用于EagleEye3.0 规则集漏报和误报测试的示例项目,项目收集于github和gitee
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

207 lines
9.4 KiB

5 months ago
//*****************************************************************************
//
// hw_eeprom.h - Macros used when accessing the EEPROM controller.
//
// Copyright (c) 2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_EEPROM_H__
#define __HW_EEPROM_H__
//*****************************************************************************
//
// The following are defines for the EEPROM register offsets.
//
//*****************************************************************************
#define EEPROM_EESIZE 0x400AF000 // EEPROM Size Information
#define EEPROM_EEBLOCK 0x400AF004 // EEPROM Current Block
#define EEPROM_EEOFFSET 0x400AF008 // EEPROM Current Offset
#define EEPROM_EERDWR 0x400AF010 // EEPROM Read-Write
#define EEPROM_EERDWRINC 0x400AF014 // EEPROM Read-Write with Increment
#define EEPROM_EEDONE 0x400AF018 // EEPROM Done Status
#define EEPROM_EESUPP 0x400AF01C // EEPROM Support Control and
// Status
#define EEPROM_EEUNLOCK 0x400AF020 // EEPROM Unlock
#define EEPROM_EEPROT 0x400AF030 // EEPROM Protection
#define EEPROM_EEPASS0 0x400AF034 // EEPROM Password
#define EEPROM_EEPASS1 0x400AF038 // EEPROM Password
#define EEPROM_EEPASS2 0x400AF03C // EEPROM Password
#define EEPROM_EEINT 0x400AF040 // EEPROM Interrupt
#define EEPROM_EEHIDE 0x400AF050 // EEPROM Block Hide
#define EEPROM_EEDBGME 0x400AF080 // EEPROM Debug Mass Erase
#define EEPROM_EEPROMPP 0x400AFFC0 // EEPROM
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESIZE register.
//
//*****************************************************************************
#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF // Number of 32-Bit Words
#define EEPROM_EESIZE_BLKCNT_M 0x07FF0000 // Number of 16-Word Blocks
#define EEPROM_EESIZE_WORDCNT_S 0
#define EEPROM_EESIZE_BLKCNT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEBLOCK register.
//
//*****************************************************************************
#define EEPROM_EEBLOCK_BLOCK_M 0x0000FFFF // Current Block
#define EEPROM_EEBLOCK_BLOCK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEOFFSET
// register.
//
//*****************************************************************************
#define EEPROM_EEOFFSET_OFFSET_M \
0x0000000F // Current Address Offset
#define EEPROM_EEOFFSET_OFFSET_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWR register.
//
//*****************************************************************************
#define EEPROM_EERDWR_VALUE_M 0xFFFFFFFF // EEPROM Read or Write Data
#define EEPROM_EERDWR_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWRINC
// register.
//
//*****************************************************************************
#define EEPROM_EERDWRINC_VALUE_M \
0xFFFFFFFF // EEPROM Read or Write Data with
// Increment
#define EEPROM_EERDWRINC_VALUE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDONE register.
//
//*****************************************************************************
#define EEPROM_EEDONE_WORKING 0x00000001 // EEPROM Working
#define EEPROM_EEDONE_WKERASE 0x00000004 // Working on an Erase
#define EEPROM_EEDONE_WKCOPY 0x00000008 // Working on a Copy
#define EEPROM_EEDONE_NOPERM 0x00000010 // Write Without Permission
#define EEPROM_EEDONE_WRBUSY 0x00000020 // Write Busy
#define EEPROM_EEDONE_INVPL 0x00000100 // Invalid Program Voltage Level
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESUPP register.
//
//*****************************************************************************
#define EEPROM_EESUPP_START 0x00000001 // Start Erase
#define EEPROM_EESUPP_EREQ 0x00000002 // Erase Required
#define EEPROM_EESUPP_ERETRY 0x00000004 // Erase Must Be Retried
#define EEPROM_EESUPP_PRETRY 0x00000008 // Programming Must Be Retried
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEUNLOCK
// register.
//
//*****************************************************************************
#define EEPROM_EEUNLOCK_UNLOCK_M \
0xFFFFFFFF // EEPROM Unlock
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROT register.
//
//*****************************************************************************
#define EEPROM_EEPROT_PROT_M 0x00000007 // Protection Control
#define EEPROM_EEPROT_PROT_RWNPW \
0x00000000 // This setting is the default. If
// there is no password, the block
// is not protected and is readable
// and writable
#define EEPROM_EEPROT_PROT_RWPW 0x00000001 // If there is a password, the
// block is readable or writable
// only when unlocked
#define EEPROM_EEPROT_PROT_RONPW \
0x00000002 // If there is no password, the
// block is readable, not writable
#define EEPROM_EEPROT_ACC 0x00000008 // Access Control
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS0 register.
//
//*****************************************************************************
#define EEPROM_EEPASS0_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS0_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS1 register.
//
//*****************************************************************************
#define EEPROM_EEPASS1_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS1_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS2 register.
//
//*****************************************************************************
#define EEPROM_EEPASS2_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS2_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEINT register.
//
//*****************************************************************************
#define EEPROM_EEINT_INT 0x00000001 // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE register.
//
//*****************************************************************************
#define EEPROM_EEHIDE_HN_M 0xFFFFFFFE // Hide Block
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDBGME register.
//
//*****************************************************************************
#define EEPROM_EEDBGME_ME 0x00000001 // Mass Erase
#define EEPROM_EEDBGME_KEY_M 0xFFFF0000 // Erase Key
#define EEPROM_EEDBGME_KEY_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROMPP
// register.
//
//*****************************************************************************
#define EEPROM_EEPROMPP_SIZE_M 0x0000001F // EEPROM Size
#define EEPROM_EEPROMPP_SIZE_S 0
#endif // __HW_EEPROM_H__