz
drop procedure bug2227|
drop procedure if exists bug2614|
create procedure bug2614()
begin
drop table if exists t3;
create table t3 (id int default '0' not null);
insert into t3 select 12;
insert into t3 select * from t3;
end|
call bug2614()|
call bug2614()|
drop table t3|
drop procedure bug2614|
drop function if exists bug2674|
create function bug2674() returns int
return @@sort_buffer_size|
set @osbs = @@sort_buffer_size|
set @@sort_buffer_size = 262000|
select bug2674()|
bug2674()
262000
drop function bug2674|
set @@sort_buffer_size = @osbs|
drop procedure if exists bug3259_1 |
create procedure bug3259_1 () begin end|
drop procedure if exists BUG3259_2 |
create procedure BUG3259_2 () begin end|
drop procedure if exists Bug3259_3 |
create procedure Bug3259_3 () begin end|
call BUG3259_1()|
call BUG3259_1()|
call bug3259_2()|
call Bug3259_2()|
call bug3259_3()|
call bUG3259_3()|
drop procedure bUg3259_1|
drop procedure BuG3259_2|
drop procedure BUG3259_3|
drop function if exists bug2772|
create function bug2772() returns char(10) character set latin2
return 'a'|
select bug2772()|
bug2772()
a
drop function bug2772|
create table t3 (s1 smallint)|
insert into t3 values (123456789012)|
Warnings:
Warning	1264	Out of range value for column 's1' at row 1
drop procedure if exists bug2780|
create procedure bug2780()
begin
declare exit handler for sqlwarning set @x = 1; 
set @x = 0;
insert into t3 values (123456789012);
insert into t3 values (0);
end|
call bug2780()|
select @x|
@x
1
select * from t3|
s1
32767
32767
drop procedure bug2780|
drop table t3|
create table t3 (content varchar(10) )|
insert into t3 values ("test1")|
insert into t3 values ("test2")|
create table t4 (f1 int, rc int, t3 int)|
drop procedure if exists bug1863|
create procedure bug1863(in1 int)
begin 
declare ind int default 0;
declare t1 int;
declare t2 int;
declare t3 int;
declare rc int default 0;
declare continue handler for 1065 set rc = 1;
drop temporary table if exists temp_t1;
create temporary table temp_t1 (
f1 int auto_increment, f2 varchar(20), primary key (f1)
);
insert into temp_t1 (f2) select content from t3;
select f2 into t3 from temp_t1 where f1 = 10;
if (rc) then
insert into t4 values (1, rc, t3);
end if;
insert into t4 values (2, rc, t3);
end|
call bug1863(10)|
call bug1863(10)|
select * from t4|
f1	rc	t3
2	0	NULL
2	0	NULL
drop procedure bug1863|
drop temporary table temp_t1;
drop table t3, t4|
create table t3 ( 
OrderID  int not null,
MarketID int,
primary key (OrderID)
)|
create table t4 ( 
MarketID int not null,
Market varchar(60),
Status char(1),
primary key (MarketID)
)|
insert t3 (OrderID,MarketID) values (1,1)|
insert t3 (OrderID,MarketID) values (2,2)|
insert t4 (MarketID,Market,Status) values (1,"MarketID One","A")|
insert t4 (MarketID,Market,Status) values (2,"MarketID Two","A")|
drop procedure if exists bug2656_1|
create procedure bug2656_1()
begin 
select
m.Market
from  t4 m JOIN t3 o 
ON o.MarketID != 1 and o.MarketID = m.MarketID;
end |
drop procedure if exists bug2656_2|
create procedure bug2656_2()
begin 
select
m.Market
from  
t4 m, t3 o
where       
m.MarketID != 1 and m.MarketID = o.MarketID;
end |
call bug2656_1()|
Market
MarketID Two
call bug2656_1()|
Market
MarketID Two
call bug2656_2()|
Market
MarketID Two
call bug2656_2()|
Market
MarketID Two
drop procedure bug2656_1|
drop procedure bug2656_2|
drop table t3, t4|
drop procedure if exists bug3426|
create procedure bug3426(in_time int unsigned, out x int)
begin
if in_time is null then
set @stamped_time=10;
set x=1;
else
set @stamped_time=in_time;
set x=2;
end if;
end|
set time_zone='+03:00';
call bug3426(1000, @i)|
select @i, from_unixtime(@stamped_time, '%d-%m-%Y %h:%i:%s') as time|
@i	time
2	01-01-1970 03:16:40
call bug3426(NULL, @i)|
select @i, from_unixtime(@stamped_time, '%d-%m-%Y %h:%i:%s') as time|
@i	time
1	01-01-1970 03:00:10
alter procedure bug3426 sql security invoker|
call bug3426(NULL, @i)|
select @i, from_unixtime(@stamped_time, '%d-%m-%Y %h:%i:%s') as time|
@i	time
1	01-01-1970 03:00:10
call bug3426(1000, @i)|
select @i, from_unixtime(@stamped_time, '%d-%m-%Y %h:%i:%s') as time|
@i	time
2	01-01-1970 03:16:40
drop procedure bug3426|
create table t3 (
id int unsigned auto_increment not null primary key,
title VARCHAR(200),
body text,
fulltext (title,body)
)|
insert into t3 (title,body) values
('MySQL Tutorial','DBMS stands for DataBase ...'),
('How To Use MySQL Well','After you went through a ...'),
('Optimizing MySQL','In this tutorial we will show ...'),
('1001 MySQL Tricks','1. Never run mysqld as root. 2. ...'),
('MySQL vs. YourSQL','In the following database comparison ...'),
('MySQL Security','When configured properly, MySQL ...')|
drop procedure if exists bug3734 |
create procedure bug3734 (param1 varchar(100))
select * from t3 where match (title,body) against (param1)|
call bug3734('database')|
id	title	body
1	MySQL Tutorial	DBMS stands for DataBase ...
5	MySQL vs. YourSQL	In the following database comparison ...
call bug3734('Security')|
id	title	body
6	MySQL Security	When configured properly, MySQL ...
drop procedure bug3734|
drop table t3|
drop procedure if exists bug3863|
create procedure bug3863()
begin
set @a = 0;
while @a < 5 do
set @a = @a + 1;
end while;
end|
call bug3863()|
select @a|
@a
5
call bug3863()|
select @a|
@a
5
drop procedure bug3863|
create table t3 (
id int(10) unsigned not null default 0,
rid int(10) unsigned not null default 0,
msg text not null,
primary key (id),
unique key rid (rid, id)
)|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
drop procedure if exists bug2460_1|
create procedure bug2460_1(in v int)
begin
( select n0.id from t3 as n0 where n0.id = v )
union
( select n0.id from t3 as n0, t3 as n1
where n0.id = n1.rid and n1.id = v )
union
( select n0.id from t3 as n0, t3 as n1, t3 as n2
where n0.id = n1.rid and n1.id = n2.rid and n2.id = v );
end|
call bug2460_1(2)|
id
call bug2460_1(2)|
id
insert into t3 values (1, 1, 'foo'), (2, 1, 'bar'), (3, 1, 'zip zap')|
call bug2460_1(2)|
id
2
1
call bug2460_1(2)|
id
2
1
drop procedure if exists bug2460_2|
create procedure bug2460_2()
begin
drop table if exists t3;
create temporary table t3 (s1 int);
insert into t3 select 1 union select 1;
end|
call bug2460_2()|
call bug2460_2()|
select * from t3|
s1
1
drop procedure bug2460_1|
drop procedure bug2460_2|
drop table t3|
set @@sql_mode = ''|
drop procedure if exists bug2564_1|
create procedure bug2564_1()
comment 'Joe''s procedure'
  insert into `t1` values ("foo", 1)|
set @@sql_mode = 'ANSI_QUOTES'|
drop procedure if exists bug2564_2|
create procedure bug2564_2()
insert into "t1" values ('foo', 1)|
set @@sql_mode = ''$
drop function if exists bug2564_3$
create function bug2564_3(x int, y int) returns int
return x || y$
Warnings:
Warning	1287	'|| as a synonym for OR' is deprecated and will be removed in a future release. Please use OR instead
set @@sql_mode = 'ANSI'$
drop function if exists bug2564_4$
create function bug2564_4(x int, y int) returns int
return x || y$
set @@sql_mode = ''|
show create procedure bug2564_1|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug2564_1		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug2564_1`()
    COMMENT 'Joe''s procedure'
insert into `t1` values ("foo", 1)	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show create procedure bug2564_2|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug2564_2	ANSI_QUOTES	CREATE DEFINER="root"@"localhost" PROCEDURE "bug2564_2"()
insert into "t1" values ('foo', 1)	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show create function bug2564_3|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug2564_3		CREATE DEFINER=`root`@`localhost` FUNCTION `bug2564_3`(x int, y int) RETURNS int(11)
return x || y	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show create function bug2564_4|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug2564_4	REAL_AS_FLOAT,PIPES_AS_CONCAT,ANSI_QUOTES,IGNORE_SPACE,ONLY_FULL_GROUP_BY,ANSI	CREATE DEFINER="root"@"localhost" FUNCTION "bug2564_4"(x int, y int) RETURNS int(11)
return x || y	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure bug2564_1|
drop procedure bug2564_2|
drop function bug2564_3|
drop function bug2564_4|
drop function if exists bug3132|
create function bug3132(s char(20)) returns char(50)
return concat('Hello, ', s, '!')|
select bug3132('Bob') union all select bug3132('Judy')|
bug3132('Bob')
Hello, Bob!
Hello, Judy!
drop function bug3132|
drop procedure if exists bug3843|
create procedure bug3843()
analyze table t1|
call bug3843()|
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
call bug3843()|
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Table is already up to date
select 1+2|
1+2
3
drop procedure bug3843|
create table t3 ( s1 char(10) )|
insert into t3 values ('a'), ('b')|
drop procedure if exists bug3368|
create procedure bug3368(v char(10))
begin
select group_concat(v) from t3;
end|
call bug3368('x')|
group_concat(v)
x,x
call bug3368('yz')|
group_concat(v)
yz,yz
drop procedure bug3368|
drop table t3|
create table t3 (f1 int, f2 int)|
insert into t3 values (1,1)|
drop procedure if exists bug4579_1|
create procedure bug4579_1 ()
begin
declare sf1 int;
select f1 into sf1 from t3 where f1=1 and f2=1;
update t3 set f2 = f2 + 1 where f1=1 and f2=1;
call bug4579_2();
end|
drop procedure if exists bug4579_2|
create procedure bug4579_2 ()
begin
end|
call bug4579_1()|
call bug4579_1()|
call bug4579_1()|
drop procedure bug4579_1|
drop procedure bug4579_2|
drop table t3|
drop procedure if exists bug2773|
create function bug2773() returns int return null|
create table t3 as select bug2773()|
show create table t3|
Table	Create Table
t3	CREATE TABLE `t3` (
  `bug2773()` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
drop table t3|
drop function bug2773|
drop procedure if exists bug3788|
create function bug3788() returns date return cast("2005-03-04" as date)|
select bug3788()|
bug3788()
2005-03-04
drop function bug3788|
create function bug3788() returns binary(1) return 5|
select bug3788()|
bug3788()
5
drop function bug3788|
create table t3 (f1 int, f2 int, f3 int)|
insert into t3 values (1,1,1)|
drop procedure if exists bug4726|
create procedure bug4726()
begin
declare tmp_o_id INT;
declare tmp_d_id INT default 1;
while tmp_d_id <= 2 do
begin
select f1 into tmp_o_id from t3 where f2=1 and f3=1;
set tmp_d_id = tmp_d_id + 1;
end;
end while;
end|
call bug4726()|
call bug4726()|
call bug4726()|
drop procedure bug4726|
drop table t3|
drop procedure if exists bug4902|
set SQL_BIG_SELECTS=1|
create procedure bug4902()
begin
show charset like 'foo';
show collation like 'foo';
show create table t1;
show create database test;
show databases like 'foo';
show errors;
show columns from t1;
show keys from t1;
show open tables like 'foo';
#show privileges need to be commented as its output differs on different platform
#show privileges;
show status like 'foo';
show tables like 'foo';
show variables like 'foo';
show warnings;
end|
call bug4902()|
Charset	Description	Default collation	Maxlen
Collation	Charset	Id	Default	Compiled	Sortlen	Pad_attribute
Table	Create Table
t1	CREATE TABLE `t1` (
  `id` char(16) NOT NULL DEFAULT '',
  `data` int(11) NOT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
Database	Create Database
test	CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci */ /*!80016 DEFAULT ENCRYPTION='N' */
Database (foo)
Level	Code	Message
Field	Type	Null	Key	Default	Extra
id	char(16)	NO			
data	int(11)	NO		NULL	
Table	Non_unique	Key_name	Seq_in_index	Column_name	Collation	Cardinality	Sub_part	Packed	Null	Index_type	Comment	Index_comment	Visible	Expression
Database	Table	In_use	Name_locked
Variable_name	Value
Tables_in_test (foo)
Variable_name	Value
Level	Code	Message
call bug4902()|
Charset	Description	Default collation	Maxlen
Collation	Charset	Id	Default	Compiled	Sortlen	Pad_attribute
Table	Create Table
t1	CREATE TABLE `t1` (
  `id` char(16) NOT NULL DEFAULT '',
  `data` int(11) NOT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
Database	Create Database
test	CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci */ /*!80016 DEFAULT ENCRYPTION='N' */
Database (foo)
Level	Code	Message
Field	Type	Null	Key	Default	Extra
id	char(16)	NO			
data	int(11)	NO		NULL	
Table	Non_unique	Key_name	Seq_in_index	Column_name	Collation	Cardinality	Sub_part	Packed	Null	Index_type	Comment	Index_comment	Visible	Expression
Database	Table	In_use	Name_locked
Variable_name	Value
Tables_in_test (foo)
Variable_name	Value
Level	Code	Message
drop procedure bug4902|
drop procedure if exists bug4904|
create procedure bug4904()
begin
declare continue handler for sqlstate 'HY000' begin end;
create table t2 as select * from t3;
end|
call bug4904()|
ERROR 42S02: Table 'test.t3' doesn't exist
drop procedure bug4904|
create table t3 (s1 char character set latin1, s2 char character set latin2)|
drop procedure if exists bug4904|
create procedure bug4904 ()
begin
declare continue handler for sqlstate 'HY000' begin end;
select s1 from t3 union select s2 from t3; 
end|
call bug4904()|
drop procedure bug4904|
drop table t3|
drop procedure if exists bug336|
create procedure bug336(out y int)
begin
declare x int;
set x = (select sum(t.data) from test.t1 t);
set y = x;
end|
insert into t1 values ("a", 2), ("b", 3)|
call bug336(@y)|
select @y|
@y
5
delete from t1|
drop procedure bug336|
drop procedure if exists bug3157|
create procedure bug3157()
begin
if exists(select * from t1) then
set @n= @n + 1;
end if;
if (select count(*) from t1) then
set @n= @n + 1;
end if;
end|
set @n = 0|
insert into t1 values ("a", 1)|
call bug3157()|
select @n|
@n
2
delete from t1|
drop procedure bug3157|
drop procedure if exists bug5251|
create procedure bug5251()
begin
end|
select created into @c1 from information_schema.routines
where routine_schema='test' and routine_name='bug5251'|
alter procedure bug5251 comment 'foobar'|
select count(*) from information_schema.routines
where routine_schema='test' and routine_name='bug5251' and created = @c1|
count(*)
1
drop procedure bug5251|
drop procedure if exists bug5251|
create procedure bug5251()
checksum table t1|
call bug5251()|
Table	Checksum
test.t1	0
call bug5251()|
Table	Checksum
test.t1	0
drop procedure bug5251|
drop procedure if exists bug5287|
create procedure bug5287(param1 int)
label1:
begin
declare c cursor for select 5;
loop
if param1 >= 0 then
leave label1;
end if;
end loop;
end|
call bug5287(1)|
drop procedure bug5287|
drop procedure if exists bug5307|
create procedure bug5307()
begin
end; set @x = 3|
call bug5307()|
select @x|
@x
3
drop procedure bug5307|
drop procedure if exists bug5258|
create procedure bug5258()
begin
end|
drop procedure if exists bug5258_aux|
create procedure bug5258_aux()
begin
declare c, m char(19);
select created,last_altered into c,m from information_schema.routines where routine_name = 'bug5258';
if c = m then
select 'Ok';
else
select c, m;
end if;
end|
call bug5258_aux()|
Ok
Ok
drop procedure bug5258|
drop procedure bug5258_aux|
drop function if exists bug4487|
create function bug4487() returns char
begin
declare v char;
return v;
end|
select bug4487()|
bug4487()
NULL
drop function bug4487|
drop procedure if exists bug4941|
drop procedure if exists bug4941|
create procedure bug4941(out x int)
begin
declare c cursor for select i from t2 limit 1;
open c;
fetch c into x;
close c;
end|
insert into t2 values (null, null, null)|
set @x = 42|
call bug4941(@x)|
select @x|
@x
NULL
delete from t1|
drop procedure bug4941|
drop procedure if exists bug4905|
create table t3 (s1 int,primary key (s1))|
drop procedure if exists bug4905|
create procedure bug4905()
begin
declare v int;
declare continue handler for sqlstate '23000' set v = 5;
insert into t3 values (1);
end|
call bug4905()|
select row_count()|
row_count()
1
call bug4905()|
select row_count()|
row_count()
0
call bug4905()|
select row_count()|
row_count()
0
select * from t3|
s1
1
drop procedure bug4905|
drop table t3|
drop procedure if exists bug6029|
drop procedure if exists bug6029|
create procedure bug6029()
begin
declare exit handler for 1136  select '1136';
declare exit handler for sqlstate '23000'  select 'sqlstate 23000';
declare continue handler for sqlexception  select 'sqlexception';
insert into t3 values (1);
insert into t3 values (1,2);
end|
create table t3 (s1 int, primary key (s1))|
insert into t3 values (1)|
call bug6029()|
sqlstate 23000
sqlstate 23000
delete from t3|
call bug6029()|
1136
1136
drop procedure bug6029|
drop table t3|
drop procedure if exists bug8540|
create procedure bug8540()
begin
declare x int default 1;
select x as y, x+0 as z;
end|
call bug8540()|
y	z
1	1
drop procedure bug8540|
create table t3 (s1 int)|
drop procedure if exists bug6642|
create procedure bug6642()
select abs(count(s1)) from t3|
call bug6642()|
abs(count(s1))
0
call bug6642()|
abs(count(s1))
0
drop procedure bug6642|
insert into t3 values (0),(1)|
drop procedure if exists bug7013|
create procedure bug7013()
select s1,count(s1) from t3 group by s1 with rollup|
call bug7013()|
s1	count(s1)
0	1
1	1
NULL	2
call bug7013()|
s1	count(s1)
0	1
1	1
NULL	2
drop procedure bug7013|
drop table if exists t4|
create table t4 (
a mediumint(8) unsigned not null auto_increment,
b smallint(5) unsigned not null,
c char(32) not null,
primary key  (a)
) engine=myisam default charset=latin1|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
insert into t4 values (1, 2, 'oneword')|
insert into t4 values (2, 2, 'anotherword')|
drop procedure if exists bug7743|
create procedure bug7743 ( searchstring char(28) )
begin
declare var mediumint(8) unsigned;
select a into var from t4 where b = 2 and c = binary searchstring limit 1;
show warnings;
select var;
end|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
call bug7743("oneword")|
Level	Code	Message
var
1
call bug7743("OneWord")|
Level	Code	Message
Warning	1329	No data - zero rows fetched, selected, or processed
var
NULL
call bug7743("anotherword")|
Level	Code	Message
var
2
call bug7743("AnotherWord")|
Level	Code	Message
Warning	1329	No data - zero rows fetched, selected, or processed
var
NULL
drop procedure bug7743|
drop table t4|
delete from t3|
insert into t3 values(1)|
drop procedure if exists bug7992_1|
Warnings:
Note	1305	PROCEDURE test.bug7992_1 does not exist
drop procedure if exists bug7992_2|
Warnings:
Note	1305	PROCEDURE test.bug7992_2 does not exist
create procedure bug7992_1()
begin
declare i int;
select max(s1)+1 into i from t3;
end|
create procedure bug7992_2()
insert into t3 (s1) select max(t4.s1)+1 from t3 as t4|
call bug7992_1()|
call bug7992_1()|
call bug7992_2()|
call bug7992_2()|
drop procedure bug7992_1|
drop procedure bug7992_2|
drop table t3|
create table t3 (  userid bigint(20) not null default 0 )|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
drop procedure if exists bug8116|
create procedure bug8116(in _userid int)
select * from t3 where userid = _userid|
call bug8116(42)|
userid
call bug8116(42)|
userid
drop procedure bug8116|
drop table t3|
drop procedure if exists bug6857|
create procedure bug6857()
begin
declare t0, t1 int;
declare plus bool default 0;
set t0 = unix_timestamp();
select sleep(1.1);
set t1 = unix_timestamp();
if t1 > t0 then
set plus = 1;
end if;
select plus;
end|
call bug6857()|
sleep(1.1)
0
plus
1
drop procedure bug6857|
drop procedure if exists bug8757|
create procedure bug8757()
begin
declare x int;
declare c1 cursor for select data from t1 limit 1;
begin
declare y int;
declare c2 cursor for select i from t2 limit 1;
open c2;
fetch c2 into y;
close c2;
select 2,y;
end;
open c1;
fetch c1 into x;
close c1;
select 1,x;
end|
delete from t1|
delete from t2|
insert into t1 values ("x", 1)|
insert into t2 values ("y", 2, 0.0)|
call bug8757()|
2	y
2	2
1	x
1	1
delete from t1|
delete from t2|
drop procedure bug8757|
drop procedure if exists bug8762|
drop procedure if exists bug8762; create procedure bug8762() begin end|
drop procedure if exists bug8762; create procedure bug8762() begin end|
drop procedure bug8762|
drop function if exists bug5240|
create function bug5240 () returns int
begin
declare x int;
declare c cursor for select data from t1 limit 1;
open c;
fetch c into x;
close c;
return x;
end|
delete from t1|
insert into t1 values ("answer", 42)|
select id, bug5240() from t1|
id	bug5240()
answer	42
drop function bug5240|
drop procedure if exists p1|
create table t3(id int)|
insert into t3 values(1)|
create procedure bug7992()
begin
declare i int;
select max(id)+1 into i from t3;
end|
call bug7992()|
call bug7992()|
drop procedure bug7992|
drop table t3|
create table t3 (
lpitnumber int(11) default null,
lrecordtype int(11) default null
)|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
create table t4 (
lbsiid int(11) not null default '0',
ltradingmodeid int(11) not null default '0',
ltradingareaid int(11) not null default '0',
csellingprice decimal(19,4) default null,
primary key  (lbsiid,ltradingmodeid,ltradingareaid)
)|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
create table t5 (
lbsiid int(11) not null default '0',
ltradingareaid int(11) not null default '0',
primary key  (lbsiid,ltradingareaid)
)|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
drop procedure if exists bug8849|
create procedure bug8849()
begin
insert into t5
(
t5.lbsiid,
t5.ltradingareaid
)
select distinct t3.lpitnumber, t4.ltradingareaid
from
t4 join t3 on
t3.lpitnumber = t4.lbsiid
and t3.lrecordtype = 1
left join t4 as price01 on
price01.lbsiid = t4.lbsiid and
price01.ltradingmodeid = 1 and
t4.ltradingareaid = price01.ltradingareaid;
end|
call bug8849()|
call bug8849()|
call bug8849()|
drop procedure bug8849|
drop tables t3,t4,t5|
drop procedure if exists bug8937|
create procedure bug8937()
begin
declare s,x,y,z int;
declare a float;
select sum(data),avg(data),min(data),max(data) into s,x,y,z from t1;
select s,x,y,z;
select avg(data) into a from t1;
select a;
end|
delete from t1|
insert into t1 (data) values (1), (2), (3), (4), (6)|
call bug8937()|
s	x	y	z
16	3	1	6
a
3.2
drop procedure bug8937|
delete from t1|
drop procedure if exists bug6900|
drop procedure if exists bug9074|
drop procedure if exists bug6900_9074|
create table t3 (w char unique, x char)|
insert into t3 values ('a', 'b')|
create procedure bug6900()
begin
declare exit handler for sqlexception select '1';
begin
declare exit handler for sqlexception select '2';
insert into t3 values ('x', 'y', 'z');
end;
end|
create procedure bug9074()
begin
declare x1, x2, x3, x4, x5, x6 int default 0;
begin    
declare continue handler for sqlstate '23000' set x5 = 1;      
insert into t3 values ('a', 'b');      
set x6 = 1;      
end;
begin1_label:
begin
declare continue handler for sqlstate '23000' set x1 = 1;      
insert into t3 values ('a', 'b');      
set x2 = 1;      
begin2_label:
begin  
declare exit handler for sqlstate '23000' set x3 = 1;         
set x4= 1;         
insert into t3 values ('a','b');
set x4= 0;
end begin2_label;
end begin1_label;
select x1, x2, x3, x4, x5, x6;
end|
create procedure bug6900_9074(z int)
begin
declare exit handler for sqlstate '23000' select '23000';
begin
declare exit handler for sqlexception select 'sqlexception';
if z = 1 then
insert into t3 values ('a', 'b');
else
insert into t3 values ('x', 'y', 'z');
end if;
end;
end|
call bug6900()|
2
2
call bug9074()|
x1	x2	x3	x4	x5	x6
1	1	1	1	1	1
call bug6900_9074(0)|
sqlexception
sqlexception
call bug6900_9074(1)|
sqlexception
sqlexception
drop procedure bug6900|
drop procedure bug9074|
drop procedure bug6900_9074|
drop table t3|
drop procedure if exists avg|
create procedure avg ()
begin
end|
call avg ()|
drop procedure avg|
drop procedure if exists bug6129|
set @old_mode= @@sql_mode;
set @@sql_mode= "ERROR_FOR_DIVISION_BY_ZERO";
create procedure bug6129()
select @@sql_mode|
call bug6129()|
@@sql_mode
ERROR_FOR_DIVISION_BY_ZERO
set @@sql_mode= "STRICT_ALL_TABLES,NO_ZERO_DATE"|
Warnings:
Warning	3135	'NO_ZERO_DATE', 'NO_ZERO_IN_DATE' and 'ERROR_FOR_DIVISION_BY_ZERO' sql modes should be used with strict mode. They will be merged with strict mode in a future release.
call bug6129()|
@@sql_mode
ERROR_FOR_DIVISION_BY_ZERO
set @@sql_mode= "NO_ZERO_IN_DATE"|
Warnings:
Warning	3135	'NO_ZERO_DATE', 'NO_ZERO_IN_DATE' and 'ERROR_FOR_DIVISION_BY_ZERO' sql modes should be used with strict mode. They will be merged with strict mode in a future release.
call bug6129()|
@@sql_mode
ERROR_FOR_DIVISION_BY_ZERO
set @@sql_mode=@old_mode;
drop procedure bug6129|
drop procedure if exists bug9856|
create procedure bug9856()
begin
declare v int;
declare c cursor for select data from t1;
declare exit handler for sqlexception, not found select '16';
open c;
fetch c into v;
select v;
end|
delete from t1|
call bug9856()|
16
16
call bug9856()|
16
16
drop procedure bug9856|
drop procedure if exists bug9674_1|
drop procedure if exists bug9674_2|
create procedure bug9674_1(out arg int)
begin
declare temp_in1 int default 0;
declare temp_fl1 int default 0;
set temp_in1 = 100;
set temp_fl1 = temp_in1/10;
set arg = temp_fl1;
end|
create procedure bug9674_2()
begin
declare v int default 100;
select v/10;
end|
call bug9674_1(@sptmp)|
call bug9674_1(@sptmp)|
select @sptmp|
@sptmp
10
call bug9674_2()|
v/10
10.0000
call bug9674_2()|
v/10
10.0000
drop procedure bug9674_1|
drop procedure bug9674_2|
drop procedure if exists bug9598_1|
drop procedure if exists bug9598_2|
create procedure bug9598_1(in var_1 char(16),
out var_2 integer, out var_3 integer)
begin
set var_2 = 50;
set var_3 = 60;
end|
create procedure bug9598_2(in v1 char(16),
in v2 integer,
in v3 integer,
in v4 integer,
in v5 integer)
begin
select v1,v2,v3,v4,v5;
call bug9598_1(v1,@tmp1,@tmp2);
select v1,v2,v3,v4,v5;
end|
call bug9598_2('Test',2,3,4,5)|
v1	v2	v3	v4	v5
Test	2	3	4	5
v1	v2	v3	v4	v5
Test	2	3	4	5
select @tmp1, @tmp2|
@tmp1	@tmp2
50	60
drop procedure bug9598_1|
drop procedure bug9598_2|
drop function if exists bug9102|
create function bug9102() returns blob return 'a'|
select bug9102()|
bug9102()
a
drop function bug9102|
drop function if exists bug7648|
create function bug7648() returns bit(8) return 'a'|
select bug7648()|
bug7648()
a
drop function bug7648|
drop function if exists bug9775|
create function bug9775(v1 char(1)) returns enum('a','b') return v1|
select bug9775('a'),bug9775('b'),bug9775('c')|
bug9775('a')	bug9775('b')	bug9775('c')
a	b	
Warnings:
Warning	1265	Data truncated for column 'bug9775('c')' at row 1
drop function bug9775|
create function bug9775(v1 int) returns enum('a','b') return v1|
select bug9775(1),bug9775(2),bug9775(3)|
bug9775(1)	bug9775(2)	bug9775(3)
a	b	
Warnings:
Warning	1265	Data truncated for column 'bug9775(3)' at row 1
drop function bug9775|
create function bug9775(v1 char(1)) returns set('a','b') return v1|
select bug9775('a'),bug9775('b'),bug9775('a,b'),bug9775('c')|
bug9775('a')	bug9775('b')	bug9775('a,b')	bug9775('c')
a	b	a	
Warnings:
Warning	1265	Data truncated for column 'v1' at row 1
Warning	1265	Data truncated for column 'bug9775('c')' at row 1
drop function bug9775|
create function bug9775(v1 int) returns set('a','b') return v1|
select bug9775(1),bug9775(2),bug9775(3),bug9775(4)|
bug9775(1)	bug9775(2)	bug9775(3)	bug9775(4)
a	b	a,b	
Warnings:
Warning	1265	Data truncated for column 'bug9775(4)' at row 1
drop function bug9775|
drop function if exists bug8861|
create function bug8861(v1 int) returns year return v1|
select bug8861(05)|
bug8861(05)
2005
set @x = bug8861(05)|
select @x|
@x
2005
drop function bug8861|
drop procedure if exists bug9004_1|
drop procedure if exists bug9004_2|
create procedure bug9004_1(x char(16))
begin
insert into t1 values (x, 42);
insert into t1 values (x, 17);
end|
create procedure bug9004_2(x char(16))
call bug9004_1(x)|
call bug9004_1('12345678901234567')|
Warnings:
Warning	1265	Data truncated for column 'x' at row 1
call bug9004_2('12345678901234567890')|
Warnings:
Warning	1265	Data truncated for column 'x' at row 1
delete from t1|
drop procedure bug9004_1|
drop procedure bug9004_2|
drop procedure if exists bug7293|
insert into t1 values ('secret', 0)|
create procedure bug7293(p1 varchar(100))
begin
if exists (select id from t1 where soundex(p1)=soundex(id)) then
select 'yes';
end if;
end;|
call bug7293('secret')|
yes
yes
call bug7293 ('secrete')|
yes
yes
drop procedure bug7293|
delete from t1|
drop procedure if exists bug9841|
drop view if exists v1|
create view v1 as select * from t1, t2 where id = s|
create procedure bug9841 ()
update v1 set data = 10|
call bug9841()|
drop view v1|
drop procedure bug9841|
drop procedure if exists bug5963|
create procedure bug5963_1 () begin declare v int; set v = (select s1 from t3); select v; end;|
create table t3 (s1 int)|
insert into t3 values (5)|
call bug5963_1()|
v
5
call bug5963_1()|
v
5
drop procedure bug5963_1|
drop table t3|
create procedure bug5963_2 (cfk_value int) 
begin 
if cfk_value in (select cpk from t3) then 
set @x = 5; 
end if; 
end; 
|
create table t3 (cpk int)|
insert into t3 values (1)|
call bug5963_2(1)|
call bug5963_2(1)|
drop procedure bug5963_2|
drop table t3|
drop function if exists bug9559|
create function bug9559()
returns int
begin
set @y = -6/2;
return @y;
end|
select bug9559()|
bug9559()
-3
drop function bug9559|
drop procedure if exists bug10961|
create procedure bug10961()
begin
declare v char;
declare x int;
declare c cursor for select * from dual;
declare continue handler for sqlexception select x;
set x = 1;
open c;
set x = 2;
fetch c into v;
set x = 3;
close c;
end|
call bug10961()|
x
1
x
2
x
3
call bug10961()|
x
1
x
2
x
3
drop procedure bug10961|
DROP PROCEDURE IF EXISTS bug6866|
DROP VIEW IF EXISTS tv|
Warnings:
Note	1051	Unknown table 'test.tv'
DROP TABLE IF EXISTS tt1,tt2,tt3|
Warnings:
Note	1051	Unknown table 'test.tt1'
Note	1051	Unknown table 'test.tt2'
Note	1051	Unknown table 'test.tt3'
CREATE TABLE tt1 (a1 int, a2 int, a3 int, data varchar(10))|
CREATE TABLE tt2 (a2 int, data2 varchar(10))|
CREATE TABLE tt3 (a3 int, data3 varchar(10))|
INSERT INTO tt1 VALUES (1, 1, 4, 'xx')|
INSERT INTO tt2 VALUES (1, 'a')|
INSERT INTO tt2 VALUES (2, 'b')|
INSERT INTO tt2 VALUES (3, 'c')|
INSERT INTO tt3 VALUES (4, 'd')|
INSERT INTO tt3 VALUES (5, 'e')|
INSERT INTO tt3 VALUES (6, 'f')|
CREATE VIEW tv AS
SELECT tt1.*, tt2.data2, tt3.data3
FROM tt1 INNER JOIN tt2 ON tt1.a2 = tt2.a2
LEFT JOIN tt3 ON tt1.a3 = tt3.a3
ORDER BY tt1.a1, tt2.a2, tt3.a3|
CREATE PROCEDURE bug6866 (_a1 int)
BEGIN
SELECT * FROM tv WHERE a1 = _a1;
END|
CALL bug6866(1)|
a1	a2	a3	data	data2	data3
1	1	4	xx	a	d
CALL bug6866(1)|
a1	a2	a3	data	data2	data3
1	1	4	xx	a	d
CALL bug6866(1)|
a1	a2	a3	data	data2	data3
1	1	4	xx	a	d
DROP PROCEDURE bug6866;
DROP VIEW tv|
DROP TABLE tt1, tt2, tt3|
DROP PROCEDURE IF EXISTS bug10136|
create table t3 ( name char(5) not null primary key, val float not null)|
insert into t3 values ('aaaaa', 1), ('bbbbb', 2), ('ccccc', 3)|
create procedure bug10136()
begin
declare done int default 3;
repeat
select * from t3;
set done = done - 1;
until done <= 0 end repeat;
end|
call bug10136()|
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
call bug10136()|
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
call bug10136()|
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
name	val
aaaaa	1
bbbbb	2
ccccc	3
drop procedure bug10136|
drop table t3|
drop procedure if exists bug11529|
create procedure bug11529()
begin
declare c cursor for select id, data from t1 where data in (10,13);
open c;
begin
declare vid char(16);
declare vdata int;
declare exit handler for not found begin end;
while true do
fetch c into vid, vdata;
end while;
end;
close c;
end|
insert into t1 values
('Name1', 10),
('Name2', 11),
('Name3', 12),
('Name4', 13),
('Name5', 14)|
call bug11529()|
call bug11529()|
delete from t1|
drop procedure bug11529|
set character set utf8|
drop procedure if exists bug6063|
drop procedure if exists bug7088_1|
drop procedure if exists bug7088_2|
create procedure bug6063()
begin
lГўbel: begin end;
label: begin end;
label1: begin end;
end|
create procedure bug7088_1()
label1: begin end label1|
create procedure bug7088_2()
läbel1: begin end|
call bug6063()|
call bug7088_1()|
call bug7088_2()|
set character set default|
show create procedure bug6063|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug6063		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug6063`()
begin
lГўbel: begin end;
label: begin end;
label1: begin end;
end	utf8	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show create procedure bug7088_1|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug7088_1		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug7088_1`()
label1: begin end label1	utf8	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
show create procedure bug7088_2|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug7088_2		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug7088_2`()
läbel1: begin end	utf8	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure bug6063|
drop procedure bug7088_1|
drop procedure bug7088_2|
drop procedure if exists bug9565_sub|
drop procedure if exists bug9565|
create procedure bug9565_sub()
begin
select * from t1;
end|
create procedure bug9565()
begin
insert into t1 values ("one", 1);
call bug9565_sub();
end|
call bug9565()|
id	data
one	1
delete from t1|
drop procedure bug9565_sub|
drop procedure bug9565|
drop procedure if exists bug9538|
create procedure bug9538()
set @@sort_buffer_size = 1000000|
set @x = @@sort_buffer_size|
set @@sort_buffer_size = 2000000|
select @@sort_buffer_size|
@@sort_buffer_size
2000000
call bug9538()|
select @@sort_buffer_size|
@@sort_buffer_size
1000000
set @@sort_buffer_size = @x|
drop procedure bug9538|
drop procedure if exists bug8692|
create table t3 (c1 varchar(5), c2 char(5), c3 enum('one','two'), c4 text, c5 blob, c6 char(5), c7 varchar(5))|
insert into t3 values ('', '', '', '', '', '', NULL)|
Warnings:
Warning	1265	Data truncated for column 'c3' at row 1
create procedure bug8692()
begin 
declare v1 VARCHAR(10); 
declare v2 VARCHAR(10); 
declare v3 VARCHAR(10); 
declare v4 VARCHAR(10); 
declare v5 VARCHAR(10); 
declare v6 VARCHAR(10); 
declare v7 VARCHAR(10); 
declare c8692 cursor for select c1,c2,c3,c4,c5,c6,c7 from t3; 
open c8692; 
fetch c8692 into v1,v2,v3,v4,v5,v6,v7;
select v1, v2, v3, v4, v5, v6, v7;
end|
call bug8692()|
v1	v2	v3	v4	v5	v6	v7
						NULL
drop procedure bug8692|
drop table t3|
drop function if exists bug10055|
create function bug10055(v char(255)) returns char(255) return lower(v)|
select t.column_name, bug10055(t.column_name)
from information_schema.columns as t
where t.table_schema = 'test' and t.table_name = 't1'
order by t.column_name|
COLUMN_NAME	bug10055(t.column_name)
data	data
id	id
drop function bug10055|
drop procedure if exists bug12297|
create procedure bug12297(lim int)
begin
set @x = 0;
repeat
insert into t1(id,data)
values('aa', @x);
set @x = @x + 1;
until @x >= lim
end repeat;
end|
call bug12297(10)|
drop procedure bug12297|
drop function if exists f_bug11247|
drop procedure if exists p_bug11247|
create function f_bug11247(param int)
returns int
return param + 1|
create procedure p_bug11247(lim int)
begin
declare v int default 0;
while v < lim do
set v= f_bug11247(v);
end while;
end|
call p_bug11247(10)|
drop function f_bug11247|
drop procedure p_bug11247|
drop procedure if exists bug12168|
drop table if exists t3, t4|
create table t3 (a int)|
insert into t3 values (1),(2),(3),(4)|
create table t4 (a int)|
create procedure bug12168(arg1 char(1))
begin
declare b, c integer;
if arg1 = 'a' then
begin
declare c1 cursor for select a from t3 where a % 2;
declare continue handler for not found set b = 1;
set b = 0;
open c1;
c1_repeat: repeat
fetch c1 into c;
if (b = 1) then
leave c1_repeat;
end if;
insert into t4 values (c);
until b = 1
end repeat;
end;
end if;
if arg1 = 'b' then
begin
declare c2 cursor for select a from t3 where not a % 2;
declare continue handler for not found set b = 1;
set b = 0;
open c2;
c2_repeat: repeat
fetch c2 into c;
if (b = 1) then
leave c2_repeat;
end if;
insert into t4 values (c);
until b = 1
end repeat;
end;
end if;
end|
call bug12168('a')|
select * from t4|
a
1
3
truncate t4|
call bug12168('b')|
select * from t4|
a
2
4
truncate t4|
call bug12168('a')|
select * from t4|
a
1
3
truncate t4|
call bug12168('b')|
select * from t4|
a
2
4
truncate t4|
drop table t3, t4|
drop procedure if exists bug12168|
drop table if exists t3|
drop procedure if exists bug11333|
create table t3 (c1 char(128))|
insert into t3 values 
('AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA')|
create procedure bug11333(i int)
begin
declare tmp varchar(128);
set @x = 0;
repeat
select c1 into tmp from t3
where c1 = 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA';
set @x = @x + 1;
until @x >= i
end repeat;
end|
call bug11333(10)|
drop procedure bug11333|
drop table t3|
drop function if exists bug9048|
create function bug9048(f1 char binary) returns char
begin
set f1= concat( 'hello', f1 );
return f1;
end|
Warnings:
Warning	1287	'BINARY as attribute of a type' is deprecated and will be removed in a future release. Please use a CHARACTER SET clause with _bin collation instead
drop function bug9048|
create function bug9048(f1 char binary) returns char binary
begin
set f1= concat( 'hello', f1 );
return f1;
end|
ERROR 42000: This version of MySQL doesn't yet support 'return value collation'
drop procedure if exists bug12849_1|
create procedure bug12849_1(inout x char) select x into x|
set @var='a'|
call bug12849_1(@var)|
select @var|
@var
a
drop procedure bug12849_1|
drop procedure if exists bug12849_2|
create procedure bug12849_2(inout foo varchar(15))
begin
select concat(foo, foo) INTO foo;
end|
set @var='abcd'|
call bug12849_2(@var)|
select @var|
@var
abcdabcd
drop procedure bug12849_2|
drop procedure if exists bug131333|
drop function if exists bug131333|
create procedure bug131333()
begin
begin
declare a int;
select a;
set a = 1;
select a;
end;
begin
declare b int;
select b;
end;
end|
create function bug131333()
returns int
begin
begin
declare a int;
set a = 1;
end;
begin
declare b int;
return b;
end;
end|
call bug131333()|
a
NULL
a
1
b
NULL
select bug131333()|
bug131333()
NULL
drop procedure bug131333|
drop function bug131333|
drop function if exists bug12379|
drop procedure if exists bug12379_1|
drop procedure if exists bug12379_2|
drop procedure if exists bug12379_3|
drop table if exists t3|
create table t3 (c1 char(1) primary key not null)|
create function bug12379()
returns integer
begin
insert into t3 values('X');
insert into t3 values('X');
return 0;
end|
create procedure bug12379_1()
begin
declare exit handler for sqlexception select 42;
select bug12379();
END|
create procedure bug12379_2()
begin
declare exit handler for sqlexception begin end;
select bug12379();
end|
create procedure bug12379_3()
begin
select bug12379();
end|
select bug12379()|
ERROR 23000: Duplicate entry 'X' for key 'PRIMARY'
select 1|
1
1
call bug12379_1()|
bug12379()
42
42
select 2|
2
2
call bug12379_2()|
bug12379()
select 3|
3
3
call bug12379_3()|
ERROR 23000: Duplicate entry 'X' for key 'PRIMARY'
select 4|
4
4
drop function bug12379|
drop procedure bug12379_1|
drop procedure bug12379_2|
drop procedure bug12379_3|
drop table t3|
drop procedure if exists bug13124|
create procedure bug13124()
begin
declare y integer;
set @x=y;
end|
call bug13124()|
drop procedure  bug13124|
drop procedure if exists bug12979_1|
create procedure bug12979_1(inout d decimal(5)) set d = d / 2|
set @bug12979_user_var = NULL|
call bug12979_1(@bug12979_user_var)|
drop procedure bug12979_1|
drop procedure if exists bug12979_2|
create procedure bug12979_2()
begin
declare internal_var decimal(5);
set internal_var= internal_var / 2;
select internal_var;
end|
call bug12979_2()|
internal_var
NULL
drop procedure bug12979_2|
drop table if exists t3|
drop procedure if exists bug6127|
create table t3 (s1 int unique)|
set @sm=@@sql_mode|
set sql_mode='traditional'|
create procedure bug6127()
begin
declare continue handler for sqlstate '23000'
    begin
declare continue handler for sqlstate '22003'
        insert into t3 values (0);
insert into t3 values (1000000000000000);
end;
insert into t3 values (1);
insert into t3 values (1);
end|
call bug6127()|
select * from t3|
s1
0
1
call bug6127()|
ERROR 23000: Duplicate entry '0' for key 's1'
select * from t3|
s1
0
1
set sql_mode=@sm|
drop table t3|
drop procedure bug6127|
drop procedure if exists bug12589_1|
drop procedure if exists bug12589_2|
drop procedure if exists bug12589_3|
create procedure bug12589_1()
begin
declare spv1 decimal(3,3);
set spv1= 123.456;
set spv1 = 'test';
create temporary table tm1 as select spv1;
show create table tm1;
drop temporary table tm1;
end|
create procedure bug12589_2()
begin
declare spv1 decimal(6,3);
set spv1= 123.456;
create temporary table tm1 as select spv1;
show create table tm1;
drop temporary table tm1;
end|
create procedure bug12589_3()
begin
declare spv1 decimal(6,3);
set spv1= -123.456;
create temporary table tm1 as select spv1;
show create table tm1;
drop temporary table tm1;
end|
call bug12589_1()|
Table	Create Table
tm1	CREATE TEMPORARY TABLE `tm1` (
  `spv1` decimal(3,3) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
call bug12589_2()|
Table	Create Table
tm1	CREATE TEMPORARY TABLE `tm1` (
  `spv1` decimal(6,3) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
call bug12589_3()|
Table	Create Table
tm1	CREATE TEMPORARY TABLE `tm1` (
  `spv1` decimal(6,3) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
drop procedure bug12589_1|
drop procedure bug12589_2|
drop procedure bug12589_3|
drop table if exists t3|
drop procedure if exists bug7049_1|
drop procedure if exists bug7049_2|
drop procedure if exists bug7049_3|
drop procedure if exists bug7049_4|
drop function if exists bug7049_1|
drop function if exists bug7049_2|
create table t3 ( x int unique )|
create procedure bug7049_1()
begin
insert into t3 values (42);
insert into t3 values (42);
end|
create procedure bug7049_2()
begin
declare exit handler for sqlexception
select 'Caught it' as 'Result';
call bug7049_1();
select 'Missed it' as 'Result';
end|
create procedure bug7049_3()
call bug7049_1()|
create procedure bug7049_4()
begin
declare exit handler for sqlexception
select 'Caught it' as 'Result';
call bug7049_3();
select 'Missed it' as 'Result';
end|
create function bug7049_1()
returns int
begin
insert into t3 values (42);
insert into t3 values (42);
return 42;
end|
create function bug7049_2()
returns int
begin
declare x int default 0;
declare continue handler for sqlexception
set x = 1;
set x = bug7049_1();
return x;
end|
call bug7049_2()|
Result
Caught it
select * from t3|
x
42
delete from t3|
call bug7049_4()|
Result
Caught it
select * from t3|
x
42
select bug7049_2()|
bug7049_2()
1
drop table t3|
drop procedure bug7049_1|
drop procedure bug7049_2|
drop procedure bug7049_3|
drop procedure bug7049_4|
drop function bug7049_1|
drop function bug7049_2|
drop function if exists bug13941|
drop procedure if exists bug13941|
create function bug13941(p_input_str text)
returns text
begin
declare p_output_str text;
set p_output_str = p_input_str;
set p_output_str = replace(p_output_str, 'xyzzy', 'plugh');
set p_output_str = replace(p_output_str, 'test', 'prova');
set p_output_str = replace(p_output_str, 'this', 'questo');
set p_output_str = replace(p_output_str, ' a ', 'una ');
set p_output_str = replace(p_output_str, 'is', '');
return p_output_str;
end|
create procedure bug13941(out sout varchar(128))
begin
set sout = 'Local';
set sout = ifnull(sout, 'DEF');
end|
select bug13941('this is a test')|
bug13941('this is a test')
questo una prova
call bug13941(@a)|
select @a|
@a
Local
drop function bug13941|
drop procedure bug13941|
DROP PROCEDURE IF EXISTS bug13095;
DROP TABLE IF EXISTS bug13095_t1;
DROP VIEW IF EXISTS bug13095_v1;
CREATE PROCEDURE bug13095(tbl_name varchar(32))
BEGIN
SET @str =
CONCAT("CREATE TABLE ", tbl_name, "(stuff char(15))");
SELECT @str;
PREPARE stmt FROM @str;
EXECUTE stmt;
SET @str =
CONCAT("INSERT INTO ", tbl_name, " VALUES('row1'),('row2'),('row3')" );
SELECT @str;
PREPARE stmt FROM @str;
EXECUTE stmt;
SET @str =
CONCAT("CREATE VIEW bug13095_v1(c1) AS SELECT stuff FROM ", tbl_name);
SELECT @str;
PREPARE stmt FROM @str;
EXECUTE stmt;
SELECT * FROM bug13095_v1;
SET @str =
"DROP VIEW bug13095_v1";
SELECT @str;
PREPARE stmt FROM @str;
EXECUTE stmt;
END|
CALL bug13095('bug13095_t1');
@str
CREATE TABLE bug13095_t1(stuff char(15))
@str
INSERT INTO bug13095_t1 VALUES('row1'),('row2'),('row3')
@str
CREATE VIEW bug13095_v1(c1) AS SELECT stuff FROM bug13095_t1
c1
row1
row2
row3
@str
DROP VIEW bug13095_v1
DROP PROCEDURE IF EXISTS bug13095;
DROP VIEW IF EXISTS bug13095_v1;
DROP TABLE IF EXISTS bug13095_t1;
drop function if exists bug14723|
drop procedure if exists bug14723|
/*!50003 create function bug14723()
returns bigint(20)
main_loop: begin
return 42;
end */;;
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
show create function bug14723;;
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug14723		CREATE DEFINER=`root`@`localhost` FUNCTION `bug14723`() RETURNS bigint(20)
main_loop: begin
return 42;
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
select bug14723();;
bug14723()
42
/*!50003 create procedure bug14723()
main_loop: begin
select 42;
end */;;
show create procedure bug14723;;
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug14723		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug14723`()
main_loop: begin
select 42;
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call bug14723();;
42
42
drop function bug14723|
drop procedure bug14723|
create procedure bug14845()
begin
declare a char(255);
declare done int default 0;
declare c cursor for select count(*) from t1 where 1 = 0;
declare continue handler for sqlstate '02000' set done = 1;
open c;
repeat
fetch c into a;
if not done then
select a;
end if;
until done end repeat;
close c;
end|
call bug14845()|
a
0
drop procedure bug14845|
drop procedure if exists bug13549_1|
drop procedure if exists bug13549_2|
CREATE PROCEDURE `bug13549_2`()
begin
call bug13549_1();
end|
CREATE PROCEDURE `bug13549_1`()
begin
declare done int default 0;
set done= not done;
end|
CALL bug13549_2()|
drop procedure bug13549_2|
drop procedure bug13549_1|
drop function if exists bug10100f|
drop procedure if exists bug10100p|
drop procedure if exists bug10100t|
drop procedure if exists bug10100pt|
drop procedure if exists bug10100pv|
drop procedure if exists bug10100pd|
drop procedure if exists bug10100pc|
create function bug10100f(prm int) returns int
begin
if prm > 1 then
return prm * bug10100f(prm - 1);
end if;
return 1;
end|
create procedure bug10100p(prm int, inout res int)
begin
set res = res * prm;
if prm > 1 then
call bug10100p(prm - 1, res);  
end if;
end|
create procedure bug10100t(prm int)
begin
declare res int;
set res = 1;
call bug10100p(prm, res);
select res;
end|
create table t3 (a int)|
insert into t3 values (0)|
create view v1 as select a from t3|
create procedure bug10100pt(level int, lim int)
begin
if level < lim then
update t3 set a=level;
FLUSH TABLES;
call bug10100pt(level+1, lim);
else
select * from t3;
end if;
end|
create procedure bug10100pv(level int, lim int)
begin
if level < lim then
update v1 set a=level;
FLUSH TABLES;
call bug10100pv(level+1, lim);
else
select * from v1;
end if;
end|
prepare stmt2 from "select * from t3;"|
create procedure bug10100pd(level int, lim int)
begin
if level < lim then
select level;
prepare stmt1 from "update t3 set a=a+2";
execute stmt1;
FLUSH TABLES;
execute stmt1;
FLUSH TABLES;
execute stmt1;
FLUSH TABLES;
deallocate prepare stmt1;
execute stmt2;
select * from t3;
call bug10100pd(level+1, lim);
else
execute stmt2;
end if;
end|
create procedure bug10100pc(level int, lim int)
begin
declare lv int;
declare c cursor for select a from t3;
open c;
if level < lim then
select level;
fetch c into lv;
select lv;
update t3 set a=level+lv;
FLUSH TABLES;
call bug10100pc(level+1, lim);
else
select * from t3;
end if;
close c;
end|
set @@max_sp_recursion_depth=4|
select @@max_sp_recursion_depth|
@@max_sp_recursion_depth
4
select bug10100f(3)|
ERROR HY000: Recursive stored functions and triggers are not allowed.
select bug10100f(6)|
ERROR HY000: Recursive stored functions and triggers are not allowed.
call bug10100t(5)|
res
120
call bug10100pt(1,5)|
a
4
call bug10100pv(1,5)|
a
4
update t3 set a=1|
call bug10100pd(1,5)|
level
1
a
7
a
7
level
2
a
13
a
13
level
3
a
19
a
19
level
4
a
25
a
25
a
25
select * from t3|
a
25
update t3 set a=1|
call bug10100pc(1,5)|
level
1
lv
1
level
2
lv
2
level
3
lv
4
level
4
lv
7
a
11
select * from t3|
a
11
set @@max_sp_recursion_depth=0|
select @@max_sp_recursion_depth|
@@max_sp_recursion_depth
0
select bug10100f(5)|
ERROR HY000: Recursive stored functions and triggers are not allowed.
call bug10100t(5)|
ERROR HY000: Recursive limit 0 (as set by the max_sp_recursion_depth variable) was exceeded for routine bug10100p
deallocate prepare stmt2|
drop function bug10100f|
drop procedure bug10100p|
drop procedure bug10100t|
drop procedure bug10100pt|
drop procedure bug10100pv|
drop procedure bug10100pd|
drop procedure bug10100pc|
drop view v1|
drop procedure if exists bug13729|
drop table if exists t3|
create table t3 (s1 int, primary key (s1))|
insert into t3 values (1),(2)|
create procedure bug13729()
begin
declare continue handler for sqlexception select 55;
update t3 set s1 = 1;
end|
call bug13729()|
55
55
select * from t3|
s1
1
2
drop procedure bug13729|
drop table t3|
drop procedure if exists bug14643_1|
drop procedure if exists bug14643_2|
create procedure bug14643_1()
begin
declare continue handler for sqlexception select 'boo' as 'Handler';
begin
declare v int default undefined_var;
if v = 1 then
select 1;
else
select v, isnull(v);
end if;
end;
end|
create procedure bug14643_2()
begin
declare continue handler for sqlexception select 'boo' as 'Handler';
case undefined_var
when 1 then
select 1;
else
select 2;
end case;
select undefined_var;
end|
call bug14643_1()|
Handler
boo
v	isnull(v)
NULL	1
call bug14643_2()|
Handler
boo
Handler
boo
drop procedure bug14643_1|
drop procedure bug14643_2|
drop procedure if exists bug14304|
drop table if exists t3, t4|
create table t3(a int primary key auto_increment)|
create table t4(a int primary key auto_increment)|
create procedure bug14304()
begin
insert into t3 set a=null;
insert into t4 set a=null;
insert into t4 set a=null;
insert into t4 set a=null;
insert into t4 set a=null;
insert into t4 set a=null;
insert into t4 select null as a;
insert into t3 set a=null;
insert into t3 set a=null;
select * from t3;
end|
call bug14304()|
a
1
2
3
drop procedure bug14304|
drop table t3, t4|
drop procedure if exists bug14376|
create procedure bug14376()
begin
declare x int default x;
end|
call bug14376()|
ERROR 42S22: Unknown column 'x' in 'field list'
drop procedure bug14376|
create procedure bug14376()
begin
declare x int default 42;
begin
declare x int default x;
select x;
end;
end|
call bug14376()|
x
42
drop procedure bug14376|
create procedure bug14376(x int)
begin
declare x int default x;
select x;
end|
call bug14376(4711)|
x
4711
drop procedure bug14376|
drop procedure if exists bug5967|
drop table if exists t3|
create table t3 (a varchar(255)) engine=myisam|
insert into t3 (a) values ("a - table column")|
create procedure bug5967(a varchar(255))
begin
declare i varchar(255);
declare c cursor for select a from t3;
select a;
select a from t3 into i;
select i as 'Parameter takes precedence over table column';                     open c;
fetch c into i;
close c;
select i as 'Parameter takes precedence over table column in cursors';
begin
declare a varchar(255) default 'a - local variable';
declare c1 cursor for select a from t3;
select a as 'A local variable takes precedence over parameter';
open c1;
fetch c1 into i;
close c1;
select i as 'A local variable takes precedence over parameter in cursors';
begin
declare a varchar(255) default 'a - local variable in a nested compound statement';
declare c2 cursor for select a from t3;
select a as 'A local variable in a nested compound statement takes precedence over a local variable in the outer statement';
select a from t3 into i;
select i as  'A local variable in a nested compound statement takes precedence over table column';
open c2;
fetch c2 into i;
close c2;
select i as  'A local variable in a nested compound statement takes precedence over table column in cursors';
end;
end;
end|
call bug5967("a - stored procedure parameter")|
a
a - stored procedure parameter
Parameter takes precedence over table column
a - stored procedure parameter
Parameter takes precedence over table column in cursors
a - stored procedure parameter
A local variable takes precedence over parameter
a - local variable
A local variable takes precedence over parameter in cursors
a - local variable
A local variable in a nested compound statement takes precedence over a local variable in the outer statement
a - local variable in a nested compound statement
A local variable in a nested compound statement takes precedence over table column
a - local variable in a nested compound statement
A local variable in a nested compound statement takes precedence over table column in cursors
a - local variable in a nested compound statement
drop procedure bug5967|
drop procedure if exists bug13012|
create procedure bug13012()
BEGIN
REPAIR TABLE t1;
END|
call bug13012()|
Table	Op	Msg_type	Msg_text
test.t1	repair	status	OK
drop procedure bug13012|
create view v1 as select * from t1|
create procedure bug13012()
BEGIN
REPAIR TABLE t1,t2,t3,v1;
OPTIMIZE TABLE t1,t2,t3,v1;
ANALYZE TABLE t1,t2,t3,v1;
END|
call bug13012()|
Table	Op	Msg_type	Msg_text
test.t1	repair	status	OK
test.t2	repair	status	OK
test.t3	repair	status	OK
test.v1	repair	Error	'test.v1' is not BASE TABLE
test.v1	repair	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	optimize	status	OK
test.t2	optimize	status	OK
test.t3	optimize	status	OK
test.v1	optimize	Error	'test.v1' is not BASE TABLE
test.v1	optimize	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Table is already up to date
test.t2	analyze	status	Table is already up to date
test.t3	analyze	status	Table is already up to date
test.v1	analyze	Error	'test.v1' is not BASE TABLE
test.v1	analyze	status	Operation failed
call bug13012()|
Table	Op	Msg_type	Msg_text
test.t1	repair	status	OK
test.t2	repair	status	OK
test.t3	repair	status	OK
test.v1	repair	Error	'test.v1' is not BASE TABLE
test.v1	repair	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	optimize	status	OK
test.t2	optimize	status	OK
test.t3	optimize	status	OK
test.v1	optimize	Error	'test.v1' is not BASE TABLE
test.v1	optimize	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Table is already up to date
test.t2	analyze	status	Table is already up to date
test.t3	analyze	status	Table is already up to date
test.v1	analyze	Error	'test.v1' is not BASE TABLE
test.v1	analyze	status	Operation failed
call bug13012()|
Table	Op	Msg_type	Msg_text
test.t1	repair	status	OK
test.t2	repair	status	OK
test.t3	repair	status	OK
test.v1	repair	Error	'test.v1' is not BASE TABLE
test.v1	repair	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	optimize	status	OK
test.t2	optimize	status	OK
test.t3	optimize	status	OK
test.v1	optimize	Error	'test.v1' is not BASE TABLE
test.v1	optimize	status	Operation failed
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Table is already up to date
test.t2	analyze	status	Table is already up to date
test.t3	analyze	status	Table is already up to date
test.v1	analyze	Error	'test.v1' is not BASE TABLE
test.v1	analyze	status	Operation failed
drop procedure bug13012|
drop view v1|
select * from t1 order by data|
id	data
aa	0
aa	1
aa	2
aa	3
aa	4
aa	5
aa	6
aa	7
aa	8
aa	9
drop schema if exists mysqltest1|
Warnings:
Note	1008	Can't drop database 'mysqltest1'; database doesn't exist
drop schema if exists mysqltest2|
Warnings:
Note	1008	Can't drop database 'mysqltest2'; database doesn't exist
drop schema if exists mysqltest3|
Warnings:
Note	1008	Can't drop database 'mysqltest3'; database doesn't exist
create schema mysqltest1|
create schema mysqltest2|
create schema mysqltest3|
use mysqltest3|
create procedure mysqltest1.p1 (out prequestid varchar(100))
begin
call mysqltest2.p2('call mysqltest3.p3(1, 2)');
end|
create procedure mysqltest2.p2(in psql text)
begin
declare lsql text;
set @lsql= psql;
prepare lstatement from @lsql;
execute lstatement;
deallocate prepare lstatement;
end|
create procedure mysqltest3.p3(in p1 int)
begin
select p1;
end|
call mysqltest1.p1(@rs)|
ERROR 42000: Incorrect number of arguments for PROCEDURE mysqltest3.p3; expected 1, got 2
call mysqltest1.p1(@rs)|
ERROR 42000: Incorrect number of arguments for PROCEDURE mysqltest3.p3; expected 1, got 2
call mysqltest1.p1(@rs)|
ERROR 42000: Incorrect number of arguments for PROCEDURE mysqltest3.p3; expected 1, got 2
drop schema if exists mysqltest1|
drop schema if exists mysqltest2|
drop schema if exists mysqltest3|
use test|
drop table if exists t3|
drop procedure if exists bug15441|
create table t3 (id int not null primary key, county varchar(25))|
insert into t3 (id, county) values (1, 'York')|
create procedure bug15441(c varchar(25))
begin
update t3 set id=2, county=values(c);
end|
call bug15441('county')|
ERROR 42S22: Unknown column 'c' in 'field list'
drop procedure bug15441|
create procedure bug15441(county varchar(25))
begin
declare c varchar(25) default "hello";
insert into t3 (id, county) values (1, county)
on duplicate key update county= values(county);
select * from t3;
update t3 set id=2, county=values(id);
select * from t3;
end|
call bug15441('Yale')|
id	county
1	Yale
id	county
2	NULL
drop table t3|
drop procedure bug15441|
drop procedure if exists bug14498_1|
drop procedure if exists bug14498_2|
drop procedure if exists bug14498_3|
drop procedure if exists bug14498_4|
drop procedure if exists bug14498_5|
create procedure bug14498_1()
begin
declare continue handler for sqlexception select 'error' as 'Handler';
if v then
select 'yes' as 'v';
else
select 'no' as 'v';
end if;
select 'done' as 'End';
end|
create procedure bug14498_2()
begin
declare continue handler for sqlexception select 'error' as 'Handler';
while v do
select 'yes' as 'v';
end while;
select 'done' as 'End';
end|
create procedure bug14498_3()
begin
declare continue handler for sqlexception select 'error' as 'Handler';
repeat
select 'maybe' as 'v';
until v end repeat;
select 'done' as 'End';
end|
create procedure bug14498_4()
begin
declare continue handler for sqlexception select 'error' as 'Handler';
case v
when 1 then
select '1' as 'v';
when 2 then
select '2' as 'v';
else
select '?' as 'v';
end case;
select 'done' as 'End';
end|
create procedure bug14498_5()
begin
declare continue handler for sqlexception select 'error' as 'Handler';
case
when v = 1 then
select '1' as 'v';
when v = 2 then
select '2' as 'v';
else
select '?' as 'v';
end case;
select 'done' as 'End';
end|
call bug14498_1()|
Handler
error
End
done
call bug14498_2()|
Handler
error
End
done
call bug14498_3()|
v
maybe
Handler
error
End
done
call bug14498_4()|
Handler
error
End
done
call bug14498_5()|
Handler
error
End
done
drop procedure bug14498_1|
drop procedure bug14498_2|
drop procedure bug14498_3|
drop procedure bug14498_4|
drop procedure bug14498_5|
drop table if exists t3|
drop procedure if exists bug15231_1|
drop procedure if exists bug15231_2|
drop procedure if exists bug15231_3|
drop procedure if exists bug15231_4|
drop procedure if exists bug15231_5|
drop procedure if exists bug15231_6|
create table t3 (id int not null)|
create procedure bug15231_1()
begin
declare xid integer;
declare xdone integer default 0;
declare continue handler for not found set xdone = 1;
set xid=null;
call bug15231_2(xid);
select xid, xdone;
end|
create procedure bug15231_2(inout ioid integer)
begin
select "Before NOT FOUND condition is triggered" as '1';
select id into ioid from t3 where id=ioid;
select "After NOT FOUND condtition is triggered" as '2';
if ioid is null then
set ioid=1;
end if;
end|
create procedure bug15231_3()
begin
declare exit handler for sqlwarning
select 'Caught it (correct)' as 'Result';
call bug15231_4();
end|
create procedure bug15231_4()
begin
declare x decimal(2,1);
set x = 'zap';
select 'Missed it (correct)' as 'Result';
show warnings;
end|
create procedure bug15231_5()
begin
declare exit handler for sqlwarning
select 'Caught it (wrong)' as 'Result';
call bug15231_6();
end|
create procedure bug15231_6()
begin
declare x decimal(2,1);
set x = 'zap';
select 'Missed it (correct)' as 'Result';
select id from t3;
end|
call bug15231_1()|
1
Before NOT FOUND condition is triggered
2
After NOT FOUND condtition is triggered
xid	xdone
1	0
call bug15231_3()|
Result
Missed it (correct)
Level	Code	Message
call bug15231_5()|
Result
Missed it (correct)
id
drop table t3|
drop procedure bug15231_1|
drop procedure bug15231_2|
drop procedure bug15231_3|
drop procedure bug15231_4|
drop procedure bug15231_5|
drop procedure bug15231_6|
drop procedure if exists bug15011|
create table t3 (c1 int primary key)|
insert into t3 values (1)|
create procedure bug15011()
deterministic
begin
declare continue handler for 1062
select 'Outer' as 'Handler';
begin
declare continue handler for 1062
select 'Inner' as 'Handler';
insert into t3 values (1);
end;
end|
call bug15011()|
Handler
Inner
drop procedure bug15011|
drop table t3|
drop procedure if exists bug17476|
create table t3 ( d date )|
insert into t3 values
( '2005-01-01' ), ( '2005-01-02' ), ( '2005-01-03' ),
( '2005-01-04' ), ( '2005-02-01' ), ( '2005-02-02' )|
create procedure bug17476(pDateFormat varchar(10))
select date_format(t3.d, pDateFormat), count(*)
from t3 
group by date_format(t3.d, pDateFormat)|
call bug17476('%Y-%m')|
date_format(t3.d, pDateFormat)	count(*)
2005-01	4
2005-02	2
call bug17476('%Y-%m')|
date_format(t3.d, pDateFormat)	count(*)
2005-01	4
2005-02	2
drop table t3|
drop procedure bug17476|
drop table if exists t3|
drop procedure if exists bug16887|
create table t3 ( c varchar(1) )|
insert into t3 values
(' '),('.'),(';'),(','),('-'),('_'),('('),(')'),('/'),('\\')|
create procedure bug16887()
begin
declare i int default 10;
again:
while i > 0 do
begin
declare breakchar varchar(1);
declare done int default 0;
declare t3_cursor cursor for select c from t3;
declare continue handler for not found set done = 1;
set i = i - 1;
select i;
if i = 3 then
iterate again;
end if;
open t3_cursor;
loop
fetch t3_cursor into breakchar;
if done = 1 then
begin
close t3_cursor;
iterate again;
end;
end if;
end loop;
end;
end while;
end|
call bug16887()|
i
9
i
8
i
7
i
6
i
5
i
4
i
3
i
2
i
1
i
0
drop table t3|
drop procedure bug16887|
drop procedure if exists bug16474_1|
drop procedure if exists bug16474_2|
delete from t1|
insert into t1 values ('c', 2), ('b', 3), ('a', 1)|
create procedure bug16474_1()
begin
declare x int;
select id from t1 order by x, id;
end|
drop procedure if exists bug14945|
create table t3 (id int not null auto_increment primary key)|
create procedure bug14945() deterministic truncate t3|
insert into t3 values (null)|
call bug14945()|
insert into t3 values (null)|
select * from t3|
id
1
drop table t3|
drop procedure bug14945|
create procedure bug16474_2(x int)
select id from t1 order by x, id|
call bug16474_1()|
id
a
b
c
call bug16474_2(1)|
id
a
b
c
call bug16474_2(2)|
id
a
b
c
drop procedure bug16474_1|
drop procedure bug16474_2|
set @x = 2|
select * from t1 order by @x, data|
id	data
a	1
c	2
b	3
delete from t1|
drop function if exists bug15728|
drop table if exists t3|
create table t3 (
id int not null auto_increment,
primary key (id)
)|
create function bug15728() returns int(11)
return last_insert_id()|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
insert into t3 values (0)|
select last_insert_id()|
last_insert_id()
1
select bug15728()|
bug15728()
1
drop function bug15728|
drop table t3|
drop procedure if exists bug18787|
create procedure bug18787()
begin
declare continue handler for sqlexception begin end;
select no_such_function();
end|
call bug18787()|
drop procedure bug18787|
create database bug18344_012345678901|
use bug18344_012345678901|
create procedure bug18344() begin end|
create procedure bug18344_2() begin end|
create database bug18344_0123456789012|
use bug18344_0123456789012|
create procedure bug18344() begin end|
create procedure bug18344_2() begin end|
use test|
select schema_name from information_schema.schemata where 
schema_name like 'bug18344%'|
SCHEMA_NAME
bug18344_012345678901
bug18344_0123456789012
select routine_name,routine_schema from information_schema.routines where
routine_schema like 'bug18344%'|
ROUTINE_NAME	ROUTINE_SCHEMA
bug18344	bug18344_012345678901
bug18344_2	bug18344_012345678901
bug18344	bug18344_0123456789012
bug18344_2	bug18344_0123456789012
drop database bug18344_012345678901|
drop database bug18344_0123456789012|
select schema_name from information_schema.schemata where 
schema_name like 'bug18344%'|
SCHEMA_NAME
select routine_name,routine_schema from information_schema.routines where
routine_schema like 'bug18344%'|
ROUTINE_NAME	ROUTINE_SCHEMA
drop function if exists bug12472|
create function bug12472() returns int return (select count(*) from t1)|
create table t3 as select bug12472() as i|
show create table t3|
Table	Create Table
t3	CREATE TABLE `t3` (
  `i` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
select * from t3|
i
0
drop table t3|
create view v1 as select bug12472() as j|
create table t3 as select * from v1|
show create table t3|
Table	Create Table
t3	CREATE TABLE `t3` (
  `j` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
select * from t3|
j
0
drop table t3|
drop view v1|
drop function bug12472|
DROP FUNCTION IF EXISTS bug18589_f1|
DROP PROCEDURE IF EXISTS bug18589_p1|
DROP PROCEDURE IF EXISTS bug18589_p2|
CREATE FUNCTION bug18589_f1(arg TEXT) RETURNS TEXT
BEGIN
RETURN CONCAT(arg, "");
END|
CREATE PROCEDURE bug18589_p1(arg TEXT, OUT ret TEXT)
BEGIN
SET ret = CONCAT(arg, "");
END|
CREATE PROCEDURE bug18589_p2(arg TEXT)
BEGIN
DECLARE v TEXT;
CALL bug18589_p1(arg, v);
SELECT v;
END|
SELECT bug18589_f1(REPEAT("a", 767))|
bug18589_f1(REPEAT("a", 767))
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
SET @bug18589_v1 = ""|
CALL bug18589_p1(REPEAT("a", 767), @bug18589_v1)|
SELECT @bug18589_v1|
@bug18589_v1
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
CALL bug18589_p2(REPEAT("a", 767))|
v
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
DROP FUNCTION bug18589_f1|
DROP PROCEDURE bug18589_p1|
DROP PROCEDURE bug18589_p2|
DROP FUNCTION IF EXISTS bug18037_f1|
DROP PROCEDURE IF EXISTS bug18037_p1|
DROP PROCEDURE IF EXISTS bug18037_p2|
CREATE FUNCTION bug18037_f1() RETURNS INT
BEGIN
RETURN @@server_id;
END|
CREATE PROCEDURE bug18037_p1()
BEGIN
DECLARE v INT DEFAULT @@server_id;
END|
CREATE PROCEDURE bug18037_p2()
BEGIN
CASE @@server_id
WHEN -1 THEN
SELECT 0;
ELSE
SELECT 1;
END CASE;
END|
SELECT bug18037_f1()|
bug18037_f1()
1
CALL bug18037_p1()|
CALL bug18037_p2()|
1
1
DROP FUNCTION bug18037_f1|
DROP PROCEDURE bug18037_p1|
DROP PROCEDURE bug18037_p2|
use test|
create table t3 (i int)|
insert into t3 values (1), (2)|
create database mysqltest1|
use mysqltest1|
create function bug17199() returns varchar(2) deterministic return 'ok'|
use test|
select *, mysqltest1.bug17199() from t3|
i	mysqltest1.bug17199()
1	ok
2	ok
use mysqltest1|
create function bug18444(i int) returns int no sql deterministic return i + 1|
use test|
select mysqltest1.bug18444(i) from t3|
mysqltest1.bug18444(i)
2
3
drop database mysqltest1|
create database mysqltest1 charset=utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
create database mysqltest2 charset=utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
create procedure mysqltest1.p1()
begin
-- alters the default collation of database test 
alter database character set koi8r;
end|
use mysqltest1|
call p1()|
show create database mysqltest1|
Database	Create Database
mysqltest1	CREATE DATABASE `mysqltest1` /*!40100 DEFAULT CHARACTER SET koi8r */ /*!80016 DEFAULT ENCRYPTION='N' */
show create database mysqltest2|
Database	Create Database
mysqltest2	CREATE DATABASE `mysqltest2` /*!40100 DEFAULT CHARACTER SET utf8 */ /*!80016 DEFAULT ENCRYPTION='N' */
alter database mysqltest1 character set utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
use mysqltest2|
call mysqltest1.p1()|
show create database mysqltest1|
Database	Create Database
mysqltest1	CREATE DATABASE `mysqltest1` /*!40100 DEFAULT CHARACTER SET koi8r */ /*!80016 DEFAULT ENCRYPTION='N' */
show create database mysqltest2|
Database	Create Database
mysqltest2	CREATE DATABASE `mysqltest2` /*!40100 DEFAULT CHARACTER SET utf8 */ /*!80016 DEFAULT ENCRYPTION='N' */
drop database mysqltest1|
drop database mysqltest2|
use test|
drop table if exists t3|
drop procedure if exists bug15217|
create table t3 as select 1|
create procedure bug15217()
begin
declare var1 char(255);
declare cur1 cursor for select * from t3;
open cur1;
fetch cur1 into var1;
select concat('data was: /', var1, '/');
close cur1;
end |
call bug15217()|
concat('data was: /', var1, '/')
data was: /1/
flush tables |
call bug15217()|
concat('data was: /', var1, '/')
data was: /1/
drop table t3|
drop procedure bug15217|
DROP PROCEDURE IF EXISTS bug21013 |
CREATE PROCEDURE bug21013(IN lim INT)
BEGIN
DECLARE i INT DEFAULT 0;
WHILE (i < lim) DO
SET @b = LOCATE(_latin1'b', @a, 1);
SET i = i + 1;
END WHILE;
END |
SET @a = _latin2"aaaaaaaaaa" |
CALL bug21013(10) |
DROP PROCEDURE bug21013 |
DROP DATABASE IF EXISTS mysqltest1|
DROP DATABASE IF EXISTS mysqltest2|
CREATE DATABASE mysqltest1 DEFAULT CHARACTER SET utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
CREATE DATABASE mysqltest2 DEFAULT CHARACTER SET utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
use mysqltest1|
CREATE FUNCTION bug16211_f1() RETURNS CHAR(10)
RETURN ""|
CREATE FUNCTION bug16211_f2() RETURNS CHAR(10) CHARSET koi8r
RETURN ""|
CREATE FUNCTION mysqltest2.bug16211_f3() RETURNS CHAR(10)
RETURN ""|
CREATE FUNCTION mysqltest2.bug16211_f4() RETURNS CHAR(10) CHARSET koi8r
RETURN ""|
SHOW CREATE FUNCTION bug16211_f1|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f1		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f1`() RETURNS char(10) CHARSET utf8
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION bug16211_f2|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f2		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f2`() RETURNS char(10) CHARSET koi8r
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION mysqltest2.bug16211_f3|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f3		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f3`() RETURNS char(10) CHARSET utf8
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION mysqltest2.bug16211_f4|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f4		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f4`() RETURNS char(10) CHARSET koi8r
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest1" AND ROUTINE_NAME = "bug16211_f1"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest1" AND ROUTINE_NAME = "bug16211_f2"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest2" AND ROUTINE_NAME = "bug16211_f3"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest2" AND ROUTINE_NAME = "bug16211_f4"|
DTD_IDENTIFIER
char(10)
SELECT CHARSET(bug16211_f1())|
CHARSET(bug16211_f1())
utf8
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
SELECT CHARSET(bug16211_f2())|
CHARSET(bug16211_f2())
koi8r
SELECT CHARSET(mysqltest2.bug16211_f3())|
CHARSET(mysqltest2.bug16211_f3())
utf8
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
SELECT CHARSET(mysqltest2.bug16211_f4())|
CHARSET(mysqltest2.bug16211_f4())
koi8r
ALTER DATABASE mysqltest1 CHARACTER SET cp1251|
ALTER DATABASE mysqltest2 CHARACTER SET cp1251|
SHOW CREATE FUNCTION bug16211_f1|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f1		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f1`() RETURNS char(10) CHARSET utf8
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION bug16211_f2|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f2		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f2`() RETURNS char(10) CHARSET koi8r
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION mysqltest2.bug16211_f3|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f3		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f3`() RETURNS char(10) CHARSET utf8
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SHOW CREATE FUNCTION mysqltest2.bug16211_f4|
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
bug16211_f4		CREATE DEFINER=`root`@`localhost` FUNCTION `bug16211_f4`() RETURNS char(10) CHARSET koi8r
RETURN ""	utf8mb4	utf8mb4_0900_ai_ci	utf8_general_ci
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest1" AND ROUTINE_NAME = "bug16211_f1"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest1" AND ROUTINE_NAME = "bug16211_f2"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest2" AND ROUTINE_NAME = "bug16211_f3"|
DTD_IDENTIFIER
char(10)
SELECT dtd_identifier
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = "mysqltest2" AND ROUTINE_NAME = "bug16211_f4"|
DTD_IDENTIFIER
char(10)
SELECT CHARSET(bug16211_f1())|
CHARSET(bug16211_f1())
utf8
SELECT CHARSET(bug16211_f2())|
CHARSET(bug16211_f2())
koi8r
SELECT CHARSET(mysqltest2.bug16211_f3())|
CHARSET(mysqltest2.bug16211_f3())
utf8
SELECT CHARSET(mysqltest2.bug16211_f4())|
CHARSET(mysqltest2.bug16211_f4())
koi8r
use test|
DROP DATABASE mysqltest1|
DROP DATABASE mysqltest2|
CREATE DATABASE mysqltest1 DEFAULT CHARACTER SET utf8|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
use mysqltest1|
CREATE PROCEDURE bug16676_p1(
IN p1 CHAR(10),
INOUT p2 CHAR(10),
OUT p3 CHAR(10))
BEGIN
SELECT CHARSET(p1), COLLATION(p1);
SELECT CHARSET(p2), COLLATION(p2);
SELECT CHARSET(p3), COLLATION(p3);
END|
CREATE PROCEDURE bug16676_p2(
IN p1 CHAR(10) CHARSET koi8r,
INOUT p2 CHAR(10) CHARSET cp1251,
OUT p3 CHAR(10) CHARSET greek)
BEGIN
SELECT CHARSET(p1), COLLATION(p1);
SELECT CHARSET(p2), COLLATION(p2);
SELECT CHARSET(p3), COLLATION(p3);
END|
SET @v2 = 'b'|
SET @v3 = 'c'|
CALL bug16676_p1('a', @v2, @v3)|
CHARSET(p1)	COLLATION(p1)
utf8	utf8_general_ci
CHARSET(p2)	COLLATION(p2)
utf8	utf8_general_ci
CHARSET(p3)	COLLATION(p3)
utf8	utf8_general_ci
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
CALL bug16676_p2('a', @v2, @v3)|
CHARSET(p1)	COLLATION(p1)
koi8r	koi8r_general_ci
CHARSET(p2)	COLLATION(p2)
cp1251	cp1251_general_ci
CHARSET(p3)	COLLATION(p3)
greek	greek_general_ci
use test|
DROP DATABASE mysqltest1|
drop table if exists t3|
drop table if exists t4|
drop procedure if exists bug8153_subselect|
drop procedure if exists bug8153_subselect_a|
drop procedure if exists bug8153_subselect_b|
drop procedure if exists bug8153_proc_a|
drop procedure if exists bug8153_proc_b|
create table t3 (a int)|
create table t4 (a int)|
insert into t3 values (1), (1), (2), (3)|
insert into t4 values (1), (1)|
create procedure bug8153_subselect()
begin
declare continue handler for sqlexception
begin
select 'statement failed';
end;
update t3 set a=a+1 where (select a from t4 where a=1) is null;
select 'statement after update';
end|
call bug8153_subselect()|
statement failed
statement failed
statement after update
statement after update
select * from t3|
a
1
1
2
3
call bug8153_subselect()|
statement failed
statement failed
statement after update
statement after update
select * from t3|
a
1
1
2
3
drop procedure bug8153_subselect|
create procedure bug8153_subselect_a()
begin
declare continue handler for sqlexception
begin
select 'in continue handler';
end;
select 'reachable code a1';
call bug8153_subselect_b();
select 'reachable code a2';
end|
create procedure bug8153_subselect_b()
begin
select 'reachable code b1';
update t3 set a=a+1 where (select a from t4 where a=1) is null;
select 'unreachable code b2';
end|
call bug8153_subselect_a()|
reachable code a1
reachable code a1
reachable code b1
reachable code b1
in continue handler
in continue handler
reachable code a2
reachable code a2
select * from t3|
a
1
1
2
3
call bug8153_subselect_a()|
reachable code a1
reachable code a1
reachable code b1
reachable code b1
in continue handler
in continue handler
reachable code a2
reachable code a2
select * from t3|
a
1
1
2
3
drop procedure bug8153_subselect_a|
drop procedure bug8153_subselect_b|
create procedure bug8153_proc_a()
begin
declare continue handler for sqlexception
begin
select 'in continue handler';
end;
select 'reachable code a1';
call bug8153_proc_b();
select 'reachable code a2';
end|
create procedure bug8153_proc_b()
begin
select 'reachable code b1';
select no_such_function();
select 'unreachable code b2';
end|
call bug8153_proc_a()|
reachable code a1
reachable code a1
reachable code b1
reachable code b1
in continue handler
in continue handler
reachable code a2
reachable code a2
drop procedure bug8153_proc_a|
drop procedure bug8153_proc_b|
drop table t3|
drop table t4|
drop procedure if exists bug19862|
CREATE TABLE t11 (a INT)|
CREATE TABLE t12 (a INT)|
CREATE FUNCTION bug19862(x INT) RETURNS INT
BEGIN
INSERT INTO t11 VALUES (x);
RETURN x+1;
END|
INSERT INTO t12 VALUES (1), (2)|
SELECT bug19862(a) FROM t12 ORDER BY 1|
bug19862(a)
2
3
SELECT * FROM t11|
a
1
2
DROP TABLE t11, t12|
DROP FUNCTION bug19862|
drop table if exists t3|
drop database if exists mysqltest1|
create table t3 (a int)|
insert into t3 (a) values (1), (2)|
create database mysqltest1|
use mysqltest1|
drop database mysqltest1|
select database()|
database()
NULL
select * from (select 1 as a) as t1 natural join (select * from test.t3) as t2|
a
1
use test|
drop table t3|
DROP PROCEDURE IF EXISTS bug16899_p1|
DROP FUNCTION IF EXISTS bug16899_f1|
CREATE DEFINER=1234567890abcdefGHIKLsdafdsjakfhkshfkshsndvkjsddngjhasdkjghskahfdksjhcnsndkhjkghskjfjsdhfkhskfdhksjdhfkjshfksh@localhost PROCEDURE bug16899_p1()
BEGIN
SET @a = 1;
END|
ERROR HY000: String '1234567890abcdefGHIKLsdafdsjakfhkshfkshsndvkjsddngjhasdkjghskahfdksjhc' is too long for user name (should be no longer than 32)
CREATE DEFINER=some_user_name@host_1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij1234567890X
FUNCTION bug16899_f1() RETURNS INT
BEGIN
RETURN 1;
END|
ERROR HY000: String 'host_1234567890abcdefghij1234567890abcdefghij1234567890abcdefghij12345' is too long for host name (should be no longer than 255)
drop procedure if exists bug21416|
create procedure bug21416() show create procedure bug21416|
call bug21416()|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
bug21416		CREATE DEFINER=`root`@`localhost` PROCEDURE `bug21416`()
show create procedure bug21416	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure bug21416|
DROP PROCEDURE IF EXISTS bug21414|
CREATE PROCEDURE bug21414() SELECT 1|
FLUSH TABLES WITH READ LOCK|
DROP PROCEDURE bug21414|
ERROR HY000: Can't execute the query because you have a conflicting read lock
UNLOCK TABLES|
The following should succeed.
DROP PROCEDURE bug21414|
CREATE TABLE t3 (
Member_ID varchar(15) NOT NULL,
PRIMARY KEY (Member_ID)
)|
CREATE TABLE t4 (
ID int(10) unsigned NOT NULL auto_increment,
Member_ID varchar(15) NOT NULL default '',
Action varchar(12) NOT NULL,
Action_Date datetime NOT NULL,
Track varchar(15) default NULL,
User varchar(12) default NULL,
Date_Updated timestamp NOT NULL default CURRENT_TIMESTAMP on update
CURRENT_TIMESTAMP,
PRIMARY KEY (ID),
KEY Action (Action),
KEY Action_Date (Action_Date)
)|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
INSERT INTO t3(Member_ID) VALUES
('111111'), ('222222'), ('333333'), ('444444'), ('555555'), ('666666')|
INSERT INTO t4(Member_ID, Action, Action_Date, Track) VALUES
('111111', 'Disenrolled', '2006-03-01', 'CAD' ),
('111111', 'Enrolled', '2006-03-01', 'CAD' ),
('111111', 'Disenrolled', '2006-07-03', 'CAD' ),
('222222', 'Enrolled', '2006-03-07', 'CAD' ),
('222222', 'Enrolled', '2006-03-07', 'CHF' ),
('222222', 'Disenrolled', '2006-08-02', 'CHF' ),
('333333', 'Enrolled', '2006-03-01', 'CAD' ),
('333333', 'Disenrolled', '2006-03-01', 'CAD' ),
('444444', 'Enrolled', '2006-03-01', 'CAD' ),
('555555', 'Disenrolled', '2006-03-01', 'CAD' ),
('555555', 'Enrolled', '2006-07-21', 'CAD' ),
('555555', 'Disenrolled', '2006-03-01', 'CHF' ),
('666666', 'Enrolled', '2006-02-09', 'CAD' ),
('666666', 'Enrolled', '2006-05-12', 'CHF' ),
('666666', 'Disenrolled', '2006-06-01', 'CAD' )|
DROP FUNCTION IF EXISTS bug21493|
CREATE FUNCTION bug21493(paramMember VARCHAR(15)) RETURNS varchar(45)
BEGIN
DECLARE tracks VARCHAR(45);
SELECT GROUP_CONCAT(Track SEPARATOR ', ') INTO tracks FROM t4
WHERE Member_ID=paramMember AND Action='Enrolled' AND 
(Track,Action_Date) IN (SELECT Track, MAX(Action_Date) FROM t4
WHERE Member_ID=paramMember GROUP BY Track);
RETURN tracks;
END|
SELECT bug21493('111111')|
bug21493('111111')
NULL
SELECT bug21493('222222')|
bug21493('222222')
CAD
SELECT bug21493(Member_ID) FROM t3|
bug21493(Member_ID)
NULL
CAD
CAD
CAD
CAD
CHF
DROP FUNCTION bug21493|
DROP TABLE t3,t4|
drop function if exists func_20028_a|
drop function if exists func_20028_b|
drop function if exists func_20028_c|
drop procedure if exists proc_20028_a|
drop procedure if exists proc_20028_b|
drop procedure if exists proc_20028_c|
drop table if exists table_20028|
create table table_20028 (i int)|
SET @save_sql_mode=@@sql_mode|
SET sql_mode=''|
create function func_20028_a() returns integer
begin
declare temp integer;
select i into temp from table_20028 limit 1;
return ifnull(temp, 0);
end|
create function func_20028_b() returns integer
begin
return func_20028_a();
end|
create function func_20028_c() returns integer
begin
declare div_zero integer;
set SQL_MODE='TRADITIONAL';
select 1/0 into div_zero;
return div_zero;
end|
create procedure proc_20028_a()
begin
declare temp integer;
select i into temp from table_20028 limit 1;
end|
create procedure proc_20028_b()
begin
call proc_20028_a();
end|
create procedure proc_20028_c()
begin
declare div_zero integer;
set SQL_MODE='TRADITIONAL';
select 1/0 into div_zero;
end|
select func_20028_a()|
func_20028_a()
0
select func_20028_b()|
func_20028_b()
0
select func_20028_c()|
ERROR 22012: Division by 0
call proc_20028_a()|
Warnings:
Warning	1329	No data - zero rows fetched, selected, or processed
call proc_20028_b()|
Warnings:
Warning	1329	No data - zero rows fetched, selected, or processed
call proc_20028_c()|
ERROR 22012: Division by 0
SET sql_mode='TRADITIONAL'|
drop function func_20028_a|
drop function func_20028_b|
drop function func_20028_c|
drop procedure proc_20028_a|
drop procedure proc_20028_b|
drop procedure proc_20028_c|
create function func_20028_a() returns integer
begin
declare temp integer;
select i into temp from table_20028 limit 1;
return ifnull(temp, 0);
end|
create function func_20028_b() returns integer
begin
return func_20028_a();
end|
create function func_20028_c() returns integer
begin
declare div_zero integer;
set SQL_MODE='';
select 1/0 into div_zero;
return div_zero;
end|
create procedure proc_20028_a()
begin
declare temp integer;
select i into temp from table_20028 limit 1;
end|
create procedure proc_20028_b()
begin
call proc_20028_a();
end|
create procedure proc_20028_c()
begin
declare div_zero integer;
set SQL_MODE='';
select 1/0 into div_zero;
end|
select func_20028_a()|
func_20028_a()
0
select func_20028_b()|
func_20028_b()
0
select func_20028_c()|
func_20028_c()
NULL
call proc_20028_a()|
Warnings:
Warning	1329	No data - zero rows fetched, selected, or processed
call proc_20028_b()|
Warnings:
Warning	1329	No data - zero rows fetched, selected, or processed
call proc_20028_c()|
SET @@sql_mode=@save_sql_mode|
drop function func_20028_a|
drop function func_20028_b|
drop function func_20028_c|
drop procedure proc_20028_a|
drop procedure proc_20028_b|
drop procedure proc_20028_c|
drop table table_20028|
drop procedure if exists proc_21462_a|
drop procedure if exists proc_21462_b|
create procedure proc_21462_a()
begin
select "Called A";
end|
create procedure proc_21462_b(x int)
begin
select "Called B";
end|
call proc_21462_a|
Called A
Called A
call proc_21462_a()|
Called A
Called A
call proc_21462_a(1)|
ERROR 42000: Incorrect number of arguments for PROCEDURE test.proc_21462_a; expected 0, got 1
call proc_21462_b|
ERROR 42000: Incorrect number of arguments for PROCEDURE test.proc_21462_b; expected 1, got 0
call proc_21462_b()|
ERROR 42000: Incorrect number of arguments for PROCEDURE test.proc_21462_b; expected 1, got 0
call proc_21462_b(1)|
Called B
Called B
drop procedure proc_21462_a|
drop procedure proc_21462_b|
drop table if exists t3|
drop procedure if exists proc_bug19733|
create table t3 (s1 int)|
create procedure proc_bug19733()
begin
declare v int default 0;
while v < 100 do
create index i on t3 (s1);
drop index i on t3;
set v = v + 1;
end while;
end|
call proc_bug19733()|
call proc_bug19733()|
call proc_bug19733()|
drop procedure proc_bug19733|
drop table t3|
DROP PROCEDURE IF EXISTS p1|
DROP VIEW IF EXISTS v1, v2|
DROP TABLE IF EXISTS t3, t4|
CREATE TABLE t3 (t3_id INT)|
INSERT INTO t3 VALUES (0)|
INSERT INTO t3 VALUES (1)|
CREATE TABLE t4 (t4_id INT)|
INSERT INTO t4 VALUES (2)|
CREATE VIEW v1 AS
SELECT t3.t3_id, t4.t4_id
FROM t3 JOIN t4 ON t3.t3_id = 0|
CREATE VIEW v2 AS
SELECT t3.t3_id AS t3_id_1, v1.t3_id AS t3_id_2, v1.t4_id
FROM t3 LEFT JOIN v1 ON t3.t3_id = 0|
CREATE PROCEDURE p1() SELECT * FROM v2|
CALL p1()|
t3_id_1	t3_id_2	t4_id
0	0	2
1	NULL	NULL
CALL p1()|
t3_id_1	t3_id_2	t4_id
0	0	2
1	NULL	NULL
DROP PROCEDURE p1|
DROP VIEW v1, v2|
DROP TABLE t3, t4|
End of 5.0 tests
Begin of 5.1 tests
drop function if exists pi;
create function pi() returns varchar(50)
return "pie, my favorite desert.";
Warnings:
Note	1585	This function 'pi' has the same name as a native function
SET @save_sql_mode=@@sql_mode;
SET SQL_MODE='IGNORE_SPACE';
select pi(), pi ();
pi()	pi ()
3.141593	3.141593
select test.pi(), test.pi ();
test.pi()	test.pi ()
pie, my favorite desert.	pie, my favorite desert.
SET SQL_MODE='';
select pi(), pi ();
pi()	pi ()
3.141593	3.141593
select test.pi(), test.pi ();
test.pi()	test.pi ()
pie, my favorite desert.	pie, my favorite desert.
SET @@sql_mode=@save_sql_mode;
drop function pi;
drop function if exists test.database;
drop function if exists test.current_user;
drop function if exists test.md5;
create database nowhere;
use nowhere;
drop database nowhere;
SET @save_sql_mode=@@sql_mode;
SET SQL_MODE='IGNORE_SPACE';
select database(), database ();
database()	database ()
NULL	NULL
select current_user(), current_user ();
current_user()	current_user ()
root@localhost	root@localhost
select md5("aaa"), md5 ("aaa");
md5("aaa")	md5 ("aaa")
47bce5c74f589f4867dbd57e9ca9f808	47bce5c74f589f4867dbd57e9ca9f808
SET SQL_MODE='';
select database(), database ();
database()	database ()
NULL	NULL
select current_user(), current_user ();
current_user()	current_user ()
root@localhost	root@localhost
select md5("aaa"), md5 ("aaa");
md5("aaa")	md5 ("aaa")
47bce5c74f589f4867dbd57e9ca9f808	47bce5c74f589f4867dbd57e9ca9f808
use test;
create function `database`() returns varchar(50)
return "Stored function database";
Warnings:
Note	1585	This function 'database' has the same name as a native function
create function `current_user`() returns varchar(50)
return "Stored function current_user";
Warnings:
Note	1585	This function 'current_user' has the same name as a native function
create function md5(x varchar(50)) returns varchar(50)
return "Stored function md5";
Warnings:
Note	1585	This function 'md5' has the same name as a native function
SET SQL_MODE='IGNORE_SPACE';
select database(), database ();
database()	database ()
test	test
select current_user(), current_user ();
current_user()	current_user ()
root@localhost	root@localhost
select md5("aaa"), md5 ("aaa");
md5("aaa")	md5 ("aaa")
47bce5c74f589f4867dbd57e9ca9f808	47bce5c74f589f4867dbd57e9ca9f808
select test.database(), test.database ();
test.database()	test.database ()
Stored function database	Stored function database
select test.current_user(), test.current_user ();
test.current_user()	test.current_user ()
Stored function current_user	Stored function current_user
select test.md5("aaa"), test.md5 ("aaa");
test.md5("aaa")	test.md5 ("aaa")
Stored function md5	Stored function md5
SET SQL_MODE='';
select database(), database ();
database()	database ()
test	test
select current_user(), current_user ();
current_user()	current_user ()
root@localhost	root@localhost
select md5("aaa"), md5 ("aaa");
md5("aaa")	md5 ("aaa")
47bce5c74f589f4867dbd57e9ca9f808	47bce5c74f589f4867dbd57e9ca9f808
select test.database(), test.database ();
test.database()	test.database ()
Stored function database	Stored function database
select test.current_user(), test.current_user ();
test.current_user()	test.current_user ()
Stored function current_user	Stored function current_user
select test.md5("aaa"), test.md5 ("aaa");
test.md5("aaa")	test.md5 ("aaa")
Stored function md5	Stored function md5
SET @@sql_mode=@save_sql_mode;
drop function test.database;
drop function test.current_user;
drop function md5;
use test;
End of 5.1 tests
DROP TABLE IF EXISTS bug23760|
DROP TABLE IF EXISTS bug23760_log|
DROP PROCEDURE IF EXISTS bug23760_update_log|
DROP PROCEDURE IF EXISTS bug23760_test_row_count|
DROP FUNCTION IF EXISTS bug23760_rc_test|
CREATE TABLE bug23760 (
id INT NOT NULL AUTO_INCREMENT ,
num INT NOT NULL ,
PRIMARY KEY ( id ) 
)|
CREATE TABLE bug23760_log (
id INT NOT NULL AUTO_INCREMENT ,
reason VARCHAR(50)NULL ,
ammount INT NOT NULL ,
PRIMARY KEY ( id ) 
)|
CREATE PROCEDURE bug23760_update_log(r Varchar(50), a INT)
BEGIN
INSERT INTO bug23760_log (reason, ammount) VALUES(r, a);
END|
CREATE PROCEDURE bug23760_test_row_count()
BEGIN
UPDATE bug23760 SET num = num + 1;
CALL bug23760_update_log('Test is working', ROW_COUNT());
UPDATE bug23760 SET num = num - 1;
END|
CREATE PROCEDURE bug23760_test_row_count2(level INT)
BEGIN
IF level THEN
UPDATE bug23760 SET num = num + 1;
CALL bug23760_update_log('Test2 is working', ROW_COUNT());
CALL bug23760_test_row_count2(level - 1);
END IF;
END|
CREATE FUNCTION bug23760_rc_test(in_var INT) RETURNS INT RETURN in_var|
INSERT INTO bug23760 (num) VALUES (0), (1), (1), (2), (3), (5), (8)|
SELECT ROW_COUNT()|
ROW_COUNT()
7
CALL bug23760_test_row_count()|
SELECT * FROM bug23760_log ORDER BY id|
id	reason	ammount
1	Test is working	7
SET @save_max_sp_recursion= @@max_sp_recursion_depth|
SELECT @save_max_sp_recursion|
@save_max_sp_recursion
0
SET max_sp_recursion_depth= 5|
SELECT @@max_sp_recursion_depth|
@@max_sp_recursion_depth
5
CALL bug23760_test_row_count2(2)|
SELECT ROW_COUNT()|
ROW_COUNT()
1
SELECT * FROM bug23760_log ORDER BY id|
id	reason	ammount
1	Test is working	7
2	Test2 is working	7
3	Test2 is working	7
SELECT * FROM bug23760 ORDER by ID|
id	num
1	2
2	3
3	3
4	4
5	5
6	7
7	10
SET max_sp_recursion_depth= @save_max_sp_recursion|
SELECT bug23760_rc_test(123)|
bug23760_rc_test(123)
123
INSERT INTO bug23760 (num) VALUES (13), (21), (34), (55)|
SELECT bug23760_rc_test(ROW_COUNT())|
bug23760_rc_test(ROW_COUNT())
4
DROP TABLE bug23760, bug23760_log|
DROP PROCEDURE bug23760_update_log|
DROP PROCEDURE bug23760_test_row_count|
DROP PROCEDURE bug23760_test_row_count2|
DROP FUNCTION bug23760_rc_test|
DROP PROCEDURE IF EXISTS bug24117|
DROP TABLE IF EXISTS t3|
CREATE TABLE t3(c1 ENUM('abc'))|
INSERT INTO t3 VALUES('abc')|
CREATE PROCEDURE bug24117()
BEGIN
DECLARE t3c1 ENUM('abc');
DECLARE mycursor CURSOR FOR SELECT c1 FROM t3;
OPEN mycursor;
FLUSH TABLES;
FETCH mycursor INTO t3c1;
CLOSE mycursor;
END|
CALL bug24117()|
DROP PROCEDURE bug24117|
DROP TABLE t3|
drop function if exists func_8407_a|
drop function if exists func_8407_b|
create function func_8407_a() returns int
begin
declare x int;
declare continue handler for sqlexception
begin
end;
select 1 from no_such_view limit 1 into x;
return x;
end|
create function func_8407_b() returns int
begin
declare x int default 0;
declare continue handler for sqlstate '42S02'
  begin
set x:= x+1000;
end;
case (select 1 from no_such_view limit 1)
when 1 then set x:= x+1;
when 2 then set x:= x+2;
else set x:= x+100;
end case;
set x:=x + 500;
return x;
end|
select func_8407_a()|
func_8407_a()
NULL
select func_8407_b()|
func_8407_b()
1500
drop function func_8407_a|
drop function func_8407_b|
drop table if exists table_26503|
drop procedure if exists proc_26503_ok_1|
drop procedure if exists proc_26503_ok_2|
drop procedure if exists proc_26503_ok_3|
drop procedure if exists proc_26503_ok_4|
create table table_26503(a int unique)|
create procedure proc_26503_ok_1(v int)
begin
declare i int default 5;
declare continue handler for sqlexception
begin
select 'caught something';
retry:
while i > 0 do
begin
set i = i - 1;
select 'looping', i;
iterate retry;
select 'dead code';
end;
end while retry;
select 'leaving handler';
end;
select 'do something';
insert into table_26503 values (v);
select 'do something again';
insert into table_26503 values (v);
end|
create procedure proc_26503_ok_2(v int)
begin
declare i int default 5;
declare continue handler for sqlexception
begin
select 'caught something';
retry:
while i > 0 do
begin
set i = i - 1;
select 'looping', i;
leave retry;
select 'dead code';
end;
end while;
select 'leaving handler';
end;
select 'do something';
insert into table_26503 values (v);
select 'do something again';
insert into table_26503 values (v);
end|
create procedure proc_26503_ok_3(v int)
begin
declare i int default 5;
retry:
begin
declare continue handler for sqlexception
begin
select 'caught something';
retry:
while i > 0 do
begin
set i = i - 1;
select 'looping', i;
iterate retry;
select 'dead code';
end;
end while retry;
select 'leaving handler';
end;
select 'do something';
insert into table_26503 values (v);
select 'do something again';
insert into table_26503 values (v);
end;
end|
create procedure proc_26503_ok_4(v int)
begin
declare i int default 5;
retry:
begin
declare continue handler for sqlexception
begin
select 'caught something';
retry:
while i > 0 do
begin
set i = i - 1;
select 'looping', i;
leave retry;
select 'dead code';
end;
end while;
select 'leaving handler';
end;
select 'do something';
insert into table_26503 values (v);
select 'do something again';
insert into table_26503 values (v);
end;
end|
call proc_26503_ok_1(1)|
do something
do something
do something again
do something again
caught something
caught something
looping	i
looping	4
looping	i
looping	3
looping	i
looping	2
looping	i
looping	1
looping	i
looping	0
leaving handler
leaving handler
call proc_26503_ok_2(2)|
do something
do something
do something again
do something again
caught something
caught something
looping	i
looping	4
leaving handler
leaving handler
call proc_26503_ok_3(3)|
do something
do something
do something again
do something again
caught something
caught something
looping	i
looping	4
looping	i
looping	3
looping	i
looping	2
looping	i
looping	1
looping	i
looping	0
leaving handler
leaving handler
call proc_26503_ok_4(4)|
do something
do something
do something again
do something again
caught something
caught something
looping	i
looping	4
leaving handler
leaving handler
drop table table_26503|
drop procedure proc_26503_ok_1|
drop procedure proc_26503_ok_2|
drop procedure proc_26503_ok_3|
drop procedure proc_26503_ok_4|
DROP FUNCTION IF EXISTS bug25373|
CREATE FUNCTION bug25373(p1 INTEGER) RETURNS INTEGER
LANGUAGE SQL DETERMINISTIC
RETURN p1;|
CREATE TABLE t3 (f1 INT, f2 FLOAT)|
INSERT INTO t3 VALUES (1, 3.4), (1, 2), (1, 0.9), (2, 8), (2, 7)|
SELECT SUM(f2), bug25373(f1) FROM t3 GROUP BY bug25373(f1) WITH ROLLUP|
SUM(f2)	bug25373(f1)
6.300000071525574	1
15	2
21.300000071525574	NULL
DROP FUNCTION bug25373|
DROP TABLE t3|
DROP DATABASE IF EXISTS mysqltest1|
DROP DATABASE IF EXISTS mysqltest2|
CREATE DATABASE mysqltest1|
CREATE DATABASE mysqltest2|
CREATE PROCEDURE mysqltest1.p1()
DROP DATABASE mysqltest2|
use mysqltest2|
CALL mysqltest1.p1()|
Warnings:
Note	1049	Unknown database 'mysqltest2'
SELECT DATABASE()|
DATABASE()
NULL
DROP DATABASE mysqltest1|
use test|
drop function if exists bug20777|
drop table if exists examplebug20777|
create function bug20777(f1 bigint unsigned) returns bigint unsigned
begin
set f1 = (f1 - 10); set f1 = (f1 + 10);
return f1;
end|
select bug20777(9223372036854775803) as '9223372036854775803   2**63-5';
9223372036854775803   2**63-5
9223372036854775803
select bug20777(9223372036854775804) as '9223372036854775804   2**63-4';
9223372036854775804   2**63-4
9223372036854775804
select bug20777(9223372036854775805) as '9223372036854775805   2**63-3';
9223372036854775805   2**63-3
9223372036854775805
select bug20777(9223372036854775806) as '9223372036854775806   2**63-2';
9223372036854775806   2**63-2
9223372036854775806
select bug20777(9223372036854775807) as '9223372036854775807   2**63-1';
9223372036854775807   2**63-1
9223372036854775807
select bug20777(9223372036854775808) as '9223372036854775808   2**63+0';
9223372036854775808   2**63+0
9223372036854775808
select bug20777(9223372036854775809) as '9223372036854775809   2**63+1';
9223372036854775809   2**63+1
9223372036854775809
select bug20777(9223372036854775810) as '9223372036854775810   2**63+2';
9223372036854775810   2**63+2
9223372036854775810
select bug20777(-9223372036854775808) as 'lower bounds signed bigint';
ERROR 22003: BIGINT UNSIGNED value is out of range in '(f1@0 - 10)'
select bug20777(9223372036854775807) as 'upper bounds signed bigint';
upper bounds signed bigint
9223372036854775807
select bug20777(0) as 'lower bounds unsigned bigint';
ERROR 22003: BIGINT UNSIGNED value is out of range in '(f1@0 - 10)'
select bug20777(18446744073709551615) as 'upper bounds unsigned bigint';
upper bounds unsigned bigint
18446744073709551615
select bug20777(18446744073709551616) as 'upper bounds unsigned bigint + 1';
upper bounds unsigned bigint + 1
18446744073709551615
Warnings:
Warning	1264	Out of range value for column 'f1' at row 1
select bug20777(-1) as 'lower bounds unsigned bigint - 1';
ERROR 22003: BIGINT UNSIGNED value is out of range in '(f1@0 - 10)'
create table examplebug20777 as select 
0 as 'i',
bug20777(9223372036854775806) as '2**63-2',
bug20777(9223372036854775807) as '2**63-1',
bug20777(9223372036854775808) as '2**63',
bug20777(9223372036854775809) as '2**63+1',
bug20777(18446744073709551614) as '2**64-2',
bug20777(18446744073709551615) as '2**64-1', 
bug20777(18446744073709551616) as '2**64';
Warnings:
Warning	1264	Out of range value for column 'f1' at row 1
insert into examplebug20777 values (1, 9223372036854775806, 9223372036854775807, 223372036854775808, 9223372036854775809, 18446744073709551614, 18446744073709551615, 8446744073709551616);
show create table examplebug20777;
Table	Create Table
examplebug20777	CREATE TABLE `examplebug20777` (
  `i` int(1) NOT NULL DEFAULT '0',
  `2**63-2` bigint(20) unsigned DEFAULT NULL,
  `2**63-1` bigint(20) unsigned DEFAULT NULL,
  `2**63` bigint(20) unsigned DEFAULT NULL,
  `2**63+1` bigint(20) unsigned DEFAULT NULL,
  `2**64-2` bigint(20) unsigned DEFAULT NULL,
  `2**64-1` bigint(20) unsigned DEFAULT NULL,
  `2**64` bigint(20) unsigned DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
select * from examplebug20777 order by i;
i	2**63-2	2**63-1	2**63	2**63+1	2**64-2	2**64-1	2**64
0	9223372036854775806	9223372036854775807	9223372036854775808	9223372036854775809	18446744073709551614	18446744073709551615	18446744073709551615
1	9223372036854775806	9223372036854775807	223372036854775808	9223372036854775809	18446744073709551614	18446744073709551615	8446744073709551616
drop table examplebug20777;
select bug20777(18446744073709551613)+1;
bug20777(18446744073709551613)+1
18446744073709551614
drop function bug20777;
DROP FUNCTION IF EXISTS bug5274_f1|
DROP FUNCTION IF EXISTS bug5274_f2|
CREATE FUNCTION bug5274_f1(p1 CHAR) RETURNS CHAR
RETURN CONCAT(p1, p1)|
CREATE FUNCTION bug5274_f2() RETURNS CHAR
BEGIN
DECLARE v1 INT DEFAULT 0;
DECLARE v2 CHAR DEFAULT 'x';
WHILE v1 < 30 DO
SET v1 = v1 + 1;
SET v2 = bug5274_f1(v2);
END WHILE;
RETURN v2;
END|
SELECT bug5274_f2()|
bug5274_f2()
x
DROP FUNCTION bug5274_f1|
DROP FUNCTION bug5274_f2|
drop procedure if exists proc_21513|
create procedure proc_21513()`my_label`:BEGIN END|
show create procedure proc_21513|
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
proc_21513		CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_21513`()
`my_label`:BEGIN END	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
drop procedure proc_21513|
End of 5.0 tests.
drop table t1,t2;
CREATE TABLE t1 (a int auto_increment primary key) engine=MyISAM;
CREATE TABLE t2 (a int auto_increment primary key, b int) engine=innodb;
set @a=0;
CREATE function bug27354() RETURNS int not deterministic
begin
insert into t1 values (null);
set @a=@a+1;
return @a;
end|
update t2 set b=1 where a=bug27354();
select count(t_1.a),count(t_2.a) from t1 as t_1, t2 as t_2 /* must be 0,0 */;
count(t_1.a)	count(t_2.a)
0	0
insert into t2 values (1,1),(2,2),(3,3);
update t2 set b=-b where a=bug27354();
select * from t2 /* must return 1,-1 ... */;
a	b
1	-1
2	-2
3	-3
select count(*) from t1 /* must be 3 */;
count(*)
3
drop table t1,t2;
drop function   bug27354;
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2);
CREATE FUNCTION metered(a INT) RETURNS INT RETURN 12;
CREATE VIEW v1 AS SELECT test.metered(a) as metered FROM t1;
SHOW CREATE VIEW v1;
View	Create View	character_set_client	collation_connection
v1	CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select `test`.`metered`(`t1`.`a`) AS `metered` from `t1`	utf8mb4	utf8mb4_0900_ai_ci
DROP VIEW v1;
DROP FUNCTION metered;
DROP TABLE t1;
SET @p1_p2_cnt= 2;
CREATE TABLE t1 (c1 INT);
CREATE VIEW v1 AS SELECT * FROM t1;
PREPARE s1 FROM 'SELECT c1 FROM v1';
EXECUTE s1;
c1
EXECUTE s1;
c1
CREATE PROCEDURE p1(IN loops BIGINT(19) UNSIGNED)
BEGIN
WHILE loops > 0 DO
SELECT c1 FROM v1;
SET loops = loops - 1;
END WHILE;
END|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
CREATE PROCEDURE p2(IN loops BIGINT(19) UNSIGNED)
BEGIN
WHILE loops > 0 DO
SELECT c1 FROM v1;
CALL p1(@p1_p2_cnt);
SET loops = loops - 1;
END WHILE;
END|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
CREATE FUNCTION f1(loops INT UNSIGNED)
RETURNS INT
BEGIN
DECLARE tmp INT;
WHILE loops > 0 DO
SELECT c1 INTO tmp FROM v1;
SET loops = loops - 1;
END WHILE;
RETURN loops;
END|
CALL p1(2);
c1
c1
CALL p2(2);
c1
c1
c1
c1
c1
c1
SELECT f1(2);
f1(2)
0
PREPARE s1 FROM 'SELECT f1(2)';
EXECUTE s1;
f1(2)
0
EXECUTE s1;
f1(2)
0
DROP PROCEDURE p1;
DROP PROCEDURE p2;
DROP FUNCTION f1;
DROP VIEW v1;
DROP TABLE t1;
create database mysqltest_db1;
create procedure mysqltest_db1.sp_bug28551() begin end;
call mysqltest_db1.sp_bug28551();
show warnings;
Level	Code	Message
drop database mysqltest_db1;
drop database if exists mysqltest_db1;
drop table if exists test.t1;
create database mysqltest_db1;
use mysqltest_db1;
drop database mysqltest_db1;
create table test.t1 (id int);
insert into test.t1 (id) values (1);
create procedure test.sp_bug29050() begin select * from t1; end//
show warnings;
Level	Code	Message
call test.sp_bug29050();
id
1
show warnings;
Level	Code	Message
use test;
drop procedure sp_bug29050;
drop table t1;
SET NAMES latin1;
CREATE PROCEDURE p1()
BEGIN
DECLARE бвд INT;
SELECT бвд;
END|
CALL p1();
бвд
NULL
SET NAMES default;
DROP PROCEDURE p1;
drop procedure if exists proc_25411_a;
drop procedure if exists proc_25411_b;
drop procedure if exists proc_25411_c;
create procedure proc_25411_a()
begin
/* real comment */
select 1;
/*! select 2; */
select 3;
/*!00000 select 4; */
/*!99999 select 5; */
end
$$
create procedure proc_25411_b(
/* real comment */
/*! p1 int, */
/*!00000 p2 int */
/*!99999 ,p3 int */
)
begin
select p1, p2;
end
$$
create procedure proc_25411_c()
begin
select 1/*!,2*//*!00000,3*//*!99999,4*/;
select 1/*! ,2*//*!00000 ,3*//*!99999 ,4*/;
select 1/*!,2 *//*!00000,3 *//*!99999,4 */;
select 1/*! ,2 *//*!00000 ,3 *//*!99999 ,4 */;
select 1 /*!,2*/ /*!00000,3*/ /*!99999,4*/ ;
end
$$
show create procedure proc_25411_a;
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
proc_25411_a		CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_25411_a`()
begin
/* real comment */
select 1;
 select 2; 
select 3;
 select 4; 

end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call proc_25411_a();
1
1
2
2
3
3
4
4
show create procedure proc_25411_b;
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
proc_25411_b		CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_25411_b`(
/* real comment */
 p1 int, 
 p2 int 

)
begin
select p1, p2;
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
select routine_name, routine_definition from information_schema.routines where routine_name like '%25411%';
ROUTINE_NAME	ROUTINE_DEFINITION
proc_25411_a	begin
/* real comment */
select 1;
 select 2; 
select 3;
 select 4; 

end
proc_25411_b	begin
select p1, p2;
end
proc_25411_c	begin
select 1,2 ,3 ;
select 1 ,2  ,3 ;
select 1,2 ,3 ;
select 1 ,2  ,3 ;
select 1 ,2 ,3  ;
end
select parameter_name from information_schema.parameters where SPECIFIC_NAME= '%25411%';
PARAMETER_NAME
call proc_25411_b(10, 20);
p1	p2
10	20
show create procedure proc_25411_c;
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
proc_25411_c		CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_25411_c`()
begin
select 1,2 ,3 ;
select 1 ,2  ,3 ;
select 1,2 ,3 ;
select 1 ,2  ,3 ;
select 1 ,2 ,3  ;
end	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
call proc_25411_c();
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
1	2	3
drop procedure proc_25411_a;
drop procedure proc_25411_b;
drop procedure proc_25411_c;
drop procedure if exists proc_26302;
create procedure proc_26302()
select 1 /* testing */;
show create procedure proc_26302;
Procedure	sql_mode	Create Procedure	character_set_client	collation_connection	Database Collation
proc_26302		CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_26302`()
select 1 /* testing */	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
select ROUTINE_NAME, ROUTINE_DEFINITION from information_schema.ROUTINES
where ROUTINE_NAME = "proc_26302";
ROUTINE_NAME	ROUTINE_DEFINITION
proc_26302	select 1 /* testing */
drop procedure proc_26302;
CREATE FUNCTION f1() RETURNS INT DETERMINISTIC RETURN 2;
CREATE FUNCTION f2(I INT) RETURNS INT DETERMINISTIC RETURN 3;
CREATE TABLE t1 (c1 INT, INDEX(c1));
INSERT INTO t1 VALUES (1), (2), (3), (4), (5);
CREATE VIEW v1 AS SELECT c1 FROM t1;
analyze table t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	OK
EXPLAIN SELECT * FROM t1 WHERE c1=1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	c1	c1	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = 1)
EXPLAIN SELECT * FROM t1 WHERE c1=f1();
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	c1	c1	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = `f1`())
EXPLAIN SELECT * FROM v1 WHERE c1=1;
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	c1	c1	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = 1)
EXPLAIN SELECT * FROM v1 WHERE c1=f1();
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	c1	c1	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = `f1`())
EXPLAIN SELECT * FROM t1 WHERE c1=f2(10);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	ref	c1	c1	5	const	1	100.00	Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = `f2`(10))
EXPLAIN SELECT * FROM t1 WHERE c1=f2(c1);
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	NULL	c1	5	NULL	5	20.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = `f2`(`test`.`t1`.`c1`))
EXPLAIN SELECT * FROM t1 WHERE c1=f2(rand());
id	select_type	table	partitions	type	possible_keys	key	key_len	ref	rows	filtered	Extra
1	SIMPLE	t1	NULL	index	NULL	c1	5	NULL	5	20.00	Using where; Using index
Warnings:
Note	1003	/* select#1 */ select `test`.`t1`.`c1` AS `c1` from `test`.`t1` where (`test`.`t1`.`c1` = `f2`(rand()))
DROP VIEW v1;
DROP FUNCTION f1;
DROP FUNCTION f2;
DROP TABLE t1;
create function f1()
returns int(11)
not deterministic
contains sql
sql security definer
comment ''
begin
declare x int(11);
set x=-1;
return x;
end|
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.
create view v1 as select 1 as one, f1() as days;
show create view test.v1;
View	Create View	character_set_client	collation_connection
v1	CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `test`.`v1` AS select 1 AS `one`,`f1`() AS `days`	utf8mb4	utf8mb4_0900_ai_ci
select column_name from information_schema.columns
where table_name='v1' and table_schema='test' order by column_name;
COLUMN_NAME
days
one
drop view v1;
drop function f1;

# Bug#13675.

DROP PROCEDURE IF EXISTS p1;
DROP PROCEDURE IF EXISTS p2;
DROP TABLE IF EXISTS t1;

CREATE PROCEDURE p1(v DATETIME) CREATE TABLE t1 SELECT v;
CREATE PROCEDURE p2(v INT) CREATE TABLE t1 SELECT v;

CALL p1(NOW());
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `v` datetime DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci

DROP TABLE t1;

CALL p1('text');
Warnings:
Warning	1265	Data truncated for column 'v' at row 1
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `v` datetime DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci

DROP TABLE t1;

CALL p2(10);
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `v` bigint(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci

DROP TABLE t1;

CALL p2('text');
Warnings:
Warning	1366	Incorrect integer value: 'text' for column 'v' at row 1
SHOW CREATE TABLE t1;
Table	Create Table
t1	CREATE TABLE `t1` (
  `v` bigint(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci

DROP TABLE t1;

DROP PROCEDURE p1;
DROP PROCEDURE p2;

#
# Bug#31035.
#

#
# - Prepare.
#

DROP TABLE IF EXISTS t1;
DROP FUNCTION IF EXISTS f1;
DROP FUNCTION IF EXISTS f2;
DROP FUNCTION IF EXISTS f3;
DROP FUNCTION IF EXISTS f4;

#
# - Create required objects.
#

CREATE TABLE t1(c1 INT);

INSERT INTO t1 VALUES (1), (2), (3);

CREATE FUNCTION f1()
RETURNS INT
NOT DETERMINISTIC
RETURN 1;

CREATE FUNCTION f2(p INT)
RETURNS INT
NOT DETERMINISTIC
RETURN 1;

CREATE FUNCTION f3()
RETURNS INT
DETERMINISTIC
RETURN 1;

CREATE FUNCTION f4(p INT)
RETURNS INT
DETERMINISTIC
RETURN 1;

#
# - Check.
#

SELECT f1() AS a FROM t1 GROUP BY a;
a
1

SELECT f2(@a) AS a FROM t1 GROUP BY a;
a
1

SELECT f3() AS a FROM t1 GROUP BY a;
a
1

SELECT f4(0) AS a FROM t1 GROUP BY a;
a
1

SELECT f4(@a) AS a FROM t1 GROUP BY a;
a
1

#
# - Cleanup.
#

DROP TABLE t1;
DROP FUNCTION f1;
DROP FUNCTION f2;
DROP FUNCTION f3;
DROP FUNCTION f4;

#
# Bug#31191.
#

#
# - Prepare.
#

DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
DROP FUNCTION IF EXISTS f1;

#
# - Create required objects.
#

CREATE TABLE t1 (
id INT(10) UNSIGNED NOT NULL AUTO_INCREMENT,
barcode INT(8) UNSIGNED ZEROFILL nOT NULL,
PRIMARY KEY  (id),
UNIQUE KEY barcode (barcode)
);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	The ZEROFILL attribute is deprecated and will be removed in a future release. Use the LPAD function to zero-pad numbers, or store the formatted numbers in a CHAR column.
Warning	1681	Integer display width is deprecated and will be removed in a future release.

INSERT INTO t1 (id, barcode) VALUES (1, 12345678);
INSERT INTO t1 (id, barcode) VALUES (2, 12345679);

CREATE TABLE test.t2 (
id INT(10) UNSIGNED NOT NULL AUTO_INCREMENT,
barcode BIGINT(11) UNSIGNED ZEROFILL NOT NULL,
PRIMARY KEY  (id)
);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	The ZEROFILL attribute is deprecated and will be removed in a future release. Use the LPAD function to zero-pad numbers, or store the formatted numbers in a CHAR column.
Warning	1681	Integer display width is deprecated and will be removed in a future release.

INSERT INTO test.t2 (id, barcode) VALUES (1, 12345106708);
INSERT INTO test.t2 (id, barcode) VALUES (2, 12345106709);

CREATE FUNCTION f1(p INT(8))
RETURNS BIGINT(11) UNSIGNED
READS SQL DATA
RETURN FLOOR(p/1000)*1000000 + 100000 + FLOOR((p MOD 1000)/10)*100 + (p MOD 10);
Warnings:
Warning	1681	Integer display width is deprecated and will be removed in a future release.
Warning	1681	Integer display width is deprecated and will be removed in a future release.

#
# - Check.
#

SELECT DISTINCT t1.barcode, f1(t1.barcode)
FROM t1
INNER JOIN t2
ON f1(t1.barcode) = t2.barcode
WHERE t1.barcode=12345678;
barcode	f1(t1.barcode)
12345678	12345106708

#
# - Cleanup.
#

DROP TABLE t1;
DROP TABLE t2;
DROP FUNCTION f1;

#
# Bug#31226.
#

#
# - Prepare.
#

DROP TABLE IF EXISTS t1;
DROP FUNCTION IF EXISTS f1;

#
# - Create required objects.
#

CREATE TABLE t1(id INT);

INSERT INTO t1 VALUES (1), (2), (3);

CREATE FUNCTION f1()
RETURNS DATETIME
NOT DETERMINISTIC NO SQL
RETURN NOW();

#
# - Check.
#

SELECT f1() FROM t1 GROUP BY 1;
f1()
<timestamp>

#
# - Cleanup.
#

DROP TABLE t1;
DROP FUNCTION f1;

DROP PROCEDURE IF EXISTS db28318_a.t1;
DROP PROCEDURE IF EXISTS db28318_b.t2;
DROP DATABASE IF EXISTS db28318_a;
DROP DATABASE IF EXISTS db28318_b;
CREATE DATABASE db28318_a;
CREATE DATABASE db28318_b;
CREATE PROCEDURE db28318_a.t1() SELECT "db28318_a.t1";
CREATE PROCEDURE db28318_b.t2() CALL t1();
use db28318_a;
CALL db28318_b.t2();
ERROR 42000: PROCEDURE db28318_b.t1 does not exist
DROP PROCEDURE db28318_a.t1;
DROP PROCEDURE db28318_b.t2;
DROP DATABASE db28318_a;
DROP DATABASE db28318_b;
use test;
DROP TABLE IF EXISTS t1;
DROP PROCEDURE IF EXISTS bug29770;
CREATE TABLE t1(a int);
CREATE PROCEDURE bug29770()
BEGIN
DECLARE CONTINUE HANDLER FOR SQLSTATE '42S22' SET @state:= 'run';
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION SET @exception:= 'run';
SELECT x FROM t1;
END|
CALL bug29770();
SELECT @state, @exception;
@state	@exception
run	NULL
DROP TABLE t1;
DROP PROCEDURE bug29770;
use test;
drop table if exists t_33618;
drop procedure if exists proc_33618;
create table t_33618 (`a` int, unique(`a`), `b` varchar(30)) engine=myisam;
insert into t_33618 (`a`,`b`) values (1,'1'),(2,'2');
create procedure proc_33618(num int)
begin
declare count1 int default '0';
declare vb varchar(30);
declare last_row int;
while(num>=1) do
set num=num-1;
begin
declare cur1 cursor for select `a` from t_33618;
declare continue handler for not found set last_row = 1;
set last_row:=0;
open cur1;
rep1:
repeat
begin
declare exit handler for 1062 begin end;
fetch cur1 into vb;
if (last_row = 1) then
leave rep1;
end if;
end;
until last_row=1
end repeat;
close cur1;
end;
end while;
end//
call proc_33618(20);
drop table t_33618;
drop procedure proc_33618;
#
# Bug#30787: Stored function ignores user defined alias.
#
use test;
drop function if exists func30787;
create table t1(f1 int);
insert into t1 values(1),(2);
create function func30787(p1 int) returns int
begin
return p1;
end |
select (select func30787(f1)) as ttt from t1;
ttt
1
2
drop function func30787;
drop table t1;
CREATE TABLE t1 (id INT);
INSERT INTO t1 VALUES (1),(2),(3),(4);
CREATE PROCEDURE test_sp()
SELECT t1.* FROM t1 RIGHT JOIN t1 t2 ON t1.id=t2.id;
CALL test_sp();
id
1
2
3
4
CALL test_sp();
id
1
2
3
4
DROP PROCEDURE test_sp;
DROP TABLE t1;
create table t1(c1 INT);
create function f1(p1 int) returns varchar(32)
return 'aaa';
create view v1 as select f1(c1) as parent_control_name from t1;
create procedure p1()
begin
select parent_control_name as c1 from v1;
end //
call p1();
c1
call p1();
c1
drop procedure p1;
drop function f1;
drop view v1;
drop table t1;
drop procedure if exists `p2` $
create procedure `p2`(in `a` text charset utf8)
begin
declare `pos` int default 1;
declare `str` text charset utf8;
set `str` := `a`;
select substr(`str`, `pos`+ 1 ) into `str`;
end $
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
call `p2`('s s s s s s');
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
drop procedure `p2`;
drop table if exists t1;
drop procedure if exists p1;
create procedure p1() begin select * from t1; end$
call p1$
ERROR 42S02: Table 'test.t1' doesn't exist
create table t1 (a integer)$
call p1$
a
alter table t1 add b integer;
call p1$
a	b
drop table t1;
drop procedure p1;
# ------------------------------------------------------------------
# -- End of 5.0 tests
# ------------------------------------------------------------------

#
# Bug#20550.
#

#
# - Prepare.
#

DROP VIEW IF EXISTS v1;
DROP VIEW IF EXISTS v2;
DROP FUNCTION IF EXISTS f1;
DROP FUNCTION IF EXISTS f2;

#
# - Create required objects.
#

CREATE FUNCTION f1() RETURNS VARCHAR(65525) RETURN 'Hello';
Warnings:
Note	1246	Converting column '' from VARCHAR to TEXT

CREATE FUNCTION f2() RETURNS TINYINT RETURN 1;

CREATE VIEW v1 AS SELECT f1();

CREATE VIEW v2 AS SELECT f2();

#
# - Check.
#

SELECT DATA_TYPE FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'v1';
DATA_TYPE
mediumtext

SELECT DATA_TYPE FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'v2';
DATA_TYPE
tinyint

#
# - Cleanup.
#

DROP FUNCTION f1;
DROP FUNCTION f2;
DROP VIEW v1;
DROP VIEW v2;

#
# - Bug#24923: prepare.
#

DROP FUNCTION IF EXISTS f1;

#
# - Bug#24923: create required objects.
#

CREATE FUNCTION f1(p INT)
RETURNS ENUM ('Very_long_enum_element_identifier',
'Another_very_long_enum_element_identifier')
BEGIN
CASE p
WHEN 1 THEN
RETURN 'Very_long_enum_element_identifier';
ELSE
RETURN 'Another_very_long_enum_element_identifier';
END CASE;
END|

#
# - Bug#24923: check.
#

SELECT f1(1);
f1(1)
Very_long_enum_element_identifier

SELECT f1(2);
f1(2)
Another_very_long_enum_element_identifier

SHOW CREATE FUNCTION f1;
Function	sql_mode	Create Function	character_set_client	collation_connection	Database Collation
f1		CREATE DEFINER=`root`@`localhost` FUNCTION `f1`(p INT) RETURNS enum('Very_long_enum_element_identifier','Another_very_long_enum_element_identifier') CHARSET utf8mb4
BEGIN
CASE p
WHEN 1 THEN
RETURN 'Very_long_enum_element_identifier';
ELSE
RETURN 'Another_very_long_enum_element_identifier';
END CASE;
END	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
#
# - Bug#24923: cleanup.
#

DROP FUNCTION f1;

drop procedure if exists p;
set @old_mode= @@sql_mode;
set @@sql_mode= cast(pow(2,33)-1 as unsigned integer) & ~0x1003ff00;
Warnings:
Warning	3090	Changing sql mode 'PAD_CHAR_TO_FULL_LENGTH' is deprecated. It will be removed in a future release.
select @@sql_mode into @full_mode;
create procedure p() begin end;
call p();
set @@sql_mode= @old_mode;
select routine_name from information_schema.routines where routine_name = 'p' and sql_mode = @full_mode;
ROUTINE_NAME
p
drop procedure p;
CREATE DEFINER = 'root'@'localhost' PROCEDURE p1()
NOT DETERMINISTIC
CONTAINS SQL
SQL SECURITY DEFINER
COMMENT ''
BEGIN
SHOW TABLE STATUS like 't1';
END;//
CREATE TABLE t1 (f1 INT);
CALL p1();
CALL p1();
CALL p1();
CALL p1();
DROP PROCEDURE p1;
DROP TABLE t1;
CREATE TABLE t1 ( f1 integer, primary key (f1));
CREATE TABLE t2 LIKE t1;
CREATE TEMPORARY TABLE t3 LIKE t1;
CREATE PROCEDURE p1 () BEGIN SELECT f1 FROM t3 AS A WHERE A.f1 IN ( SELECT f1 FROM t3 ) ;
END|
CALL p1;
ERROR HY000: Can't reopen table: 'A'
CREATE VIEW t3 AS SELECT f1 FROM t2 A WHERE A.f1 IN ( SELECT f1 FROM t2 );
DROP TABLE t3;
CALL p1;
f1
CALL p1;
f1
DROP PROCEDURE p1;
DROP TABLE t1, t2;
DROP VIEW t3;
#
# Bug #46629: Item_in_subselect::val_int(): Assertion `0' 
# on subquery inside a SP
#
CREATE TABLE t1(a INT);
CREATE TABLE t2(a INT, b INT PRIMARY KEY);
CREATE PROCEDURE p1 () 
BEGIN 
SELECT a FROM t1 A WHERE A.b IN (SELECT b FROM t2 AS B);
END|
CALL p1;
ERROR 42S22: Unknown column 'A.b' in 'IN/ALL/ANY subquery'
CALL p1;
ERROR 42S22: Unknown column 'A.b' in 'IN/ALL/ANY subquery'
DROP PROCEDURE p1;
DROP TABLE t1, t2;
#
# Bug#47627: SET @@{global.session}.local_variable in stored routine causes crash
# Bug#48626: Crash or lost connection using SET for declared variables with @@
#
DROP PROCEDURE IF EXISTS p1;
DROP PROCEDURE IF EXISTS p2;
DROP PROCEDURE IF EXISTS p3;
CREATE PROCEDURE p1()
BEGIN
DECLARE v INT DEFAULT 0;
SET @@SESSION.v= 10;
END//
ERROR HY000: Unknown system variable 'v'
CREATE PROCEDURE p2()
BEGIN
DECLARE v INT DEFAULT 0;
SET v= 10;
END//
call p2()//
CREATE PROCEDURE p3()
BEGIN
DECLARE v INT DEFAULT 0;
SELECT @@SESSION.v;
END//
ERROR HY000: Unknown system variable 'v'
CREATE PROCEDURE p4()
BEGIN
DECLARE v INT DEFAULT 0;
SET @@GLOBAL.v= 10;
END//
ERROR HY000: Unknown system variable 'v'
CREATE PROCEDURE p5()
BEGIN
DECLARE init_connect INT DEFAULT 0;
SET init_connect= 10;
SET @@GLOBAL.init_connect= 'SELECT 1';
SET @@SESSION.IDENTITY= 1;
SELECT @@SESSION.IDENTITY;
SELECT @@GLOBAL.init_connect;
SELECT init_connect;
END//
CREATE PROCEDURE p6()
BEGIN
DECLARE v INT DEFAULT 0;
SET @@v= 0;
END//
ERROR HY000: Unknown system variable 'v'
SET @old_init_connect= @@GLOBAL.init_connect;
CALL p5();
@@SESSION.IDENTITY
1
@@GLOBAL.init_connect
SELECT 1
init_connect
10
SET @@GLOBAL.init_connect= @old_init_connect;
DROP PROCEDURE p2;
DROP PROCEDURE p5;
#
# Bug#11840395 (formerly known as bug#60347):
# The string "versiondata" seems
# to be 'leaking' into the schema name space
#
CREATE DATABASE mixedCaseDbName;
CREATE PROCEDURE mixedCaseDbName.tryMyProc() begin end|
CREATE FUNCTION mixedCaseDbName.tryMyFunc() returns text begin return 'IT WORKS'; end
|
call mixedCaseDbName.tryMyProc();
select mixedCaseDbName.tryMyFunc();
mixedCaseDbName.tryMyFunc()
IT WORKS
DROP DATABASE mixedCaseDbName;
#
# Bug#11766594  59736: SELECT DISTINCT.. INCORRECT RESULT WITH DETERMINISTIC FUNCTION IN WHERE C
#
CREATE TABLE t1 (a INT, b INT, KEY(b));
CREATE TABLE t2 (c INT, d INT, KEY(c));
INSERT INTO t1 VALUES (1,1),(1,1),(1,2);
INSERT INTO t2 VALUES (1,1),(1,2);
CREATE FUNCTION f1() RETURNS INT DETERMINISTIC
BEGIN
DECLARE a int;
-- SQL statement inside
SELECT 1 INTO a;
RETURN a;
END $
SELECT COUNT(DISTINCT d) FROM t1, t2  WHERE a = c AND b = f1();
COUNT(DISTINCT d)
2
DROP FUNCTION f1;
DROP TABLE t1, t2;
# ------------------------------------------------------------------
# -- End of 5.1 tests
# ------------------------------------------------------------------
DROP FUNCTION IF EXISTS f1;
DROP TABLE IF EXISTS t_non_existing;
DROP TABLE IF EXISTS t1;
CREATE FUNCTION f1() RETURNS INT
BEGIN
DECLARE v INT;
SELECT a INTO v FROM t_non_existing;
RETURN 1;
END|
CREATE TABLE t1 (a INT) ENGINE = myisam;
INSERT INTO t1 VALUES (1);
SELECT * FROM t1 WHERE a = f1();
ERROR 42S02: Table 'test.t_non_existing' doesn't exist
DROP FUNCTION f1;
DROP TABLE t1;
DROP PROCEDURE IF EXISTS p1;
CREATE PROCEDURE p1(a INT, b CHAR)
BEGIN
IF a > 0 THEN
CALL p1(a-1, 'ab');
ELSE
SELECT 1;
END IF;
END|
SET @save_max_sp_recursion= @@max_sp_recursion_depth;
SET @@max_sp_recursion_depth= 5;
CALL p1(4, 'a');
1
1
Warnings:
Warning	1265	Data truncated for column 'b' at row 1
Warning	1265	Data truncated for column 'b' at row 1
Warning	1265	Data truncated for column 'b' at row 1
Warning	1265	Data truncated for column 'b' at row 1
SET @@max_sp_recursion_depth= @save_max_sp_recursion;
DROP PROCEDURE p1;
DROP PROCEDURE IF EXISTS p1;
CREATE PROCEDURE p1(a CHAR)
BEGIN
SELECT 1;
SELECT CAST('10 ' as UNSIGNED INTEGER);
END|
CALL p1('data truncated parameter');
1
1
CAST('10 ' as UNSIGNED INTEGER)
10
Warnings:
Warning	1265	Data truncated for column 'a' at row 1
Warning	1292	Truncated incorrect INTEGER value: '10 '
DROP PROCEDURE p1;
DROP PROCEDURE IF EXISTS p1;
DROP PROCEDURE IF EXISTS p2;
DROP PROCEDURE IF EXISTS p3;
DROP PROCEDURE IF EXISTS p4;
CREATE PROCEDURE p1()
CALL p2()|
CREATE PROCEDURE p2()
CALL p3()|
CREATE PROCEDURE p3()
CALL p4()|
CREATE PROCEDURE p4()
BEGIN
SELECT 1;
SELECT CAST('10 ' as UNSIGNED INTEGER);
END|
CALL p1();
1
1
CAST('10 ' as UNSIGNED INTEGER)
10
Warnings:
Warning	1292	Truncated incorrect INTEGER value: '10 '
DROP PROCEDURE p1;
DROP PROCEDURE p2;
DROP PROCEDURE p3;
DROP PROCEDURE p4;
DROP FUNCTION IF EXISTS f1;
DROP FUNCTION IF EXISTS f2;
DROP FUNCTION IF EXISTS f3;
DROP FUNCTION IF EXISTS f4;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (a CHAR(2));
INSERT INTO t1 VALUES ('aa');
CREATE FUNCTION f1() RETURNS CHAR
RETURN (SELECT f2())|
CREATE FUNCTION f2() RETURNS CHAR
RETURN (SELECT f3())|
CREATE FUNCTION f3() RETURNS CHAR
RETURN (SELECT f4())|
CREATE FUNCTION f4() RETURNS CHAR
BEGIN
RETURN (SELECT a FROM t1);
END|
SELECT f1();
f1()
a
Warnings:
Warning	1265	Data truncated for column 'f4()' at row 2
DROP FUNCTION f1;
DROP FUNCTION f2;
DROP FUNCTION f3;
DROP FUNCTION f4;
DROP TABLE t1;
#
# Bug#34197: CREATE PROCEDURE fails when COMMENT truncated in non 
#            strict SQL mode
#
DROP PROCEDURE IF EXISTS p1;
CREATE PROCEDURE p1 ()
COMMENT
'12345678901234567890123456789012345678901234567890123456789012345678901234567890'
BEGIN
END;
SELECT routine_comment FROM information_schema.routines WHERE routine_name = "p1";
ROUTINE_COMMENT
12345678901234567890123456789012345678901234567890123456789012345678901234567890
DROP PROCEDURE p1;
#
# Bug #47313 assert in check_key_in_view during CALL procedure
#
DROP TABLE IF EXISTS t1;
DROP VIEW IF EXISTS t1, t2_unrelated;
DROP PROCEDURE IF EXISTS p1;
CREATE PROCEDURE p1(IN x INT) INSERT INTO t1 VALUES (x);
CREATE VIEW t1 AS SELECT 10 AS f1;
# t1 refers to the view
CALL p1(1);
ERROR HY000: The target table t1 of the INSERT is not insertable-into
CREATE TEMPORARY TABLE t1 (f1 INT);
# Since last call to p1 was unsuccessful, the query will be reparsed
# and the procedure will refer to the temporary table
CALL p1(2);
DROP VIEW t1;
# t1 still refers to the temporary table
CALL p1(3);
# Check which values were inserted into the temp table.
SELECT * FROM t1;
f1
2
3
DROP TEMPORARY TABLE t1;
DROP PROCEDURE p1;
# Now test what happens if the sp cache is invalidated.
CREATE PROCEDURE p1(IN x INT) INSERT INTO t1 VALUES (x);
CREATE VIEW t1 AS SELECT 10 AS f1;
CREATE VIEW v2_unrelated AS SELECT 1 AS r1;
# Load the procedure into the sp cache
CALL p1(4);
ERROR HY000: The target table t1 of the INSERT is not insertable-into
CREATE TEMPORARY TABLE t1 (f1 int);
ALTER VIEW v2_unrelated AS SELECT 2 AS r1;
# Alter view causes the sp cache to be invalidated.
# Now t1 refers to the temporary table, not the view.
CALL p1(5);
# Check which values were inserted into the temp table.
SELECT * FROM t1;
f1
5
DROP TEMPORARY TABLE t1;
DROP VIEW t1, v2_unrelated;
DROP PROCEDURE p1;
CREATE PROCEDURE p1(IN x INT) INSERT INTO t1 VALUES (x);
CREATE TEMPORARY TABLE t1 (f1 INT);
# t1 refers to the temporary table
CALL p1(6);
CREATE VIEW t1 AS SELECT 10 AS f1;
# Create view causes the sp cache to be invalidated.
# t1 still refers to the temporary table since it shadows the view.
CALL p1(7);
DROP VIEW t1;
# Check which values were inserted into the temp table.
SELECT * FROM t1;
f1
6
7
DROP TEMPORARY TABLE t1;
DROP PROCEDURE p1;
#
# Bug #11918 Can't use a declared variable in LIMIT clause
#
drop table if exists t1;
drop procedure if exists p1;
create table t1 (c1 int);
insert into t1 (c1) values (1), (2), (3), (4), (5);
create procedure p1()
begin
declare a integer;
declare b integer;
select * from t1 limit a, b;
end|
# How do we handle NULL limit values?
call p1();
c1
drop table t1;
create table t1 (a int);
insert into t1 (a) values (1), (2), (3), (4), (5);
#
# Do we correctly resolve identifiers in LIMIT?
#
call p1();
a
drop table t1;
create table t1 (c1 int);
insert into t1 (c1) values (1), (2), (3), (4), (5);
drop procedure p1;
# Try to create a procedure that
# refers to non-existing variables.
create procedure p1(p1 integer, p2 integer)
select * from t1 limit a, b;
ERROR 42000: Undeclared variable: a
#
# Try to use data types not allowed in LIMIT 
#
create procedure p1(p1 date, p2 date) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create procedure p1(p1 integer, p2 float) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create procedure p1(p1 integer, p2 char(1)) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create procedure p1(p1 varchar(5), p2 char(1)) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create procedure p1(p1 decimal, p2 decimal) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create procedure p1(p1 double, p2 double) select * from t1 limit p1, p2;
ERROR HY000: A variable of a non-integer based type in LIMIT clause
#
# Finally, test the valid case.
#
create procedure p1(p1 integer, p2 integer)
select * from t1 limit p1, p2;
call p1(NULL, NULL);
c1
call p1(0, 0);
c1
call p1(0, -1);
c1
1
2
3
4
5
call p1(-1, 0);
c1
call p1(-1, -1);
c1
call p1(0, 1);
c1
1
call p1(1, 0);
c1
call p1(1, 5);
c1
2
3
4
5
call p1(3, 2);
c1
4
5
# Try to create a function that
# refers to non-existing variables.
create function f1(p1 integer, p2 integer)
returns int
begin
declare a int;
set a = (select count(*) from t1 limit a, b);
return a;
end|
ERROR 42000: Undeclared variable: b
create function f1()
returns int
begin
declare a, b, c int;
set a = (select count(*) from t1 limit b, c);
return a;
end|
# How do we handle NULL limit values?
select f1();
f1()
NULL
drop function f1;
#
# Try to use data types not allowed in LIMIT 
#
create function f1(p1 date, p2 date)
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create function f1(p1 integer, p2 float)
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create function f1(p1 integer, p2 char(1))
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create function f1(p1 varchar(5), p2 char(1))
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create function f1(p1 decimal, p2 decimal)
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
create function f1(p1 double, p2 double)
returns int
begin
declare a int;
set a = (select count(*) from t1 limit p1, p2);
return a;
end|
ERROR HY000: A variable of a non-integer based type in LIMIT clause
#
# Finally, test the valid case.
#
create function f1(p1 integer, p2 integer)
returns int
begin
declare count int;
set count= (select count(*) from (select * from t1 limit p1, p2) t_1);
return count;
end|
select f1(0, 0);
f1(0, 0)
0
select f1(0, -1);
f1(0, -1)
5
select f1(-1, 0);
f1(-1, 0)
0
select f1(-1, -1);
f1(-1, -1)
0
select f1(0, 1);
f1(0, 1)
1
select f1(1, 0);
f1(1, 0)
0
select f1(1, 5);
f1(1, 5)
4
select f1(3, 2);
f1(3, 2)
2
# Cleanup
drop table t1;
drop procedure p1;
drop function f1;
# 
# BUG#11766234: 59299: ASSERT (TABLE_REF->TABLE || TABLE_REF->VIEW) 
#               FAILS IN SET_FIELD_ITERATOR
# 
CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a INT);
CREATE VIEW v1 AS SELECT a FROM t2;
CREATE PROCEDURE proc() SELECT * FROM t1 NATURAL JOIN v1;
ALTER TABLE t2 CHANGE COLUMN a b CHAR;

CALL proc();
ERROR HY000: View 'test.v1' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
CALL proc();
ERROR HY000: View 'test.v1' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them

DROP TABLE t1,t2;
DROP VIEW v1;
DROP PROCEDURE proc;

# --
# -- Bug 11765684 - 58674: SP-cache does not detect changes in
# -- pre-locking list caused by triggers
# --- 
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
DROP TABLE IF EXISTS t3;
DROP PROCEDURE IF EXISTS p1;
CREATE TABLE t1(a INT);
CREATE TABLE t2(a INT);
CREATE TABLE t3(a INT);
CREATE PROCEDURE p1()
INSERT INTO t1(a) VALUES (1);

CREATE TRIGGER t1_ai AFTER INSERT ON t1
FOR EACH ROW
INSERT INTO t2(a) VALUES (new.a);

CALL p1();

CREATE TRIGGER t1_bi BEFORE INSERT ON t1
FOR EACH ROW
INSERT INTO t3(a) VALUES (new.a);

CALL p1();

DROP TABLE t1, t2, t3;
DROP PROCEDURE p1;


# --
# -- Bug#12652769 - 61470: case operator in stored routine retains old
# -- value of input parameter
# --- 
DROP TABLE IF EXISTS t1;
DROP PROCEDURE IF EXISTS p1;
CREATE TABLE t1 (s1 CHAR(5) CHARACTER SET utf8);
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
INSERT INTO t1 VALUES ('a');
CREATE PROCEDURE p1(dt DATETIME, i INT)
BEGIN
SELECT
CASE
WHEN i = 1 THEN 2
ELSE dt
END AS x1;
SELECT
CASE _latin1'a'
      WHEN _utf8'a' THEN 'A'
    END AS x2;
SELECT
CASE _utf8'a'
      WHEN _latin1'a' THEN _utf8'A'
    END AS x3;
SELECT
CASE s1
WHEN _latin1'a' THEN _latin1'b'
      ELSE _latin1'c'
    END AS x4
FROM t1;
END|
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.

CALL p1('2011-04-03 05:14:10', 1);
x1
2
x2
A
x3
A
x4
b
Warnings:
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
Warning	3719	'utf8' is currently an alias for the character set UTF8MB3, but will be an alias for UTF8MB4 in a future release. Please consider using UTF8MB4 in order to be unambiguous.
CALL p1('2011-04-03 05:14:11', 2);
x1
2011-04-03 05:14:11
x2
A
x3
A
x4
b
CALL p1('2011-04-03 05:14:12', 2);
x1
2011-04-03 05:14:12
x2
A
x3
A
x4
b
CALL p1('2011-04-03 05:14:13', 2);
x1
2011-04-03 05:14:13
x2
A
x3
A
x4
b

DROP TABLE t1;
DROP PROCEDURE p1;

#
# Bug#12621017 - Crash if a sp variable is used in the
#                limit clause of a set statement
#
DROP TABLE IF EXISTS t1;
DROP PROCEDURE IF EXISTS p1;
DROP PROCEDURE IF EXISTS p2;
CREATE TABLE t1 (c1 INT);
INSERT INTO t1 VALUES (1);
CREATE PROCEDURE p1() 
BEGIN 
DECLARE foo, cnt INT UNSIGNED DEFAULT 1; 
SET foo = (SELECT MIN(c1) FROM t1 LIMIT cnt); 
END|
CREATE PROCEDURE p2()
BEGIN
DECLARE iLimit INT;
DECLARE iVal INT;
DECLARE cur1 CURSOR FOR
SELECT c1 FROM t1
LIMIT iLimit;
SET iLimit=1;
OPEN cur1;
FETCH cur1 INTO iVal;
END|
CALL p1();
CALL p2();
DROP PROCEDURE p1;
DROP PROCEDURE p2;
DROP TABLE t1;

# Bug#13805127: Stored program cache produces wrong result in same THD

CREATE PROCEDURE p1(x INT UNSIGNED)
BEGIN
SELECT c1, t2.c2, count(c3)
FROM
(
SELECT 3 as c2 FROM dual WHERE x = 1
UNION
SELECT 2       FROM dual WHERE x = 1 OR x = 2
) AS t1,
(
SELECT '2012-03-01 01:00:00' AS c1, 3 as c2, 1 as c3 FROM dual
UNION
SELECT '2012-03-01 02:00:00',       3,       2       FROM dual
UNION
SELECT '2012-03-01 01:00:00',       2,       1       FROM dual
) AS t2
WHERE t2.c2 = t1.c2
GROUP BY c1 , c2
ORDER BY c1 , c2
;
END|

CALL p1(1);
c1	c2	count(c3)
2012-03-01 01:00:00	2	1
2012-03-01 01:00:00	3	1
2012-03-01 02:00:00	3	1
CALL p1(2);
c1	c2	count(c3)
2012-03-01 01:00:00	2	1
CALL p1(1);
c1	c2	count(c3)
2012-03-01 01:00:00	2	1
2012-03-01 01:00:00	3	1
2012-03-01 02:00:00	3	1
DROP PROCEDURE p1;
# End of 5.5 test
#
# Bug#12663165 SP DEAD CODE REMOVAL DOESN'T UNDERSTAND CONTINUE HANDLERS
#
DROP FUNCTION IF EXISTS f1;
CREATE FUNCTION f1() RETURNS INT
BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION BEGIN END;
BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION RETURN f1();
BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION RETURN f1();
RETURN f1();
END;
END;
RETURN 1;
END $
SELECT f1();
f1()
1
DROP FUNCTION f1;
#
# Bug#12577230
# RERUN OF STORED FUNCTION CAUSES SEGFAULT IN MAKE_JOIN_SELECT
#
CREATE TABLE t1 (a INT) ENGINE=myisam;
INSERT INTO t1 VALUES (1);
CREATE VIEW v1 AS SELECT a FROM t1;
CREATE PROCEDURE p1()
SELECT 1 FROM v1 JOIN t1 ON v1.a
WHERE (SELECT 1 FROM t1 WHERE v1.a)
;
CALL p1();
1
1
CALL p1();
1
1
DROP PROCEDURE p1;
prepare s from 'select 1 from `v1` join `t1` on `v1`.`a`
where (select 1 from `t1` where `v1`.`a`)';
execute s;
1
1
execute s;
1
1
prepare s from 'select 1 from `v1` join `t1` on `v1`.`a`';
execute s;
1
1
execute s;
1
1
prepare s from 'select 1 from `v1` join `t1` on `v1`.`a` join t1 as t2
on v1.a';
execute s;
1
1
execute s;
1
1
create view v2 as select 0 as a from t1;
prepare s from 'select 1 from `v2` join `t1` on `v2`.`a` join v1 on `v1`.`a`';
execute s;
1
execute s;
1
prepare s from 'select 1 from `v2` join `t1` on `v2`.`a`, v1 where `v1`.`a`';
execute s;
1
execute s;
1
DROP TABLE t1;
DROP VIEW v1,v2;
#
# WL#2111: Add non-reserved ROW_COUNT keyword.
#
DROP PROCEDURE IF EXISTS p1;
CREATE PROCEDURE p1()
BEGIN
DECLARE row_count INT DEFAULT 1;
SELECT row_count;
SELECT row_count();
ROW_COUNT: WHILE row_count > 0 DO
SET row_count = row_count - 1;
END WHILE ROW_COUNT;
SELECT ROW_COUNT;
END|
CALL p1();
row_count
1
row_count()
-1
ROW_COUNT
0
DROP PROCEDURE p1;
#
# BUG #11748187 - 35410: STORED FUNCTION: CONFUSING 'ORDER CLAUSE' IN ERROR MESSAGE
#
DROP FUNCTION if exists f1;
CREATE FUNCTION f1 (p_value INT) RETURNS INT DETERMINISTIC RETURN x;
SELECT f1(1);
ERROR 42S22: Unknown column 'x' in 'field list'
DROP FUNCTION f1;
#
# BUG #12872824 (formerly known as 62125): testing stored function
#                result for null incorrectly yields 1292 warning.
DROP FUNCTION IF EXISTS f1;
DROP FUNCTION IF EXISTS f2;
DROP FUNCTION IF EXISTS f3;
DROP FUNCTION IF EXISTS f4;
CREATE FUNCTION f1() RETURNS VARCHAR(1)
BEGIN RETURN 'X'; END;/
CREATE FUNCTION f2() RETURNS CHAR(1)
BEGIN RETURN 'X'; END;/
CREATE FUNCTION f3() RETURNS VARCHAR(1)
BEGIN RETURN NULL; END;/
CREATE FUNCTION f4() RETURNS CHAR(1)
BEGIN RETURN NULL; END;/
SELECT f1() IS NULL;
f1() IS NULL
0
SELECT f2() IS NULL;
f2() IS NULL
0
SELECT f3() IS NULL;
f3() IS NULL
1
SELECT f4() IS NULL;
f4() IS NULL
1
DROP FUNCTION f1;
DROP FUNCTION f2;
DROP FUNCTION f3;
DROP FUNCTION f4;
#
#
# WL#6230: Remove 'SET = DEFAULT'
#
CREATE TABLE t1(a INT);
CREATE PROCEDURE p(p INT)
SET p = DEFAULT|
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT' at line 2
CREATE PROCEDURE p()
BEGIN
DECLARE v INT;
SET v = DEFAULT;
END|
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT;
END' at line 4
CREATE PROCEDURE p()
BEGIN
DECLARE v INT DEFAULT 1;
SET v = DEFAULT;
END|
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT;
END' at line 4
CREATE PROCEDURE p()
BEGIN
DECLARE v INT DEFAULT (SELECT * FROM t1);
SET v = DEFAULT;
END|
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT;
END' at line 4
CREATE TRIGGER t1_bu BEFORE UPDATE ON t1 FOR EACH ROW
BEGIN
SET NEW.a = DEFAULT;
END|
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT;
END' at line 3

# Check that setting system variables to DEFAULT still works in SP.

CREATE PROCEDURE p1()
SET @@default_storage_engine = DEFAULT;
SET @default_storage_engine_saved = @@default_storage_engine;
SELECT @@default_storage_engine;
@@default_storage_engine
InnoDB
SET @@default_storage_engine = InnoDB;
SELECT @@default_storage_engine;
@@default_storage_engine
InnoDB
CALL p1();
SELECT @@default_storage_engine;
@@default_storage_engine
InnoDB
SET @@default_storage_engine = @default_storage_engine_saved;
DROP PROCEDURE p1;
DROP TABLE t1;
# End of 5.6 tests
#
# BUG 18484649 - STRICT MODE + CURSOR FETCH INTO WRONG TYPE, ASSERTION
#                IN PROTOCOL::END_STATEMENT
#
SET @org_mode= @@sql_mode;
SET sql_mode= 'STRICT_TRANS_TABLES';
Warnings:
Warning	3135	'NO_ZERO_DATE', 'NO_ZERO_IN_DATE' and 'ERROR_FOR_DIVISION_BY_ZERO' sql modes should be used with strict mode. They will be merged with strict mode in a future release.
CREATE TABLE t1(a INT) ENGINE= InnoDB;
INSERT INTO t1 VALUES (123456);
CREATE PROCEDURE p1() 
BEGIN
DECLARE `v` TINYINT; 
DECLARE `c` CURSOR FOR SELECT a FROM t1; 
BEGIN
OPEN c; 
FETCH c INTO v;   
CLOSE c; 
END; 
END $
# With the fix, Call to p1 will result in error as the routine was
# created in STRICT MODE.
CALL p1();
ERROR 22003: Out of range value for column 'v' at row 1
# Clean-up
SET sql_mode= @org_mode;
DROP PROCEDURE p1;
DROP TABLE t1;
#
# Bug#20583321: CRASH ON PS_THREAD_INFO / SYS USAGE
#
SET sql_mode = 'only_full_group_by';
CREATE TABLE t1 ( a INT, b INT );
CREATE TABLE t2 ( a INT );
CREATE PROCEDURE p1 ()
BEGIN
DECLARE output INT;
SET output = ( SELECT b FROM t1 LEFT JOIN t2 USING ( a ) GROUP BY t1.a );
END $$
CALL p1();
ERROR 42000: Expression #1 of SELECT list is not in GROUP BY clause and contains nonaggregated column 'test.t1.b' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
CALL p1();
ERROR 42000: Expression #1 of SELECT list is not in GROUP BY clause and contains nonaggregated column 'test.t1.b' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
DROP PROCEDURE p1;
PREPARE s FROM
'SET @x = ( SELECT b FROM t1 LEFT JOIN t2 USING ( a ) GROUP BY t1.a )';
ERROR 42000: Expression #1 of SELECT list is not in GROUP BY clause and contains nonaggregated column 'test.t1.b' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
DROP TABLE t1, t2;
SET sql_mode = DEFAULT;
#
# ASSERTION FAILED: FALSE IN CREATE_TMP_FIELD WITH UNKNOWN OUTER FIELD
#
CREATE TABLE t1 ( a INT );
SET @v = 1;
PREPARE stmt FROM 'SELECT 1 FROM ( SELECT ? FROM t1 GROUP BY a ) al;';
EXECUTE stmt USING @v;
1
PREPARE stmt FROM 'CREATE TABLE t2 AS SELECT ? FROM t1';
EXECUTE stmt USING @v;
DROP TABLE t1, t2;
#
# Bug #18599181: CALLING A ROUTINE WITHOUT SPECIFYING DATABASE PREFIX
#                MAY RETURN ERROR 1370
#
CREATE DATABASE db1;
CREATE FUNCTION f1() RETURNS INT RETURN 1;
CREATE FUNCTION db1.f2() RETURNS INT RETURN test.f1();
CREATE USER myuser@'localhost';
GRANT ALL ON db1.* TO myuser@'localhost';
SELECT f2();
f2()
1
SELECT f2();
f2()
1
DROP DATABASE db1;
DROP USER myuser@localhost;
DROP FUNCTION f1;
#
# WL#7897 -- Use DD API for Stored Routines.
# Basic test to verify:
#   i) The table mysql.proc does not exists any more.
#  ii) Stored routine metadata is still available with the
#      information_schema tables "routines" and "parameters".
#      These tables are filled from the new DD tables mysql.routine
#      and mysql.parameter.
# iii) Basic test to cover "READS SQL DATA" in ALTER operation.
#
CREATE FUNCTION f1(a INT) RETURNS INT return 1;
CREATE PROCEDURE p1(IN a INT, INOUT b INT, OUT c INT) select 1;
# The table mysql.proc does not exists any more.
SELECT * FROM mysql.proc;
ERROR 42S02: Table 'mysql.proc' doesn't exist
# Metadata of stored function f1.
SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_NAME = 'f1';
SPECIFIC_NAME	ROUTINE_CATALOG	ROUTINE_SCHEMA	ROUTINE_NAME	ROUTINE_TYPE	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	DATETIME_PRECISION	CHARACTER_SET_NAME	COLLATION_NAME	DTD_IDENTIFIER	ROUTINE_BODY	ROUTINE_DEFINITION	EXTERNAL_NAME	EXTERNAL_LANGUAGE	PARAMETER_STYLE	IS_DETERMINISTIC	SQL_DATA_ACCESS	SQL_PATH	SECURITY_TYPE	CREATED	LAST_ALTERED	SQL_MODE	ROUTINE_COMMENT	DEFINER	CHARACTER_SET_CLIENT	COLLATION_CONNECTION	DATABASE_COLLATION
f1	def	test	f1	FUNCTION	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	SQL	return 1	NULL	SQL	SQL	NO	CONTAINS SQL	NULL	DEFINER	<created>	<modified>	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION		root@localhost	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
SELECT * FROM INFORMATION_SCHEMA.PARAMETERS WHERE SPECIFIC_NAME = 'f1';
SPECIFIC_CATALOG	SPECIFIC_SCHEMA	SPECIFIC_NAME	ORDINAL_POSITION	PARAMETER_MODE	PARAMETER_NAME	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	DATETIME_PRECISION	CHARACTER_SET_NAME	COLLATION_NAME	DTD_IDENTIFIER	ROUTINE_TYPE
def	test	f1	0	NULL	NULL	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	FUNCTION
def	test	f1	1	IN	a	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	FUNCTION
# Metadata of stored procedure p1.
SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_NAME = 'p1';
SPECIFIC_NAME	ROUTINE_CATALOG	ROUTINE_SCHEMA	ROUTINE_NAME	ROUTINE_TYPE	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	DATETIME_PRECISION	CHARACTER_SET_NAME	COLLATION_NAME	DTD_IDENTIFIER	ROUTINE_BODY	ROUTINE_DEFINITION	EXTERNAL_NAME	EXTERNAL_LANGUAGE	PARAMETER_STYLE	IS_DETERMINISTIC	SQL_DATA_ACCESS	SQL_PATH	SECURITY_TYPE	CREATED	LAST_ALTERED	SQL_MODE	ROUTINE_COMMENT	DEFINER	CHARACTER_SET_CLIENT	COLLATION_CONNECTION	DATABASE_COLLATION
p1	def	test	p1	PROCEDURE		NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	SQL	select 1	NULL	SQL	SQL	NO	CONTAINS SQL	NULL	DEFINER	<created>	<modified>	ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION		root@localhost	utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
SELECT * FROM INFORMATION_SCHEMA.PARAMETERS WHERE SPECIFIC_NAME = 'p1';
SPECIFIC_CATALOG	SPECIFIC_SCHEMA	SPECIFIC_NAME	ORDINAL_POSITION	PARAMETER_MODE	PARAMETER_NAME	DATA_TYPE	CHARACTER_MAXIMUM_LENGTH	CHARACTER_OCTET_LENGTH	NUMERIC_PRECISION	NUMERIC_SCALE	DATETIME_PRECISION	CHARACTER_SET_NAME	COLLATION_NAME	DTD_IDENTIFIER	ROUTINE_TYPE
def	test	p1	1	IN	a	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	PROCEDURE
def	test	p1	2	INOUT	b	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	PROCEDURE
def	test	p1	3	OUT	c	int	NULL	NULL	10	0	NULL	NULL	NULL	int(11)	PROCEDURE
# Basic test to cover "READS SQL DATA" in ALTER operation.
ALTER FUNCTION f1 READS SQL DATA;
DROP FUNCTION f1;
DROP PROCEDURE p1;
#
# WL#9262: All system tables should support 32 character length user names
#
#This should just work with username + hostname of length 93 as DEFINER
CREATE USER user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char;
#For procedure
CREATE DEFINER=user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char PROCEDURE test.proc_test() SELECT CURRENT_USER();
#and for function
CREATE DEFINER=user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char FUNCTION test.f_test() RETURNS INT RETURN 1;
SHOW PROCEDURE STATUS LIKE 'proc_test';
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	proc_test	PROCEDURE	user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char	#	#	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
DROP PROCEDURE test.proc_test;
SHOW FUNCTION STATUS LIKE 'f_test';
Db	Name	Type	Definer	Modified	Created	Security_type	Comment	character_set_client	collation_connection	Database Collation
test	f_test	FUNCTION	user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char	#	#	DEFINER		utf8mb4	utf8mb4_0900_ai_ci	utf8mb4_0900_ai_ci
DROP FUNCTION test.f_test;
DROP USER user_name_robert_golebiowski1234@oh_my_gosh_this_is_a_long_hostname_look_at_it_it_has_60_char;
set @old_concurrent_insert= @@global.concurrent_insert;
set @@global.concurrent_insert= 0;
drop table if exists t1,t3;
drop procedure if exists bug4902|
create procedure bug4902()
begin
show grants for 'root'@'localhost';
end|
call bug4902()|
Grants for root@localhost
GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, RELOAD, SHUTDOWN, PROCESS, FILE, REFERENCES, INDEX, ALTER, SHOW DATABASES, SUPER, CREATE TEMPORARY TABLES, LOCK TABLES, EXECUTE, REPLICATION SLAVE, REPLICATION CLIENT, CREATE VIEW, SHOW VIEW, CREATE ROUTINE, ALTER ROUTINE, CREATE USER, EVENT, TRIGGER, CREATE TABLESPACE, CREATE ROLE, DROP ROLE ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT APPLICATION_PASSWORD_ADMIN,AUDIT_ADMIN,BACKUP_ADMIN,BINLOG_ADMIN,BINLOG_ENCRYPTION_ADMIN,CLONE_ADMIN,CONNECTION_ADMIN,ENCRYPTION_KEY_ADMIN,GROUP_REPLICATION_ADMIN,INNODB_REDO_LOG_ARCHIVE,PERSIST_RO_VARIABLES_ADMIN,REPLICATION_APPLIER,REPLICATION_SLAVE_ADMIN,RESOURCE_GROUP_ADMIN,RESOURCE_GROUP_USER,ROLE_ADMIN,SERVICE_CONNECTION_ADMIN,SESSION_VARIABLES_ADMIN,SET_USER_ID,SYSTEM_USER,SYSTEM_VARIABLES_ADMIN,TABLE_ENCRYPTION_ADMIN,XA_RECOVER_ADMIN ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT PROXY ON ''@'' TO 'root'@'localhost' WITH GRANT OPTION
call bug4902()|
Grants for root@localhost
GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, RELOAD, SHUTDOWN, PROCESS, FILE, REFERENCES, INDEX, ALTER, SHOW DATABASES, SUPER, CREATE TEMPORARY TABLES, LOCK TABLES, EXECUTE, REPLICATION SLAVE, REPLICATION CLIENT, CREATE VIEW, SHOW VIEW, CREATE ROUTINE, ALTER ROUTINE, CREATE USER, EVENT, TRIGGER, CREATE TABLESPACE, CREATE ROLE, DROP ROLE ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT APPLICATION_PASSWORD_ADMIN,AUDIT_ADMIN,BACKUP_ADMIN,BINLOG_ADMIN,BINLOG_ENCRYPTION_ADMIN,CLONE_ADMIN,CONNECTION_ADMIN,ENCRYPTION_KEY_ADMIN,GROUP_REPLICATION_ADMIN,INNODB_REDO_LOG_ARCHIVE,PERSIST_RO_VARIABLES_ADMIN,REPLICATION_APPLIER,REPLICATION_SLAVE_ADMIN,RESOURCE_GROUP_ADMIN,RESOURCE_GROUP_USER,ROLE_ADMIN,SERVICE_CONNECTION_ADMIN,SESSION_VARIABLES_ADMIN,SET_USER_ID,SYSTEM_USER,SYSTEM_VARIABLES_ADMIN,TABLE_ENCRYPTION_ADMIN,XA_RECOVER_ADMIN ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT PROXY ON ''@'' TO 'root'@'localhost' WITH GRANT OPTION
drop procedure bug4902|
drop procedure if exists bug4902_2|
create procedure bug4902_2()
begin
show processlist;
end|
call bug4902_2()|
show warnings|
Level	Code	Message
call bug4902_2()|
show warnings|
Level	Code	Message
drop procedure bug4902_2|
drop procedure if exists bug6807|
create procedure bug6807()
begin
declare id int;
set id = connection_id();
kill query id;
select 'Not reached';
end|
call bug6807()|
ERROR 70100: Query execution was interrupted
call bug6807()|
ERROR 70100: Query execution was interrupted
drop procedure bug6807|
SET sql_mode = 'NO_ENGINE_SUBSTITUTION'|
drop function if exists bug10100f|
drop procedure if exists bug10100p|
drop procedure if exists bug10100t|
drop procedure if exists bug10100pt|
drop procedure if exists bug10100pv|
drop procedure if exists bug10100pd|
drop procedure if exists bug10100pc|
create function bug10100f(prm int) returns int
begin
if prm > 1 then
return prm * bug10100f(prm - 1);
end if;
return 1;
end|
create procedure bug10100p(prm int, inout res int)
begin
set res = res * prm;
if prm > 1 then
call bug10100p(prm - 1, res);
end if;
end|
create procedure bug10100t(prm int)
begin
declare res int;
set res = 1;
call bug10100p(prm, res);
select res;
end|
create table t3 (a int)|
insert into t3 values (0)|
create view v1 as select a from t3;
create procedure bug10100pt(level int, lim int)
begin
if level < lim then
update t3 set a=level;
FLUSH TABLES;
call bug10100pt(level+1, lim);
else
select * from t3;
end if;
end|
create procedure bug10100pv(level int, lim int)
begin
if level < lim then
update v1 set a=level;
FLUSH TABLES;
call bug10100pv(level+1, lim);
else
select * from v1;
end if;
end|
prepare stmt2 from "select * from t3;";
create procedure bug10100pd(level int, lim int)
begin
if level < lim then
select level;
prepare stmt1 from "update t3 set a=a+2";
execute stmt1;
FLUSH TABLES;
execute stmt1;
FLUSH TABLES;
execute stmt1;
FLUSH TABLES;
deallocate prepare stmt1;
execute stmt2;
select * from t3;
call bug10100pd(level+1, lim);
else
execute stmt2;
end if;
end|
create procedure bug10100pc(level int, lim int)
begin
declare lv int;
declare c cursor for select a from t3;
open c;
if level < lim then
select level;
fetch c into lv;
select lv;
update t3 set a=level+lv;
FLUSH TABLES;
call bug10100pc(level+1, lim);
else
select * from t3;
end if;
close c;
end|
set @@max_sp_recursion_depth=255|
set @var=1|
call bug10100p(255, @var)|
call bug10100pt(1,255)|
call bug10100pv(1,255)|
call bug10100pd(1,255)|
call bug10100pc(1,255)|
set @@max_sp_recursion_depth=0|
deallocate prepare stmt2|
drop function bug10100f|
drop procedure bug10100p|
drop procedure bug10100t|
drop procedure bug10100pt|
drop procedure bug10100pv|
drop procedure bug10100pd|
drop procedure bug10100pc|
drop view v1|
drop table t3|
SET sql_mode = default;
drop procedure if exists bug15298_1;
drop procedure if exists bug15298_2;
create user 'mysqltest_1'@'localhost';
grant all privileges on test.* to 'mysqltest_1'@'localhost';
create procedure 15298_1 () sql security definer show grants for current_user;
create procedure 15298_2 () sql security definer show grants;
call 15298_1();
Grants for root@localhost
GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, RELOAD, SHUTDOWN, PROCESS, FILE, REFERENCES, INDEX, ALTER, SHOW DATABASES, SUPER, CREATE TEMPORARY TABLES, LOCK TABLES, EXECUTE, REPLICATION SLAVE, REPLICATION CLIENT, CREATE VIEW, SHOW VIEW, CREATE ROUTINE, ALTER ROUTINE, CREATE USER, EVENT, TRIGGER, CREATE TABLESPACE, CREATE ROLE, DROP ROLE ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT APPLICATION_PASSWORD_ADMIN,AUDIT_ADMIN,BACKUP_ADMIN,BINLOG_ADMIN,BINLOG_ENCRYPTION_ADMIN,CLONE_ADMIN,CONNECTION_ADMIN,ENCRYPTION_KEY_ADMIN,GROUP_REPLICATION_ADMIN,INNODB_REDO_LOG_ARCHIVE,PERSIST_RO_VARIABLES_ADMIN,REPLICATION_APPLIER,REPLICATION_SLAVE_ADMIN,RESOURCE_GROUP_ADMIN,RESOURCE_GROUP_USER,ROLE_ADMIN,SERVICE_CONNECTION_ADMIN,SESSION_VARIABLES_ADMIN,SET_USER_ID,SYSTEM_USER,SYSTEM_VARIABLES_ADMIN,TABLE_ENCRYPTION_ADMIN,XA_RECOVER_ADMIN ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT PROXY ON ''@'' TO 'root'@'localhost' WITH GRANT OPTION
call 15298_2();
Grants for root@localhost
GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, RELOAD, SHUTDOWN, PROCESS, FILE, REFERENCES, INDEX, ALTER, SHOW DATABASES, SUPER, CREATE TEMPORARY TABLES, LOCK TABLES, EXECUTE, REPLICATION SLAVE, REPLICATION CLIENT, CREATE VIEW, SHOW VIEW, CREATE ROUTINE, ALTER ROUTINE, CREATE USER, EVENT, TRIGGER, CREATE TABLESPACE, CREATE ROLE, DROP ROLE ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT APPLICATION_PASSWORD_ADMIN,AUDIT_ADMIN,BACKUP_ADMIN,BINLOG_ADMIN,BINLOG_ENCRYPTION_ADMIN,CLONE_ADMIN,CONNECTION_ADMIN,ENCRYPTION_KEY_ADMIN,GROUP_REPLICATION_ADMIN,INNODB_REDO_LOG_ARCHIVE,PERSIST_RO_VARIABLES_ADMIN,REPLICATION_APPLIER,REPLICATION_SLAVE_ADMIN,RESOURCE_GROUP_ADMIN,RESOURCE_GROUP_USER,ROLE_ADMIN,SERVICE_CONNECTION_ADMIN,SESSION_VARIABLES_ADMIN,SET_USER_ID,SYSTEM_USER,SYSTEM_VARIABLES_ADMIN,TABLE_ENCRYPTION_ADMIN,XA_RECOVER_ADMIN ON *.* TO `root`@`localhost` WITH GRANT OPTION
GRANT PROXY ON ''@'' TO 'root'@'localhost' WITH GRANT OPTION
drop user mysqltest_1@localhost;
drop procedure 15298_1;
drop procedure 15298_2;
drop table if exists t1;
drop procedure if exists p1;
create table t1 (value varchar(15)) engine=Myisam;
create procedure p1() update t1 set value='updated' where value='old';
call p1();
insert into t1 (value) values ("old");
select get_lock('b26162',120);
get_lock('b26162',120)
1
select 'rl_acquirer', value from t1 where get_lock('b26162',120);;
set session low_priority_updates=on;
call p1();;
select 'rl_contender', value from t1;
rl_contender	value
rl_contender	old
select release_lock('b26162');
release_lock('b26162')
1
rl_acquirer	value
rl_acquirer	old
drop procedure p1;
drop table t1;
set session low_priority_updates=default;
INSERT INTO mysql.user (Host, User, Select_priv, Insert_priv, Update_priv,
Delete_priv, Create_priv, Drop_priv, Reload_priv, Shutdown_priv, Process_priv, File_priv,
Grant_priv, References_priv, Index_priv, Alter_priv, Show_db_priv, Super_priv,
Create_tmp_table_priv, Lock_tables_priv, Execute_priv, Repl_slave_priv, Repl_client_priv,
Create_view_priv, Show_view_priv, Create_routine_priv, Alter_routine_priv,
Create_user_priv, ssl_type, ssl_cipher, x509_issuer, x509_subject, max_questions,
max_updates, max_connections, max_user_connections)
VALUES('%', 'mysqltest_1', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'N', 'N', 'N',
'N', 'N', 'N', 'Y', 'Y', 'N', 'N', 'Y', 'Y', 'N', 'N', 'N', 'N', 'N', 'Y', 'Y', 'N', '',
'', '', '', '0', '0', '0', '0');
FLUSH PRIVILEGES;
CREATE PROCEDURE p1(i INT) BEGIN END;
DROP PROCEDURE p1;
DELETE FROM mysql.user WHERE User='mysqltest_1';
FLUSH PRIVILEGES;
#
# Bug#44521 Prepared Statement: CALL p() - crashes: `! thd->main_da.is_sent' failed et.al.
#
SELECT GET_LOCK('Bug44521', 0);
GET_LOCK('Bug44521', 0)
1
** Connection con1
CREATE PROCEDURE p()
BEGIN
SELECT 1;
SELECT GET_LOCK('Bug44521', 100);
SELECT 2;
END$
CALL p();;
** Default connection
SELECT RELEASE_LOCK('Bug44521');
RELEASE_LOCK('Bug44521')
1
DROP PROCEDURE p;
CREATE TABLE t1(a int);
INSERT INTO t1 VALUES (1);
CREATE FUNCTION f1 (inp TEXT) RETURNS INT NO SQL RETURN GET_LOCK('Bug47736', 200);
CREATE VIEW v1 AS SELECT f1('a') FROM t1;
SELECT GET_LOCK('Bug47736', 0);
GET_LOCK('Bug47736', 0)
1
SELECT * FROM v1;;
KILL QUERY ID;
ERROR 70100: Query execution was interrupted
DROP VIEW v1;
DROP TABLE t1;
DROP FUNCTION f1;
# ------------------------------------------------------------------
# -- End of 5.1 tests
# ------------------------------------------------------------------
#
# Test for bug#11763757 "56510: ERROR 42000: FUNCTION DOES NOT EXIST
# IF NOT-PRIV USER RECONNECTS ".
#
# The real problem was that server was unable handle properly stored
# functions in databases which names contained dot.
#
DROP DATABASE IF EXISTS `my.db`;
create database `my.db`;
use `my.db`;
CREATE FUNCTION f1(a int) RETURNS INT RETURN a;
# Create new connection.
USE `my.db`;
SELECT f1(1);
f1(1)
1
SELECT `my.db`.f1(2);
`my.db`.f1(2)
2
# Switching to default connection.
DROP DATABASE `my.db`;
USE test;
#
# Bug#11763507 - 56224: FUNCTION NAME IS CASE-SENSITIVE
#
SET @@SQL_MODE = '';
CREATE EVENT teste_bug11763507 ON SCHEDULE AT CURRENT_TIMESTAMP + INTERVAL 1 HOUR
DO SELECT 1 $
SHOW EVENTS LIKE 'teste_bug11763507';
Db	Name	Definer	Time zone	Type	Execute at	Interval value	Interval field	Starts	Ends	Status	Originator	character_set_client	collation_connection	Database Collation
test	teste_bug11763507	root@localhost	SYSTEM	ONE TIME	#	#	#	#	NULL	ENABLED	1	utf8mb4	utf8mb4_0900_ai_ci	DATABASE_COLLATION
SHOW EVENTS LIKE 'TESTE_bug11763507';
Db	Name	Definer	Time zone	Type	Execute at	Interval value	Interval field	Starts	Ends	Status	Originator	character_set_client	collation_connection	Database Collation
test	teste_bug11763507	root@localhost	SYSTEM	ONE TIME	#	#	#	#	NULL	ENABLED	1	utf8mb4	utf8mb4_0900_ai_ci	DATABASE_COLLATION
SHOW CREATE EVENT teste_bug11763507;
Event	sql_mode	time_zone	Create Event	character_set_client	collation_connection	Database Collation
teste_bug11763507		SYSTEM	#	utf8mb4	utf8mb4_0900_ai_ci	DATABASE_COLLATION
SHOW CREATE EVENT TESTE_bug11763507;
Event	sql_mode	time_zone	Create Event	character_set_client	collation_connection	Database Collation
teste_bug11763507		SYSTEM	#	utf8mb4	utf8mb4_0900_ai_ci	DATABASE_COLLATION
DROP EVENT teste_bug11763507;
#END OF BUG#11763507 test.

# WL#4179: Stored programs: validation of stored program statements
#
# Test handle of metadata changes with events.

CREATE TABLE t1 (a INT, b INT);
CREATE TABLE t2 (a INT, b INT);
CREATE TABLE t3 (a INT);
INSERT INTO t1 VALUES (1, 2);
SELECT COUNT(*) = 1 FROM information_schema.processlist
WHERE user = 'event_scheduler' AND command = 'Daemon';
COUNT(*) = 1
1
SELECT GET_LOCK('e1_lock', 60);
GET_LOCK('e1_lock', 60)
1
CREATE EVENT e1 ON SCHEDULE EVERY 1 SECOND STARTS NOW() DO
BEGIN
DECLARE EXIT HANDLER FOR 1136 BEGIN
INSERT INTO t3 VALUES (1);
END; -- ER_WRONG_VALUE_COUNT_ON_ROW
SELECT GET_LOCK('e1_lock', 60);
SELECT RELEASE_LOCK('e1_lock');
INSERT INTO t2 SELECT * FROM t1;
END|
SELECT RELEASE_LOCK('e1_lock');
RELEASE_LOCK('e1_lock')
1
SELECT GET_LOCK('e1_lock', 60);
GET_LOCK('e1_lock', 60)
1
ALTER TABLE t1 ADD COLUMN (c INT);
SELECT RELEASE_LOCK('e1_lock');
RELEASE_LOCK('e1_lock')
1
# Wait for new rows in t3. That means, the even has been executed,
# and INSERT INTO t2 failed because now t1 has 3 columns.
DROP EVENT e1;
DROP TABLE t1, t2, t3;
set @@global.concurrent_insert= @old_concurrent_insert;
#
# WL#2284: Increase the length of a user name
#
CREATE DATABASE test1;
CREATE TABLE test1.t1 (
int_field INTEGER UNSIGNED NOT NULL,
char_field CHAR(10),
INDEX(`int_field`)
);
CREATE USER user_name_len_16@localhost;
CREATE USER user_name_len_22_01234@localhost;
CREATE USER user_name_len_32_012345678901234@localhost;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user_name_len_16@localhost;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM user_name_len_22_01234@localhost;
# Check that user_name_len16 has no SELECT permission ON t1
SELECT * FROM test1.t1;
ERROR 42000: SELECT command denied to user 'user_name_len_16'@'localhost' for table 't1'
# Check that user_name_len_22_01234 has no SELECT permission ON t1
SELECT * FROM test1.t1;
ERROR 42000: SELECT command denied to user 'user_name_len_22_01234'@'localhost' for table 't1'
GRANT SELECT ON test1.t1 TO user_name_len_22_01234@localhost;
# Check that user_name_len_22_01234 has *now* SELECT permission ON t1
SELECT * FROM test1.t1;
int_field	char_field
CREATE DEFINER=user_name_len_22_01234@localhost PROCEDURE test1.p1_len22()
SELECT * FROM test1.t1;
GRANT EXECUTE ON PROCEDURE test1.p1_len22 TO user_name_len_22_01234@localhost;
GRANT EXECUTE ON PROCEDURE test1.p1_len22 TO user_name_len_16@localhost;
# Now user_name_len_16 should be able to SELECT FROM t1 by calling
# p1_len22 procedure
CALL test1.p1_len22();
int_field	char_field
CREATE DEFINER=user_name_len_33_0123456789012345@localhost PROCEDURE test1.p1_len33()
SELECT * FROM test1.t1;
ERROR HY000: String 'user_name_len_33_0123456789012345' is too long for user name (should be no longer than 32)
# REVOKE the SELECT permission from user_name_len_22_01234
REVOKE SELECT ON test1.t1 FROM user_name_len_22_01234@localhost;
# and GRANT it to user_name_len_32_012345678901234
GRANT SELECT ON test1.t1 TO user_name_len_32_012345678901234@localhost;
CREATE DEFINER = user_name_len_32_012345678901234@localhost FUNCTION test1.f1_len32() RETURNS INT
RETURN (SELECT COUNT(*) FROM test1.t1);
GRANT EXECUTE ON FUNCTION test1.f1_len32 TO user_name_len_32_012345678901234@localhost;
GRANT EXECUTE ON FUNCTION test1.f1_len32 TO user_name_len_22_01234@localhost;
GRANT SELECT ON test1.t1 TO user_name_len_22_01234@localhost;
# Now user_name_len_22_01234 should be able to SELECT COUNT(*) FROM t1
# by calling f1_len32 function
SELECT test1.f1_len32();
test1.f1_len32()
0
# Recreate test1.p1_len22, this time with Security Context set to INVOKER
DROP PROCEDURE test1.p1_len22;
# Make sure user_name_len_22_01234 has SELECT privileges on test.t1
SELECT * FROM test1.t1;
int_field	char_field
CREATE DEFINER=user_name_len_22_01234@localhost PROCEDURE test1.p1_len22()
SQL SECURITY INVOKER
SELECT * FROM test1.t1;
GRANT EXECUTE ON PROCEDURE test1.p1_len22 TO user_name_len_22_01234@localhost;
GRANT EXECUTE ON PROCEDURE test1.p1_len22 TO user_name_len_16@localhost;
# Now user_name_len_16 should *NOT* be able to SELECT COUNT(*) FROM t1
# by calling f1_len22 function as this function is using the INVOKER
# security context
CALL test1.p1_len22();
ERROR 42000: SELECT command denied to user 'user_name_len_16'@'localhost' for table 't1'
CREATE DEFINER=user_name_len_33_0123456789012345@localhost FUNCTION test1.f1_len33() RETURNS INT
RETURN (SELECT COUNT(*) FROM test1.t1);
ERROR HY000: String 'user_name_len_33_0123456789012345' is too long for user name (should be no longer than 32)
DROP DATABASE test1;
DROP USER user_name_len_16@localhost;
DROP USER user_name_len_22_01234@localhost;
DROP USER user_name_len_32_012345678901234@localhost;
#
# BUG#28156802 - MYSQL 8 SERVICE GOES DOWN ON EXECUTING ONE PROCEDURE.
#
CREATE TABLE t1(y INT);
INSERT INTO t1 VALUES (5),(7),(9),(11),(15);
CREATE PROCEDURE `v1`(_limit_val BIGINT, _offset_val BIGINT)
BEGIN
CREATE TEMPORARY TABLE n1 AS (SELECT * FROM t1 LIMIT _limit_val OFFSET _offset_val);
SELECT * FROM n1;
END $$
CALL v1(3,2);
y
9
11
15
DROP PROCEDURE v1;
DROP TABLE t1;